SRF2021 - List of Authors (Duerr, V.)

Paper	Title	Page
MOPTEV013	The VSR Demo Module Design – A Spaceframe-Based Module for Cavities with Warm Waveguide HOM Absorbers	233
	F. Glöckner, D. Böhlick, M. Bürger, V. Dürr, A. Frahm, J. Knobloch, F. Pflocksch, A. Veléz, D. Wolk, N. Wunderer HZB, Berlin, Germany
	The VSR (Variable pulse length Storage Ring) demo module is a prototype for the superconducting upgrade of HZB’s Bessy II. The module houses two 1.5 GHz superconducting cavities operated at 1.8 K in continuous wave (CW) mode. Each cavity has five water cooled Waveguide HOM Absorbers with high thermal load (450 W), which requires them to be water cooled. This setup introduces several design challenges, concerning space restriction, the interconnection of warm and cold parts and the alignment. In order to provide support and steady alignment an innovative space frame was designed. The transition from cold to warm over the partially superconducting waveguides made a more complex design for shielding and cooling system necessary. With the design close to completion, we are now entering the purchase phase.
	Poster MOPTEV013 [3.239 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPTEV013
About •	Received ※ 21 June 2021 — Revised ※ 02 September 2021 — Accepted ※ 18 November 2021 — Issue date ※ 02 December 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTEV008	VSR Demo Cold String: Recent Developments and Manufacturing Status	647
	N. Wunderer, V. Dürr, A. Frahm, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, A.V. Tsakanian, A. Veléz HZB, Berlin, Germany M. Bonezzi, A. D’Ambros, R. Paparella INFN/LASA, Segrate (MI), Italy J. Guo, J. Henry, R.A. Rimmer JLab, Newport News, Virginia, USA J. Knobloch University of Siegen, Siegen, Germany A. Veléz Technical University Dortmund, Dortmund, Germany
	The BESSY VSR project aims to demonstrate the possibility to simultaneously run both long (15ps) and short bunches (1.7ps) within BESSY II storage ring. To achieve this, a new SRF cavity system with higher harmonic cavities (3 and 3.5 harm.) needs to be installed. The combined cavity SRF beating allows for stable bunch shortening for half of the buckets while standard lengths remaining for the other half. These SRF cavities will be equipped with waveguide-connected HOM absorbers and will be controlled with a blade tuner plus piezos. To demonstrate the feasibility of this complex system the VSR DEMO cold string consists of two 1.5 GHz cavities, each featuring five waveguides and a higher power coupler, plus all interconnecting elements coupled to the beam vacuum. For most of these components the fundamental development work is completed and has been reported in the past. This paper summarizes recent enhancements, component detailing and manufacturing status. The key cold string components such as cavities, higher power couplers and blade tuners have already entered the manufacturing phase. All other cold string components will be ready for purchase at the latest beginning of 2022.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV008
About •	Received ※ 18 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 22 November 2021 — Issue date ※ 05 January 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTEV009	The 1.5 GHz Coupler for VSR DEMO: Final Design Studies, Fabrication Status and Initial Testing Plans	652
	E. Sharples-Milne, V. Dürr, J. Knobloch, S. Schendler, A. Veléz, N. Wunderer HZB, Berlin, Germany J. Knobloch University of Siegen, Siegen, Germany A. Veléz Technical University Dortmund, Dortmund, Germany
	The variable pulse length storage ring demo (VSR DEMO) is a research and development project at the Helmholtz Zentrum Berlin (HZB) to develop and validate a 1.5 GHz SRF system capable of accelerating high CW currents (up to 300 mA) at high accelerating fields (20 MV/m) for application in electron storage rings. Such a system can be employed to tailor the bunch length in synchrotron light source such as BESSY II. VSR DEMO requires a module equipped with two 1.5 GHz 4-cell SRF cavities and all ancillary components required for accelerator operations. This includes one 1.5 GHz fundamental power coupler (FPC) per cavity, designed to handle 16 kW peak and 1.5 kW average power. The final design studies, fabrication status and initial testing plans for these FPCs will be presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV009
About •	Received ※ 21 June 2021 — Revised ※ 12 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 09 November 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The VSR Demo Module Design – A Spaceframe-Based Module for Cavities with Warm Waveguide HOM Absorbers

233

F. Glöckner, D. Böhlick, M. Bürger, V. Dürr, A. Frahm, J. Knobloch, F. Pflocksch, A. Veléz, D. Wolk, N. Wunderer
HZB, Berlin, Germany

The VSR (Variable pulse length Storage Ring) demo module is a prototype for the superconducting upgrade of HZB’s Bessy II. The module houses two 1.5 GHz superconducting cavities operated at 1.8 K in continuous wave (CW) mode. Each cavity has five water cooled Waveguide HOM Absorbers with high thermal load (450 W), which requires them to be water cooled. This setup introduces several design challenges, concerning space restriction, the interconnection of warm and cold parts and the alignment. In order to provide support and steady alignment an innovative space frame was designed. The transition from cold to warm over the partially superconducting waveguides made a more complex design for shielding and cooling system necessary. With the design close to completion, we are now entering the purchase phase.

Poster MOPTEV013 [3.239 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-MOPTEV013

About •

Received ※ 21 June 2021 — Revised ※ 02 September 2021 — Accepted ※ 18 November 2021 — Issue date ※ 02 December 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTEV008

VSR Demo Cold String: Recent Developments and Manufacturing Status

647

N. Wunderer, V. Dürr, A. Frahm, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, A.V. Tsakanian, A. Veléz
HZB, Berlin, Germany
M. Bonezzi, A. D’Ambros, R. Paparella
INFN/LASA, Segrate (MI), Italy
J. Guo, J. Henry, R.A. Rimmer
JLab, Newport News, Virginia, USA
J. Knobloch
University of Siegen, Siegen, Germany
A. Veléz
Technical University Dortmund, Dortmund, Germany

The BESSY VSR project aims to demonstrate the possibility to simultaneously run both long (15ps) and short bunches (1.7ps) within BESSY II storage ring. To achieve this, a new SRF cavity system with higher harmonic cavities (3 and 3.5 harm.) needs to be installed. The combined cavity SRF beating allows for stable bunch shortening for half of the buckets while standard lengths remaining for the other half. These SRF cavities will be equipped with waveguide-connected HOM absorbers and will be controlled with a blade tuner plus piezos. To demonstrate the feasibility of this complex system the VSR DEMO cold string consists of two 1.5 GHz cavities, each featuring five waveguides and a higher power coupler, plus all interconnecting elements coupled to the beam vacuum. For most of these components the fundamental development work is completed and has been reported in the past. This paper summarizes recent enhancements, component detailing and manufacturing status. The key cold string components such as cavities, higher power couplers and blade tuners have already entered the manufacturing phase. All other cold string components will be ready for purchase at the latest beginning of 2022.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV008

About •

Received ※ 18 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 22 November 2021 — Issue date ※ 05 January 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTEV009

The 1.5 GHz Coupler for VSR DEMO: Final Design Studies, Fabrication Status and Initial Testing Plans

652

E. Sharples-Milne, V. Dürr, J. Knobloch, S. Schendler, A. Veléz, N. Wunderer
HZB, Berlin, Germany
J. Knobloch
University of Siegen, Siegen, Germany
A. Veléz
Technical University Dortmund, Dortmund, Germany

The variable pulse length storage ring demo (VSR DEMO) is a research and development project at the Helmholtz Zentrum Berlin (HZB) to develop and validate a 1.5 GHz SRF system capable of accelerating high CW currents (up to 300 mA) at high accelerating fields (20 MV/m) for application in electron storage rings. Such a system can be employed to tailor the bunch length in synchrotron light source such as BESSY II. VSR DEMO requires a module equipped with two 1.5 GHz 4-cell SRF cavities and all ancillary components required for accelerator operations. This includes one 1.5 GHz fundamental power coupler (FPC) per cavity, designed to handle 16 kW peak and 1.5 kW average power. The final design studies, fabrication status and initial testing plans for these FPCs will be presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV009

About •

Received ※ 21 June 2021 — Revised ※ 12 August 2021 — Accepted ※ 21 August 2021 — Issue date ※ 09 November 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)