SRF2017 - List of Authors (Einstein, J.)

Paper	Title	Page
FRXBA02	High Precision RF Control for SRF Cavities in LCLS-II	944
	L.R. Doolittle, K.S. Campbell, Q. Du, G. Huang, J.A. Jones, C. Serrano, V.K. Vytla LBNL, Berkeley, California, USA S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, D.B. Greg, B. Hong, R.S. Kelly, A. McCollough, A. Ratti, C.H. Rivetta SLAC, Menlo Park, California, USA R. Bachimanchi, C. Hovater, D.J. Seidman JLab, Newport News, Virginia, USA B.E. Chase, E. Cullerton, J. Einstein, D.W. Klepec Fermilab, Batavia, Illinois, USA
	Funding: This work supported under DOE Contract DE-AC02-76SF00515 The unique properties of SRF cavities enable a new generation of X-ray light sources in XFEL and LCLS-II. The LCLS-II design calls for 280 L-band cavities to be operated in CW mode with a Q_L of 4x10⁷, using Single-Source Single-Cavity control. The target RF field stability is 0.01% and 0.01 degree for the band above 1 Hz. Hardware and software implementing a digital LLRF system has been constructed by a four-lab collaboration to minimize known contributors to cavity RF field fluctuation. Efforts include careful attachment to the phase reference line, and minimizing the effects of RF crosstalk by placing forward and reverse signals in chassis separate from the cavity measurement. A low-noise receiver/digitizer section will allow feedback to operate with high proportional gain without excessive noise being sent to the drive amplifier. Test results will show behavior on prototype cryomodules at FNAL and JLab, ahead of the 2018 final accelerator installation.
	Slides FRXBA02 [3.425 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-FRXBA02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

High Precision RF Control for SRF Cavities in LCLS-II

944

L.R. Doolittle, K.S. Campbell, Q. Du, G. Huang, J.A. Jones, C. Serrano, V.K. Vytla
LBNL, Berkeley, California, USA
S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, D.B. Greg, B. Hong, R.S. Kelly, A. McCollough, A. Ratti, C.H. Rivetta
SLAC, Menlo Park, California, USA
R. Bachimanchi, C. Hovater, D.J. Seidman
JLab, Newport News, Virginia, USA
B.E. Chase, E. Cullerton, J. Einstein, D.W. Klepec
Fermilab, Batavia, Illinois, USA

Funding: This work supported under DOE Contract DE-AC02-76SF00515
The unique properties of SRF cavities enable a new generation of X-ray light sources in XFEL and LCLS-II. The LCLS-II design calls for 280 L-band cavities to be operated in CW mode with a Q_L of 4x10⁷, using Single-Source Single-Cavity control. The target RF field stability is 0.01% and 0.01 degree for the band above 1 Hz. Hardware and software implementing a digital LLRF system has been constructed by a four-lab collaboration to minimize known contributors to cavity RF field fluctuation. Efforts include careful attachment to the phase reference line, and minimizing the effects of RF crosstalk by placing forward and reverse signals in chassis separate from the cavity measurement. A low-noise receiver/digitizer section will allow feedback to operate with high proportional gain without excessive noise being sent to the drive amplifier. Test results will show behavior on prototype cryomodules at FNAL and JLab, ahead of the 2018 final accelerator installation.

Slides FRXBA02 [3.425 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2017-FRXBA02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)