SRF2021 - List of Authors (Yamanaka, M.)

Paper	Title	Page
MOPCAV004	Mechanical Properties of Directly Sliced Medium Grain Niobium for 1.3 GHz SRF Cavity	259
	A. Kumar, K. Abe, T. Dohmae, S. Michizono, T. Saeki, Y. Watanabe, A. Yamamoto, M. Yamanaka KEK, Ibaraki, Japan A. Fajardo, N. Lannoy ATI, Albany, Oregon, USA G.R. Myneni JLab, Newport News, Virginia, USA G.R. Myneni BSCE, Yorktown, Virginia, USA
	At KEK, research is being conducted to manufacture cost-effective 1.3 GHz superconducting radio frequency cavities based on the fine grain (FG) and large grain (LG) Niobium (Nb) materials. Medium grain (MG) Nb has been proposed and developed as an alternative to the FG and LG Nb, being expected to have better mechanical stability with a cost-effective and clean manufacturing approach. MG Nb has an average grain size of 200 - 300 µm, which is approximately 100 times smaller than the LG Nb, however, there are occasional grains as large as 1-2 mm. As such, it is expected to have isotropic properties rather than the anisotropic properties of LG Nb. In this paper, we will outline the mechanical properties of the directly sliced high RRR MG Nb material (manufactured by ATI), and a comparative study will be presented with respect to FG and LG Nb. Moreover, the viability of MG Nb for the global high-pressure regulation for 1.3 GHz SRF cavity will be presented.
	Poster MOPCAV004 [1.796 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV004
About •	Received ※ 21 June 2021 — Revised ※ 11 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 25 March 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPCAV012	Fabrication of 1.3 GHz SRF Cavities Using Medium Grain Niobium Discs Directly Sliced from Forged Ingot	287
	T. Dohmae, K. Abe, H. Inoue, A. Kumar, S. Michizono, T. Saeki, K. Umemori, Y. Watanabe, A. Yamamoto, M. Yamanaka, K. Yoshida KEK, Ibaraki, Japan A. Fajardo, N. Lannoy ATI, Albany, Oregon, USA G.R. Myneni JLab, Newport News, USA
	Medium grain (MG) niobium disc which is directly sliced from forged ingot is newly investigated for the cavity material. An effective cost reduction can be achieved using MG niobium since rolling process which is necessary for typical niobium sheet can be skipped during MG niobium production. Grain size of MD niobium is 200-300 um which is much smaller than large grain (LG) niobium directly sliced from melted niobium ingot. Hence, the formability of MG niobium is expected to be much better than LG niobium. KEK has started fabrication of cavity using MG niobium. In this talk, characteristic of MG niobium during fabrication will be reported.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV012
About •	Received ※ 20 June 2021 — Revised ※ 12 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 17 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPFDV005	Tensile Tests of Large Grain Ingot Niobium at Liquid Helium Temperature	562
	M. Yamanaka KEK, Ibaraki, Japan K. Enami Tsukuba University, Ibaraki, Japan
	Tensile tests at liquid He temperature were performed using specimen taken from high purity large grain niobium ingot produced by CBMM. The measured RRR is 242. The ingot is 260 mm in diameter and sliced by a multi wire saw to 2.8 thickness. 5 specimens were cut off from one sliced disk. 3 disks were set in same phase to obtain same grain distribution. 3 specimens each of 5 grain patterns 5, 15 in total were used for the tensile test. The tensile test stand using a cryostat and liquid He was manufactured by ourselves. The measured tensile strength varied 379 to 808 MPa. The average value is 611 MPa. The tensile strength at room temperature is 84 MPa. The strength becomes high at low temperature like a fine grain niobium. The specimen includes a grain boundary, and causes the variation of strength. The different result was obtained in same grain patterns. The relationship between crystal orientation and strength is discussed.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPFDV005
About •	Received ※ 08 June 2021 — Accepted ※ 12 September 2021 — Issue date ※ 02 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Mechanical Properties of Directly Sliced Medium Grain Niobium for 1.3 GHz SRF Cavity

259

A. Kumar, K. Abe, T. Dohmae, S. Michizono, T. Saeki, Y. Watanabe, A. Yamamoto, M. Yamanaka
KEK, Ibaraki, Japan
A. Fajardo, N. Lannoy
ATI, Albany, Oregon, USA
G.R. Myneni
JLab, Newport News, Virginia, USA
G.R. Myneni
BSCE, Yorktown, Virginia, USA

At KEK, research is being conducted to manufacture cost-effective 1.3 GHz superconducting radio frequency cavities based on the fine grain (FG) and large grain (LG) Niobium (Nb) materials. Medium grain (MG) Nb has been proposed and developed as an alternative to the FG and LG Nb, being expected to have better mechanical stability with a cost-effective and clean manufacturing approach. MG Nb has an average grain size of 200 - 300 µm, which is approximately 100 times smaller than the LG Nb, however, there are occasional grains as large as 1-2 mm. As such, it is expected to have isotropic properties rather than the anisotropic properties of LG Nb. In this paper, we will outline the mechanical properties of the directly sliced high RRR MG Nb material (manufactured by ATI), and a comparative study will be presented with respect to FG and LG Nb. Moreover, the viability of MG Nb for the global high-pressure regulation for 1.3 GHz SRF cavity will be presented.

Poster MOPCAV004 [1.796 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV004

About •

Received ※ 21 June 2021 — Revised ※ 11 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 25 March 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPCAV012

Fabrication of 1.3 GHz SRF Cavities Using Medium Grain Niobium Discs Directly Sliced from Forged Ingot

287

T. Dohmae, K. Abe, H. Inoue, A. Kumar, S. Michizono, T. Saeki, K. Umemori, Y. Watanabe, A. Yamamoto, M. Yamanaka, K. Yoshida
KEK, Ibaraki, Japan
A. Fajardo, N. Lannoy
ATI, Albany, Oregon, USA
G.R. Myneni
JLab, Newport News, USA

Medium grain (MG) niobium disc which is directly sliced from forged ingot is newly investigated for the cavity material. An effective cost reduction can be achieved using MG niobium since rolling process which is necessary for typical niobium sheet can be skipped during MG niobium production. Grain size of MD niobium is 200-300 um which is much smaller than large grain (LG) niobium directly sliced from melted niobium ingot. Hence, the formability of MG niobium is expected to be much better than LG niobium. KEK has started fabrication of cavity using MG niobium. In this talk, characteristic of MG niobium during fabrication will be reported.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPCAV012

About •

Received ※ 20 June 2021 — Revised ※ 12 July 2021 — Accepted ※ 21 August 2021 — Issue date ※ 17 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPFDV005

Tensile Tests of Large Grain Ingot Niobium at Liquid Helium Temperature

562

M. Yamanaka
KEK, Ibaraki, Japan
K. Enami
Tsukuba University, Ibaraki, Japan

Tensile tests at liquid He temperature were performed using specimen taken from high purity large grain niobium ingot produced by CBMM. The measured RRR is 242. The ingot is 260 mm in diameter and sliced by a multi wire saw to 2.8 thickness. 5 specimens were cut off from one sliced disk. 3 disks were set in same phase to obtain same grain distribution. 3 specimens each of 5 grain patterns 5, 15 in total were used for the tensile test. The tensile test stand using a cryostat and liquid He was manufactured by ourselves. The measured tensile strength varied 379 to 808 MPa. The average value is 611 MPa. The tensile strength at room temperature is 84 MPa. The strength becomes high at low temperature like a fine grain niobium. The specimen includes a grain boundary, and causes the variation of strength. The different result was obtained in same grain patterns. The relationship between crystal orientation and strength is discussed.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPFDV005

About •

Received ※ 08 June 2021 — Accepted ※ 12 September 2021 — Issue date ※ 02 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)