SRF2019 - List of Authors (Steder, L.)

Paper	Title	Page
MOP026	A Cross-Lab Qualification of Modified 120°C Baked Cavities	90
	M. Wenskat, D. Reschke, J. Schaffran, L. Steder, M. Wiencek DESY, Hamburg, Germany D. Bafia, A. Grassellino, O.S. Melnychuk Fermilab, Batavia, Illinois, USA A.D. Palczewski JLab, Newport News, Virginia, USA M. Wiencek IFJ-PAN, Kraków, Poland
	Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1. Within a global effort to understand and standardize the nitrogen-infusion and the low T bake procedure, one large grain and two fine grain single-cell cavity were treated and tested at FNAL and then send to other labs including DESY and JLab for further studies.
	Poster MOP026 [0.813 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP026
About •	paper received ※ 20 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP020	Statistical Analysis of the 120°C Bake Procedure of Superconducting Radio Frequency Cavities	444
	L. Steder, D. Reschke DESY, Hamburg, Germany
	DESY is and was very active in R&D related to SRF cavities. Many single and nine cell cavities with different surface treatment histories were tested vertically. Results of these cold tests are accelerating gradient and quality factor of the cavities. Using the large number of available datasets the parameters of the 120°C bake procedure, which is applied to avoid high-field Q-slope, are analysed. The impact of different durations and temperatures on accelerating gradient, quality factor and residual resistance is studied in detail and is compared to results obtained with the recently proposed procedure of modified low temperature bake. For this procedure additional four hours at temperatures around 75°C are implemented before the standard bake at about 120°C. Since the claim is, that cavities treated with such a modified procedure achieve extra-ordinary large accelerating gradients it is a very interesting research field for the European XFEL continuous wave mode upgrade. For this purpose cavities with high quality factors are needed, but in addition large maximal accelerating fields are required to maintain high energies in the pulsed operation mode of the accelerator.
	Poster TUP020 [0.747 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP020
About •	paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080	Status of the All Superconducting Gun Cavity at DESY	1087
	E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst DESY, Hamburg, Germany
	At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.
	Poster THP080 [7.365 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080
About •	paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAB8	Systematic Studies of the Second Sound Method for Quench Detection of Superconducting Radio Frequency Cavities	1239
	L. Steder, B. Bein, D. Reschke DESY, Hamburg, Germany W. Hillert University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	DESY conducts R&D for SRF cavities, part of the manifold activities are vertical performance tests. Besides the determination of accelerating gradient and quality factor, additional sensors and diagnostic methods are used to obtain more information about the cavity behaviour and the test environment. The second sound system is a tool for spatially resolved quench detection via oscillating super-leak transducers, they record the second sound wave, generated by the quench of the superconducting Niobium. The mounting of the sensors was improved to reduce systematic uncertainties and results of a recent master thesis are presented in the following. Different reconstruction methods are used to determine the origin of the waves. The precision, constraints and limits of these are compared. To introduce an external reference and to qualify the different methods a calibration tool was used. It injects short heat pulses to resistors at exact known space and time coordinates. Results obtained by the different algorithms and measurements with the calibration tool are presented with an emphasis on the possible spatial resolution and the estimation of systematic uncertainties of the methods.
	Slides FRCAB8 [3.039 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAB8
About •	paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A Cross-Lab Qualification of Modified 120°C Baked Cavities

90

M. Wenskat, D. Reschke, J. Schaffran, L. Steder, M. Wiencek
DESY, Hamburg, Germany
D. Bafia, A. Grassellino, O.S. Melnychuk
Fermilab, Batavia, Illinois, USA
A.D. Palczewski
JLab, Newport News, Virginia, USA
M. Wiencek
IFJ-PAN, Kraków, Poland

Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1.
Within a global effort to understand and standardize the nitrogen-infusion and the low T bake procedure, one large grain and two fine grain single-cell cavity were treated and tested at FNAL and then send to other labs including DESY and JLab for further studies.

Poster MOP026 [0.813 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP026

About •

paper received ※ 20 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP020

Statistical Analysis of the 120°C Bake Procedure of Superconducting Radio Frequency Cavities

444

L. Steder, D. Reschke
DESY, Hamburg, Germany

DESY is and was very active in R&D related to SRF cavities. Many single and nine cell cavities with different surface treatment histories were tested vertically. Results of these cold tests are accelerating gradient and quality factor of the cavities. Using the large number of available datasets the parameters of the 120°C bake procedure, which is applied to avoid high-field Q-slope, are analysed. The impact of different durations and temperatures on accelerating gradient, quality factor and residual resistance is studied in detail and is compared to results obtained with the recently proposed procedure of modified low temperature bake. For this procedure additional four hours at temperatures around 75°C are implemented before the standard bake at about 120°C. Since the claim is, that cavities treated with such a modified procedure achieve extra-ordinary large accelerating gradients it is a very interesting research field for the European XFEL continuous wave mode upgrade. For this purpose cavities with high quality factors are needed, but in addition large maximal accelerating fields are required to maintain high energies in the pulsed operation mode of the accelerator.

Poster TUP020 [0.747 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP020

About •

paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080

Status of the All Superconducting Gun Cavity at DESY

1087

E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst
DESY, Hamburg, Germany

At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.

Poster THP080 [7.365 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080

About •

paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCAB8

Systematic Studies of the Second Sound Method for Quench Detection of Superconducting Radio Frequency Cavities

1239

L. Steder, B. Bein, D. Reschke
DESY, Hamburg, Germany
W. Hillert
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

DESY conducts R&D for SRF cavities, part of the manifold activities are vertical performance tests. Besides the determination of accelerating gradient and quality factor, additional sensors and diagnostic methods are used to obtain more information about the cavity behaviour and the test environment. The second sound system is a tool for spatially resolved quench detection via oscillating super-leak transducers, they record the second sound wave, generated by the quench of the superconducting Niobium. The mounting of the sensors was improved to reduce systematic uncertainties and results of a recent master thesis are presented in the following. Different reconstruction methods are used to determine the origin of the waves. The precision, constraints and limits of these are compared. To introduce an external reference and to qualify the different methods a calibration tool was used. It injects short heat pulses to resistors at exact known space and time coordinates. Results obtained by the different algorithms and measurements with the calibration tool are presented with an emphasis on the possible spatial resolution and the estimation of systematic uncertainties of the methods.

Slides FRCAB8 [3.039 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-FRCAB8

About •

paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)