SRF2021 - List of Authors (Eremeev, G.V.)

Paper	Title	Page
SUPCAV018	First N-Doping and Mid-T Baking of Medium-ß 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University’s Facility for Rare Isotope Beams	53
	K.E. McGee, S.H. Kim, P.N. Ostroumov, A. Taylor FRIB, East Lansing, Michigan, USA G.V. Eremeev, M. Martinello, A.V. Netepenko Fermilab, Batavia, Illinois, USA M.P. Kelly, T. Reid ANL, Lemont, Illinois, USA
	Funding: Work supported by the 2020 US DoE, Office of Science Graduate Student Research award (SCGSR), and US DoE, Office of Science, High Energy Physics under Cooperative Agreement award number DE-SC0018362 Two hadron linacs currently under development in the US, the PIP-II linac at Fermi National Accelerator Laboratory (FNAL) and the upgrade for Michigan State University’s Facility For Rare Isotope Beams (FRIB), will employ 650 and 644 MHz ß-0.6 elliptical superconducting cavities respectively to meet their design energy requirements. The desired CW operation modes of these two linacs sets Q-factor requirements well above any previously achieved for cavities at this operating frequency and velocity, driving the need to explore new high-Q treatments. The N-doping technique developed at FNAL and employed at an industrial scale to the LCLS-II cryomodules is a strong candidate for high-Q treatments, but work is needed to refine the treatment to the lower operating frequency and velocity regime. We present the first results of the first N-doping tests and a "mid-T" bake test in the FRIB 644 MHz 5-cell elliptical cavities.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV018
About •	Received ※ 23 June 2021 — Revised ※ 16 November 2021 — Accepted ※ 08 May 2022 — Issue date ※ 08 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPTEV011	Nb₃Sn Coating of Twin Axis Cavity for SRF Applications	146
	J.K. Tiskumara, J.R. Delayen ODU, Norfolk, Virginia, USA G.V. Eremeev Fermilab, Batavia, Illinois, USA U. Pudasaini, C.E. Reece JLab, Newport News, Virginia, USA
	The twin axis cavity with two identical accelerating beams has been proposed for energy recovery linac (ERL) applications. Nb₃Sn is a superconducting material with a higher critical temperature and a higher critical field as compared to Nb, which promises a lower operating cost due to higher quality factors. Two niobium twin axis cavities were fabricated at JLab and were proposed to be coated with Nb₃Sn. Due to their more complex geometry, the typical coating process used for basic elliptical cavi-ties needs to be improved to coat these cavities. This development advances the current coating system at JLab for coating complex cavities. Two twin axis cavities were coated recently for the first time. This contribution dis-cusses initial results from coating of twin axis cavities, RF testing and witness sample analysis with an overview of the current challenges towards high performance Nb₃Sn coated twin axis cavities.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV011
About •	Received ※ 22 June 2021 — Revised ※ 19 December 2021 — Accepted ※ 21 February 2022 — Issue date ※ 01 April 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPTEV013	Validation of the 650 MHz SRF Cavity Tuner for PIP-II at 2 K	151
	C. Contreras-Martinez FRIB, East Lansing, Michigan, USA S.K. Chandrasekaran, S. Cheban, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, Y.M. Pischalnikov, O.V. Prokofiev, A.I. Sukhanov, J.C. Yun Fermilab, Batavia, Illinois, USA
	The PIP-II linac will include thirty-six β=0.61 and twenty-four β=0.92 650 MHz 5 cell elliptical SRF cavities. Each cavity will be equipped with a tuning system consisting of a double lever slow tuner for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. One dressed cavity equipped with an SRF tuner has been tested in the horizontal test stand at Fermilab. Results of testing the cavity-tuner system will be presented.
	Poster SUPTEV013 [0.835 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV013
About •	Received ※ 22 June 2021 — Revised ※ 13 August 2021 — Accepted ※ 26 February 2022 — Issue date ※ 02 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV005	Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project	448
	M. Martinello, D.J. Bice, C. Boffo, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, K.E. McGee, A.V. Netepenko, J.P. Ozelis, A.I. Sukhanov, G. Wu Fermilab, Batavia, Illinois, USA M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava RRCAT, Indore (M.P.), India M. Bertucci, A. Bosotti, C. Pagani, R. Paparella INFN/LASA, Segrate (MI), Italy P. Bhattacharyya, S. Ghosh, S. Ghosh, A. Mandal, S. Seth, S. Som VECC, Kolkata, India M.P. Kelly, T. Reid ANL, Lemont, Illinois, USA S.H. Kim, K.E. McGee, P.N. Ostroumov FRIB, East Lansing, Michigan, USA K.K. Mistri, P.N. Prakash IUAC, New Delhi, India
	High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV005
About •	Received ※ 01 July 2021 — Accepted ※ 02 November 2021 — Issue date ※ 16 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV013	STC Qualification Tests of PIP-II HB650 Cavities	465
	A.I. Sukhanov, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, S. Kazakov, T.N. Khabiboulline, T.H. Nicol, Y.M. Pischalnikov, O.V. Prokofiev, V. Roger, G. Wu, V.P. Yakovlev, J.C. Yun Fermilab, Batavia, Illinois, USA C. Contreras-Martinez FRIB, East Lansing, Michigan, USA
	Design of the high beta 650 MHz prototype cryomodule for PIP-II is currently undergoing at Fermilab. The cryomodule includes six 5-cell elliptical SRF cavities with accelerating voltage up to 20 MV and low heat dissipation (Q₀ > 3.3 · 10^zEhNZeHn). Characterization of performance of fully integrated jacketed cavities with high power coupler and tuner is crucial for the project. Such a characterization of jacketed cavity requires a horizontal test cryostat. The Fermilab Spoke Test Cryostat (STC) has been upgraded to accommodate testing of 650 MHz cavities. Commissioning of upgraded STC has been reported at SRF’19 conference. In this paper we present results of testing of the prototype HB650 cavity in upgraded STC facility. We characterize cavity performance and qualify it for the prototype HB650 cryomodule assembly.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV013
About •	Received ※ 21 June 2021 — Accepted ※ 21 August 2021 — Issue date ※ 04 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTEV015	Cylindrical Magnetron Development for Nb3sn Deposition via Magnetron Sputtering	868
	Md.N. Sayeed, H. Elsayed-Ali ODU, Norfolk, Virginia, USA C. Côté, M.A. Farzad, A. Sarkissian PLASMIONIQUE Inc., Varennes, Québec, Canada G.V. Eremeev Fermilab, Batavia, Illinois, USA A-M. Valente-Feliciano JLab, Newport News, Virginia, USA
	Funding: This work was supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under Contract No. DE-AC05-06OR23177. Due to its better superconducting properties (critical temperature Tc~ 18.3 K, superheating field Hsh~ 400 mT), Nb₃Sn is considered as a potential alternative to niobium (Tc~ 9.25 K, Hsh~ 200 mT) for superconducting radiofrequency (SRF) cavities for particle acceleration. Magnetron sputtering is an effective method to produce superconducting Nb₃Sn films. We deposited superconducting Nb₃Sn films on samples with magnetron sputtering using co-sputtering, sequential sputtering, and sputtering from a stoichiometric target. Nb₃Sn films produced by magnetron sputtering in our previous experiments have achieved DC superconducting critical temperature up to 17.93 K and RF superconducting transition at 17.2 K. A magnetron sputtering system with two identical cylindrical cathodes that can be used to sputter Nb₃Sn films on cavities has been designed and is under development now. We report on the design and the current progress on the development of the system.
	Poster THPTEV015 [1.131 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPTEV015
About •	Received ※ 22 June 2021 — Revised ※ 12 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 27 September 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

First N-Doping and Mid-T Baking of Medium-ß 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University’s Facility for Rare Isotope Beams

53

K.E. McGee, S.H. Kim, P.N. Ostroumov, A. Taylor
FRIB, East Lansing, Michigan, USA
G.V. Eremeev, M. Martinello, A.V. Netepenko
Fermilab, Batavia, Illinois, USA
M.P. Kelly, T. Reid
ANL, Lemont, Illinois, USA

Funding: Work supported by the 2020 US DoE, Office of Science Graduate Student Research award (SCGSR), and US DoE, Office of Science, High Energy Physics under Cooperative Agreement award number DE-SC0018362
Two hadron linacs currently under development in the US, the PIP-II linac at Fermi National Accelerator Laboratory (FNAL) and the upgrade for Michigan State University’s Facility For Rare Isotope Beams (FRIB), will employ 650 and 644 MHz ß-0.6 elliptical superconducting cavities respectively to meet their design energy requirements. The desired CW operation modes of these two linacs sets Q-factor requirements well above any previously achieved for cavities at this operating frequency and velocity, driving the need to explore new high-Q treatments. The N-doping technique developed at FNAL and employed at an industrial scale to the LCLS-II cryomodules is a strong candidate for high-Q treatments, but work is needed to refine the treatment to the lower operating frequency and velocity regime. We present the first results of the first N-doping tests and a "mid-T" bake test in the FRIB 644 MHz 5-cell elliptical cavities.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPCAV018

About •

Received ※ 23 June 2021 — Revised ※ 16 November 2021 — Accepted ※ 08 May 2022 — Issue date ※ 08 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPTEV011

Nb₃Sn Coating of Twin Axis Cavity for SRF Applications

146

J.K. Tiskumara, J.R. Delayen
ODU, Norfolk, Virginia, USA
G.V. Eremeev
Fermilab, Batavia, Illinois, USA
U. Pudasaini, C.E. Reece
JLab, Newport News, Virginia, USA

The twin axis cavity with two identical accelerating beams has been proposed for energy recovery linac (ERL) applications. Nb₃Sn is a superconducting material with a higher critical temperature and a higher critical field as compared to Nb, which promises a lower operating cost due to higher quality factors. Two niobium twin axis cavities were fabricated at JLab and were proposed to be coated with Nb₃Sn. Due to their more complex geometry, the typical coating process used for basic elliptical cavi-ties needs to be improved to coat these cavities. This development advances the current coating system at JLab for coating complex cavities. Two twin axis cavities were coated recently for the first time. This contribution dis-cusses initial results from coating of twin axis cavities, RF testing and witness sample analysis with an overview of the current challenges towards high performance Nb₃Sn coated twin axis cavities.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV011

About •

Received ※ 22 June 2021 — Revised ※ 19 December 2021 — Accepted ※ 21 February 2022 — Issue date ※ 01 April 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

SUPTEV013

Validation of the 650 MHz SRF Cavity Tuner for PIP-II at 2 K

151

C. Contreras-Martinez
FRIB, East Lansing, Michigan, USA
S.K. Chandrasekaran, S. Cheban, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, Y.M. Pischalnikov, O.V. Prokofiev, A.I. Sukhanov, J.C. Yun
Fermilab, Batavia, Illinois, USA

The PIP-II linac will include thirty-six β=0.61 and twenty-four β=0.92 650 MHz 5 cell elliptical SRF cavities. Each cavity will be equipped with a tuning system consisting of a double lever slow tuner for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. One dressed cavity equipped with an SRF tuner has been tested in the horizontal test stand at Fermilab. Results of testing the cavity-tuner system will be presented.

Poster SUPTEV013 [0.835 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-SUPTEV013

About •

Received ※ 22 June 2021 — Revised ※ 13 August 2021 — Accepted ※ 26 February 2022 — Issue date ※ 02 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV005

Toward Qualifications of HB and LB 650 MHz Cavities for the Prototype Cryomodules for the PIP-II Project

448

M. Martinello, D.J. Bice, C. Boffo, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, T.N. Khabiboulline, K.E. McGee, A.V. Netepenko, J.P. Ozelis, A.I. Sukhanov, G. Wu
Fermilab, Batavia, Illinois, USA
M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava
RRCAT, Indore (M.P.), India
M. Bertucci, A. Bosotti, C. Pagani, R. Paparella
INFN/LASA, Segrate (MI), Italy
P. Bhattacharyya, S. Ghosh, S. Ghosh, A. Mandal, S. Seth, S. Som
VECC, Kolkata, India
M.P. Kelly, T. Reid
ANL, Lemont, Illinois, USA
S.H. Kim, K.E. McGee, P.N. Ostroumov
FRIB, East Lansing, Michigan, USA
K.K. Mistri, P.N. Prakash
IUAC, New Delhi, India

High-beta (HB) and low-beta (LB) 650 MHz cryomodules are key components of the Proton Improvement Plan II (PIP-II) project. In this contribution we present the results of several 5-cell HB650 cavities that have been processed and tested with the purpose of qualifying them for the prototype cryomodule assembly, which will take place later this year. We also present the first results obtained in LB650 single-cell cavities process optimization. Taking advantage of their very similar geometry, we are also analyzing the effect of different surface treatments in FRIB’s 5-cell medium-beta 644MHz cavities. Cavities processed with N-doping and mid-T baking showed very promising results in term of both Q-factors and accelerating gradient for these low-beta structures.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV005

About •

Received ※ 01 July 2021 — Accepted ※ 02 November 2021 — Issue date ※ 16 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPCAV013

STC Qualification Tests of PIP-II HB650 Cavities

465

A.I. Sukhanov, S.K. Chandrasekaran, G.V. Eremeev, F. Furuta, S. Kazakov, T.N. Khabiboulline, T.H. Nicol, Y.M. Pischalnikov, O.V. Prokofiev, V. Roger, G. Wu, V.P. Yakovlev, J.C. Yun
Fermilab, Batavia, Illinois, USA
C. Contreras-Martinez
FRIB, East Lansing, Michigan, USA

Design of the high beta 650 MHz prototype cryomodule for PIP-II is currently undergoing at Fermilab. The cryomodule includes six 5-cell elliptical SRF cavities with accelerating voltage up to 20 MV and low heat dissipation (Q₀ > 3.3 · 10^zEhNZeHn). Characterization of performance of fully integrated jacketed cavities with high power coupler and tuner is crucial for the project. Such a characterization of jacketed cavity requires a horizontal test cryostat. The Fermilab Spoke Test Cryostat (STC) has been upgraded to accommodate testing of 650 MHz cavities. Commissioning of upgraded STC has been reported at SRF’19 conference. In this paper we present results of testing of the prototype HB650 cavity in upgraded STC facility. We characterize cavity performance and qualify it for the prototype HB650 cryomodule assembly.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-TUPCAV013

About •

Received ※ 21 June 2021 — Accepted ※ 21 August 2021 — Issue date ※ 04 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPTEV015

Cylindrical Magnetron Development for Nb3sn Deposition via Magnetron Sputtering

868

Md.N. Sayeed, H. Elsayed-Ali
ODU, Norfolk, Virginia, USA
C. Côté, M.A. Farzad, A. Sarkissian
PLASMIONIQUE Inc., Varennes, Québec, Canada
G.V. Eremeev
Fermilab, Batavia, Illinois, USA
A-M. Valente-Feliciano
JLab, Newport News, Virginia, USA

Funding: This work was supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under Contract No. DE-AC05-06OR23177.
Due to its better superconducting properties (critical temperature Tc~ 18.3 K, superheating field Hsh~ 400 mT), Nb₃Sn is considered as a potential alternative to niobium (Tc~ 9.25 K, Hsh~ 200 mT) for superconducting radiofrequency (SRF) cavities for particle acceleration. Magnetron sputtering is an effective method to produce superconducting Nb₃Sn films. We deposited superconducting Nb₃Sn films on samples with magnetron sputtering using co-sputtering, sequential sputtering, and sputtering from a stoichiometric target. Nb₃Sn films produced by magnetron sputtering in our previous experiments have achieved DC superconducting critical temperature up to 17.93 K and RF superconducting transition at 17.2 K. A magnetron sputtering system with two identical cylindrical cathodes that can be used to sputter Nb₃Sn films on cavities has been designed and is under development now. We report on the design and the current progress on the development of the system.

Poster THPTEV015 [1.131 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPTEV015

About •

Received ※ 22 June 2021 — Revised ※ 12 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 27 September 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)