FEL2014 - List of Authors (Hong, J.H.)

Paper

Title

Page

A Beam Test of Corrugated Structure for Passive Linearizer

593

H.-S. Kang, J.H. Hong
PAL, Pohang, Kyungbuk, Republic of Korea

A dechirper which is a vacuum chamber of two corrugated, metallic plates with adjustable gap was successfully tested at Pohang, in August 2013. Another beam test was carried out to test the same structure to see if the corrugated plates may work as a linearizer. The test result will be presented together with the simulation result.

WEB02

Beam Operation of the PAL-XFEL Injector Test Facility

615

J.H. Han, S.Y. Baek, M.S. Chae, H. J. Choi, T. Ha, J.H. Hong, J. Hu, W.H. Hwang, S.H. Jung, H.-S. Kang, C. Kim, C.H. Kim, I.Y. Kim, J.M. Kim, S.H. Kim, I.S. Ko, H.-S. Lee, J. Lee, S.J. Lee, W.W. Lee, C.-K. Min, G. Mun, D.H. Na, S.S. Park, S.J. Park, Y.J. Park, Y.G. Son, H. Yang
PAL, Pohang, Kyungbuk, Republic of Korea

The Pohang Accelerator Laboratory X-ray Free electron Laser (PAL-XFEL) project was launched in 2011. This project aims at the generation of X-ray FEL radiation in a range of 0.1 to 10 nm for photon users with a bunch repetition rate of 60 Hz. The machine consists of a 10 GeV normal conducting S-band linear accelerator and five undulator beamlines. The linac and two undulator beamlines will be constructed by the end of 2015 and first FEL radiation is expected in 2016. As a part of preparation for the project, an Injector Test Facility was constructed in 2012. Since December 2012, beam commissioning is being carried out to find optimum operating conditions and to test accelerator components including RF, laser, diagnostics, magnet, vacuum and control. We present the status of beam commissioning and components tests at the test facility.

Slides WEB02 [10.249 MB]

THP011

Beam Measurement of Photocathode RF-gun for PAL-XFEL

699

J.H. Hong, M.S. Chae, J.H. Han, H.-S. Kang, C.-K. Min, S.J. Park, Y.J. Park
PAL, Pohang, Kyungbuk, Republic of Korea
I.S. Ko
POSTECH, Pohang, Kyungbuk, Republic of Korea

The Injector Test Facility (ITF) at Pohang Accelerator Laboratory (PAL) was constructed to develop an injector for the PAL X-ray free-electron laser (PAL-XFEL) project. The PAL-XFEL design requires the injector to produce an electron beam with a slice emittance of 0.4 mm-mrad at the charge of 200 pC. A 4-hole type RF-gun has been successfully fabricated and tested at ITF. In this paper we report the recent beam-measurement results using the RF-gun at ITF. Emittance measurements have been carried out by changing laser and RF parameters.

THP013

Slice Emittance Measurement using RF Deflecting Cavity at PAL-XFEL ITF

707

J. Lee
POSTECH, Pohang, Kyungbuk, Republic of Korea
J.H. Han, J.H. Hong, I.S. Ko, S.J. Park
PAL, Pohang, Kyungbuk, Republic of Korea

One of key characteristic for operating PAL-XFEL is the time-dependent transverse properties of a bunch, slice emittance. To achieve the design FEL performance of PAL-XFEL a slice emittance of 0.4 mm mrad at 0.2 nC is required. An Injector Test Facility (ITF) was constructed to study beam properties. In addition to projected emittance measurement, slice emittance measurement is being done using a transverse RF deflecting cavity. We presents results of slice emittance measurement at ITF and future plan for the optimization of operating condition.

Paper	Title	Page
TUP093	A Beam Test of Corrugated Structure for Passive Linearizer	593
	H.-S. Kang, J.H. Hong PAL, Pohang, Kyungbuk, Republic of Korea
	A dechirper which is a vacuum chamber of two corrugated, metallic plates with adjustable gap was successfully tested at Pohang, in August 2013. Another beam test was carried out to test the same structure to see if the corrugated plates may work as a linearizer. The test result will be presented together with the simulation result.

WEB02	Beam Operation of the PAL-XFEL Injector Test Facility	615
	J.H. Han, S.Y. Baek, M.S. Chae, H. J. Choi, T. Ha, J.H. Hong, J. Hu, W.H. Hwang, S.H. Jung, H.-S. Kang, C. Kim, C.H. Kim, I.Y. Kim, J.M. Kim, S.H. Kim, I.S. Ko, H.-S. Lee, J. Lee, S.J. Lee, W.W. Lee, C.-K. Min, G. Mun, D.H. Na, S.S. Park, S.J. Park, Y.J. Park, Y.G. Son, H. Yang PAL, Pohang, Kyungbuk, Republic of Korea
	The Pohang Accelerator Laboratory X-ray Free electron Laser (PAL-XFEL) project was launched in 2011. This project aims at the generation of X-ray FEL radiation in a range of 0.1 to 10 nm for photon users with a bunch repetition rate of 60 Hz. The machine consists of a 10 GeV normal conducting S-band linear accelerator and five undulator beamlines. The linac and two undulator beamlines will be constructed by the end of 2015 and first FEL radiation is expected in 2016. As a part of preparation for the project, an Injector Test Facility was constructed in 2012. Since December 2012, beam commissioning is being carried out to find optimum operating conditions and to test accelerator components including RF, laser, diagnostics, magnet, vacuum and control. We present the status of beam commissioning and components tests at the test facility.
	Slides WEB02 [10.249 MB]

THP011	Beam Measurement of Photocathode RF-gun for PAL-XFEL	699
	J.H. Hong, M.S. Chae, J.H. Han, H.-S. Kang, C.-K. Min, S.J. Park, Y.J. Park PAL, Pohang, Kyungbuk, Republic of Korea I.S. Ko POSTECH, Pohang, Kyungbuk, Republic of Korea
	The Injector Test Facility (ITF) at Pohang Accelerator Laboratory (PAL) was constructed to develop an injector for the PAL X-ray free-electron laser (PAL-XFEL) project. The PAL-XFEL design requires the injector to produce an electron beam with a slice emittance of 0.4 mm-mrad at the charge of 200 pC. A 4-hole type RF-gun has been successfully fabricated and tested at ITF. In this paper we report the recent beam-measurement results using the RF-gun at ITF. Emittance measurements have been carried out by changing laser and RF parameters.

THP013	Slice Emittance Measurement using RF Deflecting Cavity at PAL-XFEL ITF	707
	J. Lee POSTECH, Pohang, Kyungbuk, Republic of Korea J.H. Han, J.H. Hong, I.S. Ko, S.J. Park PAL, Pohang, Kyungbuk, Republic of Korea
	One of key characteristic for operating PAL-XFEL is the time-dependent transverse properties of a bunch, slice emittance. To achieve the design FEL performance of PAL-XFEL a slice emittance of 0.4 mm mrad at 0.2 nC is required. An Injector Test Facility (ITF) was constructed to study beam properties. In addition to projected emittance measurement, slice emittance measurement is being done using a transverse RF deflecting cavity. We presents results of slice emittance measurement at ITF and future plan for the optimization of operating condition.