IPAC2018 - List of Authors (Antipov, S. A.)

Paper	Title	Page
MOPMF053	Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2	228
	J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth CERN, Geneva, Switzerland D. Amorim Université Grenoble Alpes, Grenoble, France A.A. Gorzawski University of Manchester, Manchester, United Kingdom L. Mether EPFL, Lausanne, Switzerland
	Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF064	High-Energy LHC Design	269
	F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann CERN, Geneva, Switzerland J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt JAI, Oxford, United Kingdom A. Apyan ANSL, Yerevan, Armenia J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco EPFL, Lausanne, Switzerland F. Burkart DESY, Hamburg, Germany Y. Cai, Y.M. Nosochkov SLAC, Menlo Park, California, USA G. Guillermo Cantón CINVESTAV, Mérida, Mexico K. Ohmi, K. Oide, D. Zhou KEK, Ibaraki, Japan
	In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF069	The High Energy LHC Beam-Beam Effects studies	285
	T. Pieloni, J. Barranco García, L. Rivkin, C. Tambasco EPFL, Lausanne, Switzerland D. Amorim, S. A. Antipov, X. Buffat, B. Salvant, F. Zimmermann CERN, Geneva, Switzerland
	Funding: This work is supported by the Swiss State Secretariat for Education, Research and Innovation SERI. We present in this paper the studies of beam-beam effects for the High Energy Large Hadron Collider. We will describe and review the different aspects of beam-beam interactions (i.e. orbit effects, Landau damping, compensation schemes and operational set-up). An operational scenario for the collider will also be given as a result of the study.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYGBE4	Low-Impedance Collimators for HL-LHC	1794
	S. A. Antipov, N. Biancacci, R. Bruce, A. Mereghetti, D. Mirarchi, E. Métral, S. Redaelli, B. Salvant CERN, Geneva, Switzerland D. Amorim Université Grenoble Alpes, Grenoble, France
	The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) will double its beam intensity for the needs of High Energy Physics frontier. This increase requires a reduction of the machine's impedance to ensure the coherent stability of the beams until they are put in collision. A major part of the impedance is the resistive wall contribution of the collimators. To reduce this contribution several coating options have been proposed. We have studied numerically the effect of the novel coatings on the beam stability. The results show that a decrease of up to 30% of the machine impedance and a reduction of up to 120 A in the stabilizing octupole current threshold can be achieved by coating the secondary collimators with Molybdenum. Half of that improvement can be obtained by coating the jaws of a subset of four collimators identified as the highest contributors to machine impedance. The installation of this subset of low-impedance collimators is planned for the Long Shutdown 2 in 2019-2020.
	Slides WEYGBE4 [5.719 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEYGBE4
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF048	Destabilising Effect of the LHC Transverse Damper	3076
	E. Métral, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, K.S.B. Li CERN, Geneva, Switzerland
	Three questions motivated this study for the CERN Large Hadron Collider in terms of beam stability: (i) why a chromaticity close to zero seemed more critical than predicted during Run 1 (in 2011 and 2012) and during Run 2 (in 2015)?; (ii) why some past simulations with a chromaticity close to zero revealed a more critical situation with the transverse damper than without?; (iii) what should be the minimum operational chromaticity in the future in the LHC and High-Luminosity LHC? A new Vlasov solver (called GALACTIC) was developed to shed light on the destabilising mechanism of the transverse damper, which is a potential contributor to explain the LHC observation. Due to the features, which are discussed in this paper, the name 'ISR (for Imaginary tune Split and Repulsion) instability' is suggested for this new kind of single-bunch instability with zero chromaticity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF048
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF057	Instability Observations in the Large Hadron Collider During Run 2	3099
	L.R. Carver, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, G. Iadarola, K.S.B. Li, E.H. Maclean, L. Mether, E. Métral, B. Salvant, M. Schenk CERN, Geneva, Switzerland L. Mether, M. Schenk EPFL, Lausanne, Switzerland
	Instabilities of many different types and characteristics have been observed in the LHC during Run 2. The origin of these instabilities come from a variety of stabilising and destabilising mechanisms. Efforts to understand these instabilities and prevent their occurrence has improved the performance of the LHC in all stages of the machine cycle. This paper aims to give an overview into some of the instability observations and details the operational steps to prevent them.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF057
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF058	Experimental Characterisation of a Fast Instability Linked to Losses in the 16L2 Cryogenic Half-Cell in the CERN LHC	3103
	B. Salvant, S. A. Antipov, G. Arduini, N. Biancacci, X. Buffat, L.R. Carver, P. Collier, A.A. Gorzawski, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, D. Mirarchi, E. Métral, G. Rumolo, D. Valuch CERN, Geneva, Switzerland L. Mether EPFL, Lausanne, Switzerland
	The operation during the summer months of the 2017 Run of the CERN LHC was plagued with fast beam losses that repeatedly occurred in the 16th arc half-cell at the left of IP2 as well as in the collimation insertion, leading to unwanted beam dumps. Transverse coherent oscillations were observed during this fast process. We detail here the experimental observations of coherent motion that al-lowed shedding light upon parts of the mechanism and identify the potential mitigations that were successfully implemented in the second half of the Run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZGB6	APS/DPB Thesis Award Talk 2018: Sergey Antipov
	S. A. Antipov CERN, Geneva, Switzerland
	APS/DPB Thesis Award Talk 2018: Sergey Antipov
	Slides THZGB6 [1.706 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF035	Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC	3036
	S. A. Antipov University of Chicago, Chicago, Illinois, USA D. Amorim, N. Biancacci, L.R. Carver, G. Mazzacano, A. Mereghetti, E. Métral, S. Redaelli, B. Salvant, D. Valuch CERN, Geneva, Switzerland
	Several options of low resistivity coating have been proposed for the collimator upgrade of the Large Hadron Collider. In order to study their effect on the beam dynamics a special collimator has been built and installed in the machine. Its jaws are coated with three different materials and can be moved transversely to selectively expose the beam to the chosen coating. We have measured the resistive wall tune shifts of each coating material and compared them with that of a standard Carbon Fibre Composite (CFC) collimator jaw. A resolution of the tune shift of the order of 10^-5 has been achieved in the measurement. The results show a significant reduction of the resistive wall tune shift with novel materials. The largest improvement is obtained with a 5 μm Molybdenum coating of a Molybdenum-Graphite jaw. The observed tune shifts show a good agreement with the impedance model and the bench impedance and resistivity measurements. Obtained results can be used to further improve the precision of the impedance model.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2

228

J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth
CERN, Geneva, Switzerland
D. Amorim
Université Grenoble Alpes, Grenoble, France
A.A. Gorzawski
University of Manchester, Manchester, United Kingdom
L. Mether
EPFL, Lausanne, Switzerland

Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF064

High-Energy LHC Design

269

F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
CERN, Geneva, Switzerland
J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt
JAI, Oxford, United Kingdom
A. Apyan
ANSL, Yerevan, Armenia
J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
EPFL, Lausanne, Switzerland
F. Burkart
DESY, Hamburg, Germany
Y. Cai, Y.M. Nosochkov
SLAC, Menlo Park, California, USA
G. Guillermo Cantón
CINVESTAV, Mérida, Mexico
K. Ohmi, K. Oide, D. Zhou
KEK, Ibaraki, Japan

In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF069

The High Energy LHC Beam-Beam Effects studies

285

T. Pieloni, J. Barranco García, L. Rivkin, C. Tambasco
EPFL, Lausanne, Switzerland
D. Amorim, S. A. Antipov, X. Buffat, B. Salvant, F. Zimmermann
CERN, Geneva, Switzerland

Funding: This work is supported by the Swiss State Secretariat for Education, Research and Innovation SERI.
We present in this paper the studies of beam-beam effects for the High Energy Large Hadron Collider. We will describe and review the different aspects of beam-beam interactions (i.e. orbit effects, Landau damping, compensation schemes and operational set-up). An operational scenario for the collider will also be given as a result of the study.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYGBE4

Low-Impedance Collimators for HL-LHC

1794

S. A. Antipov, N. Biancacci, R. Bruce, A. Mereghetti, D. Mirarchi, E. Métral, S. Redaelli, B. Salvant
CERN, Geneva, Switzerland
D. Amorim
Université Grenoble Alpes, Grenoble, France

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) will double its beam intensity for the needs of High Energy Physics frontier. This increase requires a reduction of the machine's impedance to ensure the coherent stability of the beams until they are put in collision. A major part of the impedance is the resistive wall contribution of the collimators. To reduce this contribution several coating options have been proposed. We have studied numerically the effect of the novel coatings on the beam stability. The results show that a decrease of up to 30% of the machine impedance and a reduction of up to 120 A in the stabilizing octupole current threshold can be achieved by coating the secondary collimators with Molybdenum. Half of that improvement can be obtained by coating the jaws of a subset of four collimators identified as the highest contributors to machine impedance. The installation of this subset of low-impedance collimators is planned for the Long Shutdown 2 in 2019-2020.

Slides WEYGBE4 [5.719 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEYGBE4

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF048

Destabilising Effect of the LHC Transverse Damper

3076

E. Métral, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, K.S.B. Li
CERN, Geneva, Switzerland

Three questions motivated this study for the CERN Large Hadron Collider in terms of beam stability: (i) why a chromaticity close to zero seemed more critical than predicted during Run 1 (in 2011 and 2012) and during Run 2 (in 2015)?; (ii) why some past simulations with a chromaticity close to zero revealed a more critical situation with the transverse damper than without?; (iii) what should be the minimum operational chromaticity in the future in the LHC and High-Luminosity LHC? A new Vlasov solver (called GALACTIC) was developed to shed light on the destabilising mechanism of the transverse damper, which is a potential contributor to explain the LHC observation. Due to the features, which are discussed in this paper, the name 'ISR (for Imaginary tune Split and Repulsion) instability' is suggested for this new kind of single-bunch instability with zero chromaticity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF048

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF057

Instability Observations in the Large Hadron Collider During Run 2

3099

L.R. Carver, D. Amorim, S. A. Antipov, N. Biancacci, X. Buffat, G. Iadarola, K.S.B. Li, E.H. Maclean, L. Mether, E. Métral, B. Salvant, M. Schenk
CERN, Geneva, Switzerland
L. Mether, M. Schenk
EPFL, Lausanne, Switzerland

Instabilities of many different types and characteristics have been observed in the LHC during Run 2. The origin of these instabilities come from a variety of stabilising and destabilising mechanisms. Efforts to understand these instabilities and prevent their occurrence has improved the performance of the LHC in all stages of the machine cycle. This paper aims to give an overview into some of the instability observations and details the operational steps to prevent them.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF057

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF058

Experimental Characterisation of a Fast Instability Linked to Losses in the 16L2 Cryogenic Half-Cell in the CERN LHC

3103

B. Salvant, S. A. Antipov, G. Arduini, N. Biancacci, X. Buffat, L.R. Carver, P. Collier, A.A. Gorzawski, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, D. Mirarchi, E. Métral, G. Rumolo, D. Valuch
CERN, Geneva, Switzerland
L. Mether
EPFL, Lausanne, Switzerland

The operation during the summer months of the 2017 Run of the CERN LHC was plagued with fast beam losses that repeatedly occurred in the 16th arc half-cell at the left of IP2 as well as in the collimation insertion, leading to unwanted beam dumps. Transverse coherent oscillations were observed during this fast process. We detail here the experimental observations of coherent motion that al-lowed shedding light upon parts of the mechanism and identify the potential mitigations that were successfully implemented in the second half of the Run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZGB6

APS/DPB Thesis Award Talk 2018: Sergey Antipov

S. A. Antipov
CERN, Geneva, Switzerland

APS/DPB Thesis Award Talk 2018: Sergey Antipov

Slides THZGB6 [1.706 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF035

Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC

3036

S. A. Antipov
University of Chicago, Chicago, Illinois, USA
D. Amorim, N. Biancacci, L.R. Carver, G. Mazzacano, A. Mereghetti, E. Métral, S. Redaelli, B. Salvant, D. Valuch
CERN, Geneva, Switzerland

Several options of low resistivity coating have been proposed for the collimator upgrade of the Large Hadron Collider. In order to study their effect on the beam dynamics a special collimator has been built and installed in the machine. Its jaws are coated with three different materials and can be moved transversely to selectively expose the beam to the chosen coating. We have measured the resistive wall tune shifts of each coating material and compared them with that of a standard Carbon Fibre Composite (CFC) collimator jaw. A resolution of the tune shift of the order of 10^-5 has been achieved in the measurement. The results show a significant reduction of the resistive wall tune shift with novel materials. The largest improvement is obtained with a 5 μm Molybdenum coating of a Molybdenum-Graphite jaw. The observed tune shifts show a good agreement with the impedance model and the bench impedance and resistivity measurements. Obtained results can be used to further improve the precision of the impedance model.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)