Author: Butenko, A.V.
Paper Title Page
FRCAMH01 Status of the Nuclotron 150
 
  • A.O. Sidorin, N.N. Agapov, A.V. Alfeev, V. Andreev, V. Batin, O.I. Brovko, V.V. Bugaev, A.V. Butenko, D.E. Donets, A.V. Eliseev, V.V. Fimushkin, E.V. Gorbachev, A. Govorov, A.Yu. Grebentsov, E.V. Ivanov, V. Karpinsky, H.G. Khodzhibagiyan, A. Kirichenko, V. Kobets, A.D. Kovalenko, O.S. Kozlov, K.A. Levterov, V.A. Mikhailov, V.A. Monchinsky, A. Nesterov, Yu.M. Nozhenko, A.L. Osipenkov, S. Romanov, P.A. Rukojatkin, A.A. Shurygin, I. Slepnev, V. Slepnev, A.V. Smirnov, E. Syresin, G.V. Trubnikov, A. Tuzikov, B. Vasilishin, V. Volkov
    JINR, Dubna, Moscow Region, Russia
  • A. Belov
    RAS/INR, Moscow, Russia
  • I.V. Gorelyshev, A.V. Philippov
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • A.O. Sidorin
    St. Petersburg University, St. Petersburg, Russia
 
  Since last RuPAC two runs of the Nuclotron operation were performed: in January - March of 2015 and June 2016. Presently we are providing the run, which has been started at the end of October and will be continued up to the end of December. The facility development is aimed to the performance increase for current physical program realization and preparation to the NICA Booster construction and Baryonic Matter at Nuclotron experiment.  
slides icon Slides FRCAMH01 [20.777 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH05 Booster Synchrotron at NICA Accelerator Complex 160
 
  • A. Tuzikov, O.I. Brovko, A.V. Butenko, A.V. Eliseev, A.A. Fateev, V. Karpinsky, H.G. Khodzhibagiyan, S.A. Kostromin, I.N. Meshkov, V.A. Mikhaylov, A.O. Sidorin, A.I. Sidorov, A.V. Smirnov, E. Syresin, G.V. Trubnikov, V. Volkov
    JINR, Dubna, Moscow Region, Russia
  • O. Anchugov, V.A. Kiselev, D.A. Shvedov, A.N. Zhuravlev
    BINP SB RAS, Novosibirsk, Russia
 
  NICA is the new complex being constructed on the JINR aimed to provide collider experiments with ions up to aurum at energy of 4.5x4.5 GeV/u. The NICA layout includes 600 MeV/u Booster synchrotron as a part of the injection chain of the NICA Collider. The main goals of the Booster are the following: accumulation of 4E109 Au31+ ions; acceleration of the heavy ions up to energy required for effective stripping; forming of the required beam emittance with electron cooling system. The layout makes it possible to place the Booster having 210.96 m circumference and four fold symmetry lattice inside the yoke of the former Synchrophasotron. The features of the Booster, its main systems, their parameters and current status are presented in this paper.  
slides icon Slides FRCAMH05 [16.830 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH07 NICA Collider Lattice Optimization 166
 
  • O.S. Kozlov, A.V. Butenko, H.G. Khodzhibagiyan, S.A. Kostromin, I.N. Meshkov, A.O. Sidorin, E. Syresin, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
 
  The Nuclotron-based Ion Collider fAcility (NICA) - accelerator complex is being constructed at JINR. It is aimed to the collider experiments with ions and protons and has to provide the ion-ion (Au+79) and ion-proton collision in the energy range of 1-4.5 GeV/amu and also polarized proton-proton and deuteron-deuteron collisions. Each of two collider ring has a racetrack shape with two bending arcs and two long straight sections. Beams are separated in vertical plane and come into collisions in two IPs. Dynamic aperture of the NICA collider has been studied for different parameters of the optics at IP. Effects of the fringe fields of structural elements are considered in the optimization of the collider lattice.  
slides icon Slides FRCAMH07 [4.547 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPSA028 QWR resonator Cavities Electrodynamics Simulations for new Nuclotron-NICA Injector 273
 
  • M. Gusarova, T. Kulevoy, M.V. Lalayan, S.M. Polozov, N.P. Sobenin, D.V. Surkov, S.A. Terekhov, S.E. Toporkov, V. Zvyagintsev
    MEPhI, Moscow, Russia
  • A.V. Butenko, A.O. Sidorin, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
  • V. Zvyagintsev
    TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
 
  New linac-injector for Nuclotron-NICA is planned to consist of quarter-wave coaxial cavities (QWR) having velocities of ~0.07c and ~0.12c (beam energy from 5 to 17 MeV). These cavities are to be superconducting and operating at 162 MHz. Current results of the QWR cavities electrodynamics simulations and geometry optimizations are presented.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPSA038 The RF Power System for RFQ-Injector of Linac-20 297
 
  • V.G. Kuzmichev, A.V. Kozlov, T. Kulevoy, S.M. Polozov, D.N. Selesnev, Yu. Stasevich
    ITEP, Moscow, Russia
  • A.V. Butenko
    JINR, Dubna, Moscow Region, Russia
  • T. Kulevoy, S.M. Polozov
    MEPhI, Moscow, Russia
 
  In the frame of the Nuclotron-M project the electrostatic injector of LU-20 is replaced by a RFQ accelerator, which has been developed in ITEP. The construction of 400 kW, 145 MHz RF system for RFQ-injector are described. Pa-rameters and test results of the RF power system operated on the resistive load and on RFQ during ion beam accele-ration are presented  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPSB037 Beam Transfer From Heavy-Ion Linear Accelerator HILAC Into Booster of NICA Accelerator Complex 443
 
  • A. Tuzikov, A.V. Butenko, A.A. Fateev, S.Yu. Kolesnikov, I.N. Meshkov, V.A. Mikhaylov, V.S. Shvetsov, A.O. Sidorin, A.I. Sidorov, G.V. Trubnikov, V. Volkov
    JINR, Dubna, Moscow Region, Russia
 
  Designs of systems of ion beam transfer from the linear accelerator HILAC into the Booster of the NICA accelerator complex (JINR, Dubna) including the transport beam line HILAC-Booster and the beam injection system of the Booster are considered in the report. The proposed systems provide multivariant injection for accumulation of beams in the Booster with required intensity. Special attention is paid to various aspects of beam dynamics during its transfer. Main methods of beam injection into the Booster are described. These are single-turn, multiturn and multiple injection ones. Results of beam dynamics simulations are presented. Status of technical design and manufacturing of the systems' equipment is also highlighted.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC018 Achievement of Necessary Vacuum Conditions in the NICA Accelerator Complex 575
 
  • A.V. Smirnov, A.M. Bazanov, A.V. Butenko, A.R. Galimov, H.G. Khodzhibagiyan, A. Nesterov, A.N. Svidetelev, A. Tikhomirov
    JINR, Dubna, Moscow Region, Russia
 
  NICA is a new accelerator collider complex under construction at the Joint Institute for Nuclear Research in Dubna. The facility is aimed at providing collider experiments with heavy ions up to Gold in a center of mass energy range from 4 to 11 GeV/u and an average luminosity up to 1027 cm-2 s-1. The collisions of polarized deuterons are also foreseen. The facility includes two injector chains, a new superconducting booster synchrotron, the existing superconducting synchrotron Nuclotron, and a new superconducting collider consisting of two rings, each of about 500 m in circumference. Vacuum volumes of the accelerator booster and Nuclotron and the superconducting collider are divided into volumes of superconducting elements thermal enclosure and beam chambers. The beam chambers consist regular cold periods, which are at a temperature of 4.2K to 80K, and warm irregular gaps at room temperature. Operating pressure in the thermal enclosure vacuum volumes have to maintained in the range of 10-7 to 10-4 mbar, in the beam chamber cold and warm areas - not more than 2·10-11 mbar. The requirements for materials, surface preparation conditions and the level of leakage in the vacuum volume are set out. The description of way to achievement and maintenance of the working vacuum in the NICA project are presented.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC041 New Superconducting Linac Injector Project for Nuclotron-Nica: Current Results 626
 
  • S.M. Polozov, M. Gusarova, T. Kulevoy, M.V. Lalayan, A.V. Samoshin, S.E. Toporkov, V. Zvyagintsev
    MEPhI, Moscow, Russia
  • M.A. Baturitski, S.A. Maksimenko
    INP BSU, Minsk, Belarus
  • A.V. Butenko, A.O. Sidorin, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
  • A.A. Marysheva, V.S. Petrakovsky, I.L. Pobol, A.I. Pokrovsky, D.A. Shparla, S.V. Yurevich
    Physical-Technical Institute of the National Academy of Sciences of Belarus, Minsk, Belarus
  • V. Zvyagintsev
    TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
 
  The joint collaboration of JINR, NRNU MEPhI, INP BSU, PTI NASB, BSUIR and SPMRC NASB started in 2015 a new project on the development of superconducting cavities production and test technologies and new linac-injector design. This linac intend for the protons acceleration up to25 MeV (up to 50 MeV after upgrade) and light ions acceleration up to ~7.5 MeV/u for Nuclotron-NICA injection. Current status of linac general design and results of the beam dynamics simulation and SRF technology development are presented in this report.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH02 Commissioning of New Light Ion RFQ Linac and First Nuclotron Run with New Injector 153
 
  • A.V. Butenko, A.M. Bazanov, D.E. Donets, A.D. Kovalenko, K.A. Levterov, D.A. Lyuosev, A.A. Martynov, V.V. Mialkovskiy, D.O. Ponkin, R.G. Pushkar, V.V. Seleznev, K.V. Shevchenko, I.V. Shirikov, A.O. Sidorin
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • S.V. Barabin, A.V. Kozlov, G. Kropachev, T. Kulevoy, V.G. Kuzmichev
    ITEP, Moscow, Russia
  • A. Belov
    RAS/INR, Moscow, Russia
  • V.V. Fimushkin, B.V. Golovenskiy, A. Govorov, V. Kobets, V.A. Monchinsky, A.V. Smirnov, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
  • S.M. Polozov
    MEPhI, Moscow, Russia
 
  The new accelerator complex Nuclotron-based Ion Collider fAcility (NICA) is now under development and construction at JINR, Dubna. This complex is assumed to operate using two injectors: the Alvarez-type linac LU-20 as injector of light ions, polarized protons and deuterons and a new linac HILAc - injector of heavy ions beams. Old HV for-injector of the LU-20, which operated from 1974, is replaced by the new RFQ accelerator, which was commissioned in spring 2016. The first Nuclotron technological run with new fore-injector was performed in June 2016. Beams of D+ and H2+ were successfully injected and accelerated in the Nuclotron ring. Main results of the RFQ commissioning and the first Nuclotron run with new for-injector is discussed in this paper.  
slides icon Slides FRCAMH02 [30.140 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH03 Commissioning of the New Heavy Ion Linac at the NICA Project 156
 
  • A.V. Butenko, A.M. Bazanov, D.E. Donets, A.D. Kovalenko, K.A. Levterov, D.A. Lyuosev, A.A. Martynov, V.V. Mialkovskiy, V.V. Seleznev, K.V. Shevchenko, I.V. Shirikov, A.O. Sidorin
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • B.V. Golovenskiy, A. Govorov, V. Kobets, V.A. Monchinsky, A.V. Smirnov, E. Syresin, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
  • H. Hoeltermann, H. Podlech, U. Ratzinger, A. Schempp
    BEVATECH, Frankfurt, Germany
  • D.A. Liakin
    ITEP, Moscow, Russia
 
  The new accelerator complex Nuclotron-based Ion Collider fAcility (NICA) is now under development and construction at JINR, Dubna. This complex is assumed to operate using two injectors: modernized old Alvarez-type linac LU-20 as injector of light polarized ions and a new Heavy Ion Linear Accelerator HILAc - injector of heavy ions beams. The new heavy ion linac accelerate ions with q/A values above 0.16 to 3.2 MeV/u is under commissioning. The main components are 4-Rod-RFQ and two IH - drift tube cavities is operated at 100.6 MHz. Main results of the HILAc commissioning with carbon beam from the laser ion source are discussed.  
slides icon Slides FRCAMH03 [14.452 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)