FEL2014 - List of Authors (Loehl, F.)

Paper

Title

Page

Status of the SwissFEL C-band Linac

322

F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach
PSI, Villigen PSI, Switzerland

The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.

Slides TUA04 [11.482 MB]

THB02

Experimental Results of Diagnostics Response for Longitudinal Phase Space

657

F. Frei, V.R. Arsov, H. Brands, R. Ischebeck, B. Kalantari, R. Kalt, B. Keil, W. Koprek, F. Löhl, G.L. Orlandi, Á. Saá Hernández, T. Schilcher, V. Schlott
PSI, Villigen PSI, Switzerland

At SwissFEL, electron bunches will be accelerated, shaped, and longitudinally compressed by different radio frequency (RF) structures (S-, C-, and X-band) in combination with magnetic chicanes. In order to meet the envisaged performance, it is planned to regulate the different RF parameters based on the signals from numerous electron beam diagnostics. Here we will present experimental results of the diagnostics response on RF phase and field amplitude variations that were obtained at the SwissFEL Injector Test Facility.

Slides THB02 [6.110 MB]

THP081

Beam Loss Monitors for the SwissFEL

C. Ozkan, M. Calvi, R. Ischebeck, D. Llorente Sancho, F. Löhl, G.L. Orlandi, P. Pollet, V. Schlott, T. Schmidt
PSI, Villigen PSI, Switzerland

There are currently three types of monitors planned for tracking and minimizing beam losses at the SwissFEL. Fiber-based loss monitors will provide information on the longitudinal loss location, help reduce losses at undulators and measure losses due to insertion of wire scanners for transverse beam profile measurements. They shall be integrated to the Machine Protection System due to their fast response capabilities. The dose deposited over time at the undulators shall be measured with RadFETs and readout using the DOSFET L-02 reader. Characterization of all three types of loss monitors have been carried out at the SwissFEL Injector Test Facility. This contribution shall provide in-depth description of the monitors along with their complete readout chain and results from the characterization studies.

THP091

Design and Test of Wire-Scanners for SwissFEL

948

G.L. Orlandi, M. Baldinger, H. Brands, P. Heimgartner, R. Ischebeck, A. Kammerer, F. Löhl, R. Lüscher, P. Mohanmurthy, C. Ozkan, B. Rippstein, V. Schlott, L. Schulz, C. Seiler, S. Trovati, P. Valitutti, D. Zimoch
PSI, Villigen PSI, Switzerland

The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.7 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be presented.

Paper	Title	Page
TUA04	Status of the SwissFEL C-band Linac	322
	F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach PSI, Villigen PSI, Switzerland
	The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.
	Slides TUA04 [11.482 MB]

THB02	Experimental Results of Diagnostics Response for Longitudinal Phase Space	657
	F. Frei, V.R. Arsov, H. Brands, R. Ischebeck, B. Kalantari, R. Kalt, B. Keil, W. Koprek, F. Löhl, G.L. Orlandi, Á. Saá Hernández, T. Schilcher, V. Schlott PSI, Villigen PSI, Switzerland
	At SwissFEL, electron bunches will be accelerated, shaped, and longitudinally compressed by different radio frequency (RF) structures (S-, C-, and X-band) in combination with magnetic chicanes. In order to meet the envisaged performance, it is planned to regulate the different RF parameters based on the signals from numerous electron beam diagnostics. Here we will present experimental results of the diagnostics response on RF phase and field amplitude variations that were obtained at the SwissFEL Injector Test Facility.
	Slides THB02 [6.110 MB]

THP081	Beam Loss Monitors for the SwissFEL
	C. Ozkan, M. Calvi, R. Ischebeck, D. Llorente Sancho, F. Löhl, G.L. Orlandi, P. Pollet, V. Schlott, T. Schmidt PSI, Villigen PSI, Switzerland
	There are currently three types of monitors planned for tracking and minimizing beam losses at the SwissFEL. Fiber-based loss monitors will provide information on the longitudinal loss location, help reduce losses at undulators and measure losses due to insertion of wire scanners for transverse beam profile measurements. They shall be integrated to the Machine Protection System due to their fast response capabilities. The dose deposited over time at the undulators shall be measured with RadFETs and readout using the DOSFET L-02 reader. Characterization of all three types of loss monitors have been carried out at the SwissFEL Injector Test Facility. This contribution shall provide in-depth description of the monitors along with their complete readout chain and results from the characterization studies.

THP091	Design and Test of Wire-Scanners for SwissFEL	948
	G.L. Orlandi, M. Baldinger, H. Brands, P. Heimgartner, R. Ischebeck, A. Kammerer, F. Löhl, R. Lüscher, P. Mohanmurthy, C. Ozkan, B. Rippstein, V. Schlott, L. Schulz, C. Seiler, S. Trovati, P. Valitutti, D. Zimoch PSI, Villigen PSI, Switzerland
	The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.7 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be presented.