Paper |
Title |
Page |
TUPSA061 |
Comparative Research of Low Energy Beam Transport Systems for H-minus Ion Beam |
333 |
|
- B.A. Frolov
IHEP, Moscow Region, Russia
- V.S. Klenov
RAS/INR, Moscow, Russia
|
|
|
The source of H-minus ions for the injection in LU-30 accelerator is being constructed at IHEP. A three-dimensional (3D)simulation code IBSimu has been utilized for modeling of the transport and matching system of beam from the H-minus ion source into RFQ. A magnetic low energy beam transport (LEBT) line consisting of two solenoids and LEBT consisting of six magnetic quadrupole lenses were analyzed. The particle data from the 50 mA 100 keV ion beam extraction system simulations were taken as the starting data for the LEBT simulations. The main objective of the project was to achieve the required Twiss parameters and to minimize emittance growth at RFQ entrance. The LEBT consisting of two solenoids is more convenient in adjustment and as simulation results have shown this system offers more acceptable beam characteristics at the match point in comparison with LEBT composed of quadrupole lenses.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPSC031 |
Power Supplies for IHEP Negative Hydrogen Ions Source |
612 |
|
- B.A. Frolov
IHEP, Moscow Region, Russia
- V.S. Klenov, V. Zubets
RAS/INR, Moscow, Russia
|
|
|
The source of negative hydrogen ions is constructed at IHEP for the implementation of multiturn charge-exchange injection to increase the intensity of IHEP buster. Surface-plasma ion souce (SPS) with Penning discharge is selected as a source of H-minus ions. A set of power supplies for SPS, which includes the extraction voltage power supply, the discharge power supplies, the hydrogen gas pulse valve power supply, cesium oven and cesium storage device temperature controllers, was designed, constructed and tested on the equivalent loads. This set of power supplies will allows for commissioning and testing the ion source with the beam extraction energy up to 25 keV and repetition rate 25 Hz.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPSC053 |
The Pepper-Pot Emittance Measuring Device at the 400 keV H-minus LEBT Channel |
653 |
|
- V.S. Klenov, S. Bragin, O.T. Frolov, S.E. Golubovski, O.V. Grekhov, O. Volodkevich, V. Zubets
RAS/INR, Moscow, Russia
|
|
|
The emittance measuring device has been developed for operational control of INR RAS linac 400 keV H-minus injector beam parameters. It includes the "pepper-pot", the quartz screen, the CCD camera, PC, the software for camera data processing and beam phase portrait formation. The device has been mounted at the first straight section extension of H-minus LEBT after 45 degree bending magnet. When the bending magnet is switched off the device is possible to measure and to represent single shot beam phase portrait. The results of the H-minus beam emittance measurements and the device performance have been discussed.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|