RuPAC2014 - List of Authors (Belov, A.)

Paper

Title

Page

INR RAS Linac Proton Injector 100 Hz PRR Operation Mode

306

A. Belov, O.T. Frolov, L.P. Nechaeva, E.S. Nikulin, A.V. Turbabin, V. Zubets
RAS/INR, Moscow, Russia

The injector provides INR RAS linac by proton beam with energy 400 keV, 200 mks pulse duration at pulse repetition rate 50 Hz. PRR of the proton injector has been increased to 100 Hz with goal of rising the accelerator average beam current. Main stages and results of the injector modernization are presented.

Slides THCE01 [3.518 MB]

FRCA02

Time Dependence of Ion Beam Transverse Phase-Space Portrait Orientation During Linac Proton Injector Pulse

459

O.T. Frolov, A. Belov, S.E. Golubovskiy, E.S. Nikulin, V. Zubets
RAS/INR, Moscow, Russia

As a result of analysis conducted a transients of the 400 kV column intermediate electrode potential have been determined as one of the main processes responsible for change of beam phase-space portrait orientation during 200 mks, 50 Hz proton injector high voltage accelerating pulse. Beam transport simulation shows high sensitivity of the beam phase-space portrait orientation to variation of the intermediate electrode potential. It has been found that significant variation of this potential takes place due to transition process during a pulse in the capacitor-resistor voltage water divider of the accelerating tube. The divider capacities matching procedure has been performed. The beam emittance measurements results have shown that within the accuracy of observation the beam transverse phase-space portrait orientation remains constant during injector pulse with the accelerating tube voltage divider being compensated.

Slides FRCA02 [0.824 MB]

Paper	Title	Page
THCE01	INR RAS Linac Proton Injector 100 Hz PRR Operation Mode	306
	A. Belov, O.T. Frolov, L.P. Nechaeva, E.S. Nikulin, A.V. Turbabin, V. Zubets RAS/INR, Moscow, Russia
	The injector provides INR RAS linac by proton beam with energy 400 keV, 200 mks pulse duration at pulse repetition rate 50 Hz. PRR of the proton injector has been increased to 100 Hz with goal of rising the accelerator average beam current. Main stages and results of the injector modernization are presented.
	Slides THCE01 [3.518 MB]

FRCA02	Time Dependence of Ion Beam Transverse Phase-Space Portrait Orientation During Linac Proton Injector Pulse	459
	O.T. Frolov, A. Belov, S.E. Golubovskiy, E.S. Nikulin, V. Zubets RAS/INR, Moscow, Russia
	As a result of analysis conducted a transients of the 400 kV column intermediate electrode potential have been determined as one of the main processes responsible for change of beam phase-space portrait orientation during 200 mks, 50 Hz proton injector high voltage accelerating pulse. Beam transport simulation shows high sensitivity of the beam phase-space portrait orientation to variation of the intermediate electrode potential. It has been found that significant variation of this potential takes place due to transition process during a pulse in the capacitor-resistor voltage water divider of the accelerating tube. The divider capacities matching procedure has been performed. The beam emittance measurements results have shown that within the accuracy of observation the beam transverse phase-space portrait orientation remains constant during injector pulse with the accelerating tube voltage divider being compensated.
	Slides FRCA02 [0.824 MB]