IBIC2019 - List of Keywords (software)

Paper	Title	Other Keywords	Page
MOCO01	Online Touschek Beam Lifetime Measurement Based on the Precise Bunch-By-Bunch Beam Charge Monitor	SRF, storage-ring, injection, electron	36
	B. Gao, F.Z. Chen, Y.B. Leng SSRF, Shanghai, People’s Republic of China Y.M. Zhou SINAP, Shanghai, People’s Republic of China
	Beam current and lifetime are the most important parameters to characterize the beam and machine quality of an electron storage ring. In order to describe the behavior of all electron bunches completely and accurately, a precisely bunch-by-bunch charge monitor has been developed at SSRF. Method called two-point equilibrium sampling is introduced to avoid the influence of longitudinal oscillation on the sampling point, thanks to this, the resolution of the BCM was below 0.2 pC. Utilizing the advantages of BCM’s high refresh rate and high resolution, the system can meet the requirement of monitor the bunch-by-bunch beam lifetime, measure touschek lifetime and vacuum lifetime. In this paper, experiments and and analysis will be described in detail.
	Slides MOCO01 [18.156 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOCO01
About •	paper received ※ 03 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP015	Wire Scanner Diagnostic System	controls, diagnostics, ion-source, hardware	326
	S. Grulja, S. Cleva, R. De Monte, M. Ferianis Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Elettra Sincrotrone Trieste Research Center (Elettra) is one of the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. One part of the Elettra in-kind contributions to the proton accelerator is the construction of acquisition system for ESS Wire Scanner (WS).This paper presents an overview of the diagnostic system of the ESS Wire Scanner, including the first measurements with beam performed at CERN on LINAC4.
	Poster TUPP015 [7.121 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP015
About •	paper received ※ 04 September 2019 paper accepted ※ 07 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THAO03	ROSE - a Rotating 4D Emittance Scanner	emittance, MMI, quadrupole, electronics	669
	M.T. Maier, L. Groening, C. Xiao GSI, Darmstadt, Germany A. Bechtold NTG, Gelnhausen, Germany J.M. Maus NTG Neue Technologien GmbH & Co KG, Gelnhausen, Germany
	The detector system ROSE, allowing to perform 4D emittance measurements on heavy ion beams independent of their energy and time structure, has been built and successfully commissioned in 2016 at GSI in Darmstadt, Germany. This method to measure the four dimensional emittance has then been granted a patent in 2017. The inventors together with the technology transfer department of GSI have found an industrial partner to modify ROSE into a fully standalone, mobile emittance scanner system. This is a three step process involving the ROSE hardware, the electronics ROBOMAT and the software working packages. The electronics was commissioned at the ECR test bench of the Heidelberg ion therapy facility HIT in June 2019. Currently our main focus is on the development of the 4D software package ROSOFT. This contribution presents the actual status and introduces the multiple possibilities of this 4D emittance scanner.
	Slides THAO03 [26.411 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-THAO03
About •	paper received ※ 03 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOCO01

Online Touschek Beam Lifetime Measurement Based on the Precise Bunch-By-Bunch Beam Charge Monitor

SRF, storage-ring, injection, electron

36

B. Gao, F.Z. Chen, Y.B. Leng
SSRF, Shanghai, People’s Republic of China
Y.M. Zhou
SINAP, Shanghai, People’s Republic of China

Beam current and lifetime are the most important parameters to characterize the beam and machine quality of an electron storage ring. In order to describe the behavior of all electron bunches completely and accurately, a precisely bunch-by-bunch charge monitor has been developed at SSRF. Method called two-point equilibrium sampling is introduced to avoid the influence of longitudinal oscillation on the sampling point, thanks to this, the resolution of the BCM was below 0.2 pC. Utilizing the advantages of BCM’s high refresh rate and high resolution, the system can meet the requirement of monitor the bunch-by-bunch beam lifetime, measure touschek lifetime and vacuum lifetime. In this paper, experiments and and analysis will be described in detail.

Slides MOCO01 [18.156 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOCO01

About •

paper received ※ 03 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP015

Wire Scanner Diagnostic System

controls, diagnostics, ion-source, hardware

326

S. Grulja, S. Cleva, R. De Monte, M. Ferianis
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Elettra Sincrotrone Trieste Research Center (Elettra) is one of the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. One part of the Elettra in-kind contributions to the proton accelerator is the construction of acquisition system for ESS Wire Scanner (WS).This paper presents an overview of the diagnostic system of the ESS Wire Scanner, including the first measurements with beam performed at CERN on LINAC4.

Poster TUPP015 [7.121 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP015

About •

paper received ※ 04 September 2019 paper accepted ※ 07 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THAO03

ROSE - a Rotating 4D Emittance Scanner

emittance, MMI, quadrupole, electronics

669

M.T. Maier, L. Groening, C. Xiao
GSI, Darmstadt, Germany
A. Bechtold
NTG, Gelnhausen, Germany
J.M. Maus
NTG Neue Technologien GmbH & Co KG, Gelnhausen, Germany

The detector system ROSE, allowing to perform 4D emittance measurements on heavy ion beams independent of their energy and time structure, has been built and successfully commissioned in 2016 at GSI in Darmstadt, Germany. This method to measure the four dimensional emittance has then been granted a patent in 2017. The inventors together with the technology transfer department of GSI have found an industrial partner to modify ROSE into a fully standalone, mobile emittance scanner system. This is a three step process involving the ROSE hardware, the electronics ROBOMAT and the software working packages. The electronics was commissioned at the ECR test bench of the Heidelberg ion therapy facility HIT in June 2019. Currently our main focus is on the development of the 4D software package ROSOFT. This contribution presents the actual status and introduces the multiple possibilities of this 4D emittance scanner.

Slides THAO03 [26.411 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-THAO03

About •

paper received ※ 03 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)