IPAC2013 - List of Authors (Lebedev, V.A.)

Paper

Title

Page

Project X Injector Experiment: Goals, Plan and Status

1093

A.V. Shemyakin, S.D. Holmes, D.E. Johnson, M. Kaducak, R.D. Kephart, V.A. Lebedev, C.S. Mishra, S. Nagaitsev, N. Solyak, R.P. Stanek, V.P. Yakovlev
Fermilab, Batavia, USA
D. Li
LBNL, Berkeley, California, USA
P.N. Ostroumov
ANL, Argonne, USA

Funding: This work was supported by the U.S. DOE under Contract No.DE-AC02-07CH11359
A multi-MW proton facility, Project X, has been proposed and is currently under development at Fermilab. We are carrying out a program of research and development aimed at integrated systems testing of critical components comprising the front end of the Project X. This program is being undertaken as a key component of the larger Project X R&D program. The successful completion of this program will validate the concept for the Project X front end, thereby minimizing a primary technical risk element within Project X. Integrated systems testing, known as the Project X Injector Experiment (PXIE), will be accomplished with a new test facility under construction at Fermilab and will be completed over the period FY12- 17. PXIE will include an H⁻ ion source, a CW 2.1-MeV RFQ and two superconductive RF (SRF) cryomodules providing up to 25 MeV energy gain at an average beam current of 1 mA (upgradable to 2 mA). Successful systems testing will also demonstrate the viability of novel front end technologies that are expected find applications beyond Project X.

Slides TUOAB102 [1.615 MB]

TUPWA054

PXIE End-to-end Simulations

1829

J.-F. Ostiguy, J.-P. Carneiro, V.A. Lebedev, A. Saini, N. Solyak
Fermilab, Batavia, USA

Funding: US DOE contract DE-AC02-76CH03000.
Construction of PXIE, (Project-X Injector Experiment) has recently begun. The goal is to validate the design of the injector and low energy acceleration front-end for a future Project-X. PXIE operates in CW mode and consists in an ion source, a magnetically focused LEBT, a 162.5 MHz RFQ, a MEBT equipped with high bandwidth traveling wave kickers, a cryomodule equipped with 162.5 MHz half-wave resonators and a single cryomodule based on 325 MHz spoke resonators. The arrangement is meant to be closely representative of a future Project-X front end, and will include a variety of diagnostics. In this contribution we present detailed end-to-end tracking simulations. In particular, we examine possible impact of the RFQ longitudinal distribution, neutralization effects in the LEBT as well as of various imperfections in the MEBT on losses in the first superconducting cavities.

THPWO091

Staging Scenarios for Project-X

3972

N. Solyak, J.-P. Carneiro, V.A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, A. Saini, A. Vivoli, V.P. Yakovlev
Fermilab, Batavia, USA

Funding: US DOE under contract DE-AC02-76CH03000.
Project-X is a high intensity proton source in development at Fermilab. At its heart is a linac based on superconducting technology comprising two distinct sections. The first one operates in CW mode and delivers beam with a flexible time structure to simultaneous experimental programs at 1 and 3 GeV. The second one operates in pulsed mode and accelerates a modest fraction (5%) of the beam from 3 GeV to 8 GeV for accumulation in the existing Main Injector complex. In an era of constrained budgets, construction in stages -with each stage capable of supporting worthy scientific programs - may be advantageous. Requirements for each program, coupled to the physical constraints imposed by the Fermilab site have led to a few possible scenarios, which are discussed in this contribution. In particular, we examine the implications of introducing bends in the linac at 1 and 3 GeV in terms of overall performance, flexibility and cost.

THPWO092

Update of Beam Optics and SRF Cavities for Project X

3975

T.N. Khabiboulline, P. Berrutti, V.A. Lebedev, A. Lunin, T.H. Nicol, J.-F. Ostiguy, T.J. Peterson, L. Ristori, A. Saini, N. Solyak, V.P. Yakovlev
Fermilab, Batavia, USA

The Project X staging [1] requires reconsideration of the beam optics and thus, the SRF system for the 3 GeV CW linac of the Project X. The revised beam optics is presented in the paper as well as revised cavity design for SSR2 section and a new concept of the linac segmentation. The new versions for the Project X cryo-modules for the SSR2 section, low-beta 650 MHz section and high-beta 650 MHz section are discussed. The beam extraction scheme at 1 GeV is discussed also. [1] S. Holmes, “Project X News, Strategy, Meeting Goals,” 2012 Fall Project X Collaboration Meeting, 27-28 November 2012, Fermilab.

Paper	Title	Page
TUOAB102	Project X Injector Experiment: Goals, Plan and Status	1093
	A.V. Shemyakin, S.D. Holmes, D.E. Johnson, M. Kaducak, R.D. Kephart, V.A. Lebedev, C.S. Mishra, S. Nagaitsev, N. Solyak, R.P. Stanek, V.P. Yakovlev Fermilab, Batavia, USA D. Li LBNL, Berkeley, California, USA P.N. Ostroumov ANL, Argonne, USA
	Funding: This work was supported by the U.S. DOE under Contract No.DE-AC02-07CH11359 A multi-MW proton facility, Project X, has been proposed and is currently under development at Fermilab. We are carrying out a program of research and development aimed at integrated systems testing of critical components comprising the front end of the Project X. This program is being undertaken as a key component of the larger Project X R&D program. The successful completion of this program will validate the concept for the Project X front end, thereby minimizing a primary technical risk element within Project X. Integrated systems testing, known as the Project X Injector Experiment (PXIE), will be accomplished with a new test facility under construction at Fermilab and will be completed over the period FY12- 17. PXIE will include an H⁻ ion source, a CW 2.1-MeV RFQ and two superconductive RF (SRF) cryomodules providing up to 25 MeV energy gain at an average beam current of 1 mA (upgradable to 2 mA). Successful systems testing will also demonstrate the viability of novel front end technologies that are expected find applications beyond Project X.
	Slides TUOAB102 [1.615 MB]

TUPWA054	PXIE End-to-end Simulations	1829
	J.-F. Ostiguy, J.-P. Carneiro, V.A. Lebedev, A. Saini, N. Solyak Fermilab, Batavia, USA
	Funding: US DOE contract DE-AC02-76CH03000. Construction of PXIE, (Project-X Injector Experiment) has recently begun. The goal is to validate the design of the injector and low energy acceleration front-end for a future Project-X. PXIE operates in CW mode and consists in an ion source, a magnetically focused LEBT, a 162.5 MHz RFQ, a MEBT equipped with high bandwidth traveling wave kickers, a cryomodule equipped with 162.5 MHz half-wave resonators and a single cryomodule based on 325 MHz spoke resonators. The arrangement is meant to be closely representative of a future Project-X front end, and will include a variety of diagnostics. In this contribution we present detailed end-to-end tracking simulations. In particular, we examine possible impact of the RFQ longitudinal distribution, neutralization effects in the LEBT as well as of various imperfections in the MEBT on losses in the first superconducting cavities.

THPWO091	Staging Scenarios for Project-X	3972
	N. Solyak, J.-P. Carneiro, V.A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, A. Saini, A. Vivoli, V.P. Yakovlev Fermilab, Batavia, USA
	Funding: US DOE under contract DE-AC02-76CH03000. Project-X is a high intensity proton source in development at Fermilab. At its heart is a linac based on superconducting technology comprising two distinct sections. The first one operates in CW mode and delivers beam with a flexible time structure to simultaneous experimental programs at 1 and 3 GeV. The second one operates in pulsed mode and accelerates a modest fraction (5%) of the beam from 3 GeV to 8 GeV for accumulation in the existing Main Injector complex. In an era of constrained budgets, construction in stages -with each stage capable of supporting worthy scientific programs - may be advantageous. Requirements for each program, coupled to the physical constraints imposed by the Fermilab site have led to a few possible scenarios, which are discussed in this contribution. In particular, we examine the implications of introducing bends in the linac at 1 and 3 GeV in terms of overall performance, flexibility and cost.

THPWO092	Update of Beam Optics and SRF Cavities for Project X	3975
	T.N. Khabiboulline, P. Berrutti, V.A. Lebedev, A. Lunin, T.H. Nicol, J.-F. Ostiguy, T.J. Peterson, L. Ristori, A. Saini, N. Solyak, V.P. Yakovlev Fermilab, Batavia, USA
	The Project X staging [1] requires reconsideration of the beam optics and thus, the SRF system for the 3 GeV CW linac of the Project X. The revised beam optics is presented in the paper as well as revised cavity design for SSR2 section and a new concept of the linac segmentation. The new versions for the Project X cryo-modules for the SSR2 section, low-beta 650 MHz section and high-beta 650 MHz section are discussed. The beam extraction scheme at 1 GeV is discussed also. [1] S. Holmes, “Project X News, Strategy, Meeting Goals,” 2012 Fall Project X Collaboration Meeting, 27-28 November 2012, Fermilab.