| Paper |
Title |
Page |
| MOZAKI01 |
Compensation of the Crossing Angle with Crab Cavities at KEKB
|
27 |
| |
- K. Oide, T. Abe, K. Akai, M. Akemoto, A. Akiyama, A. Arinaga, K. Ebihara, K. Egawa, A. Enomoto, J. W. Flanagan, S. Fukuda, H. Fukuma, Y. Funakoshi, K. Furukawa, T. Furuya, K. Hara, T. Higo, S. Hiramatsu, H. Hisamatsu, H. Honma, K. Hosoyama, T. Ieiri, N. Iida, H. Ikeda, M. Ikeda, S. Isagawa, H. Ishii, A. Kabe, E. Kadokura, T. Kageyama, K. Kakihara, E. Kako, S. Kamada, T. Kamitani, K.-I. Kanazawa, H. Katagiri, S. Kato, T. Kawamoto, S. Kazakov, M. Kikuchi, E. Kikutani, K. Kitagawa, H. Koiso, Y. Kojima, K. Komada, T. Kubo, K. Kudo, N. K. Kudo, K. Marutsuka, M. Masuzawa, S. Matsumoto, T. Matsumoto, S. Michizono, K. Mikawa, T. Mimashi, S. Mitsunobu, K. Mori, A. Morita, Y. Morita, H. Nakai, H. Nakajima, T. T. Nakamura, H. Nakanishi, K. Nakao, S. Ninomiya, Y. Ogawa, K. Ohmi, Y. Ohnishi, S. Ohsawa, Y. Ohsawa, N. Ohuchi, M. Ono, T. Ozaki, K. Saito, H. Sakai, Y. Sakamoto, M. Sato, M. Satoh, K. Shibata, T. Shidara, M. Shirai, A. Shirakawa, T. Sueno, M. Suetake, Y. Suetsugu, R. Sugahara, T. Sugimura, T. Suwada, O. Tajima, S. Takano, S. Takasaki, T. Takenaka, Y. Takeuchi, M. Tawada, M. Tejima, M. Tobiyama, N. Tokuda, S. Uehara, S. Uno, Y. Yamamoto, Y. Yano, K. Yokoyama, Ma. Yoshida, M. Yoshida, S. I. Yoshimoto, K. Yoshino
KEK, Ibaraki
- E. Perevedentsev, D. N. Shatilov
BINP SB RAS, Novosibirsk
|
|
| |
The crab cavities are presently being installed in the KEKB rings to compensate the crossing angle at collision and thus increase luminosity. This will be the first experience with such cavities in colliders. Results on the beam operation of the new cavities, both for single and colliding beams, will be presented including the luminosity performance and limitations.
Work presented on behalf of the KEKB Accelerator Group.
|
|
|
Slides
|
|
| MOPAN045 |
Longitudinal Particle Tracking of J-PARC RCS for Synchronization
|
260 |
| |
- M. Yamamoto, K. Hasegawa, M. Nomura, A. Schnase, F. Tamura
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
- S. Anami, E. Ezura, K. Hara, C. Ohmori, A. Takagi, M. Toda, M. Yoshii
KEK, Ibaraki
|
|
| |
We have performed particle tracking simulation of J-PARC RCS to study the synchronization process. A frequency offset is added to the nominal RF frequency pattern to shift the center of the bunch, under the condition of the offset value should be 'adiabatic' with respect to the synchrotron motion. Since the synchrotron frequency of the J-PARC RCS is substantially changed during acceleration, the particle tracking simulation helps to decide upper limit of the frequency offset which can be employed.
|
|
| TUPAN055 |
Present Status of J-PARC Ring RF Ring RF Systems
|
1511 |
| |
- M. Yoshii, S. Anami, E. Ezura, K. Hara, Y. Hashimoto, C. Ohmori, A. Takagi, M. Toda
KEK, Ibaraki
- K. Haga, K. Hasegawa, M. Nomura, A. Schnase, F. Tamura, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
|
|
| |
The RCS high frequency accelerating systems are prepared for beam commissioning in September 2007. Installations of cavities, power supplies and amplifiers have been carried out. The systems have been checked for operation and interoperability. For the MR high frequency accelerating system, the examination of the whole system and its final adjustment are done aiming at installation in October 2007. Here, we report on various issues which had been found and solved during the examination and installation period.
masahito.yoshii@kek.jp
|
|
| TUPAN063 |
High Power Test of MA Cavity for J-PARC RCS
|
1532 |
| |
- M. Yamamoto, K. Hasegawa, M. Nomura, A. Schnase, F. Tamura
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
- S. Anami, E. Ezura, K. Hara, C. Ohmori, A. Takagi, M. Toda, M. Yoshii
KEK, Ibaraki
|
|
| |
We have been testing the RF cavities for the J-PARC RCS, we can operate the cavities without sever problems. Before some MA cores were damaged, then we found such cores have low ribbon resistance. After that we have tested the cavities loaded with improved ribbon resistance.
|
|
| WEPMN038 |
Development of the Beam Chopper Timing System for Multi-Turn Injection to the J-PARC RCS
|
2125 |
| |
- F. Tamura
JAEA/LINAC, Ibaraki-ken
- S. Anami, E. Ezura, K. Hara, C. Ohmori, A. Takagi, M. Toda, M. Yoshii
KEK, Ibaraki
- K. Hasegawa, M. Nomura, A. Schnase, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
|
|
| |
Multi-turn injection using charge exchange is employed for the J-PARC Rapid Cycling Synchrotron (RCS). To improve the bunching factor of the beam in the ring, the momentum offset injection scheme is used. In each turn, the bunch trains from the linac are injected into the RF buckets with a momentum offset. The bunch train is called the "intermediate pulse". The intermediate pulses are generated in the low energy section of the linac by the RF chopper and pre-chopper. Since the pulse must be synchronized to the RF voltage in the ring, the timing signals for the choppers are generated by the low-level RF (LLRF) system of the RCS and the signals are sent to the chopper control. The RF chopper and the pre-choppers require different pulse widths. Thanks to the direct digital synthesis (DDS) in the LLRF system, precise zero-cross signals for the reference of the chopper pulses are generated without difficulties. The cable route from the RCS LLRF system to the linac chopper control system is more than one kilometer. Thus, the chopper pulses are sent via optical cables. We developed the chopper timing module. We describe the details of the hardware and the preliminary test results.
|
|
| WEPMN040 |
MA Cavities for J-PARC with Controlled Q-value by External Inductor
|
2131 |
| |
- A. Schnase, M. Nomura, F. Tamura, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken
- S. Anami, E. Ezura, K. Hara, K. Hasegawa, C. Ohmori, A. Takagi, M. Toda, M. Yoshii
KEK, Ibaraki
|
|
| |
The original J-PARC RCS cavity design* used cut-cores to control the Q-value. Adjusting the distance between the C-shaped core parts the optimum Q=2 is reached. Because of problems related to the cut-core surfaces, the "hybrid cavity" was introduced, using tanks with uncut cores (Q=0.6) in parallel to tanks with cut cores with a wider gap (Q=4), resulting in total Q=2. This was successfully tested. The manufacturing procedure for cut-cores involves more steps than for uncut cores. To reduce risks for long-term operation, the RCS cavities will be loaded with uncut cores for day-1 operation. With uncut cores (Q=0.6) the maximum beam power is limited. Therefore we introduce a parallel inductor, placed in the push-pull tube amplifier driving the cavity, to adjust the Q-value to 2. Parallel vacuum capacitors shift the resonance near to 1.7 MHz. Each of the 10 cavity systems for RCS, necessary for day-1 operation, is tested for at least 300 hours to detect initial problems before installation into the RCS tunnel. We report the results of cavity performance tests with external inductor, which simulate 25Hz operation and the optimization of the combined system of cavity and amplifier.
* C. Ohmori at. al, "High Field-Gradient Cavity for J-PARC 3 GeV RCS", PAC 2004
|
|
| THICKI04 |
Development of STF Cryogenic System in KEK
|
2701 |
| |
- J. Yoshida
Hitachi Plant Technologies, Ltd., Tokyo
- K. Hara, K. Hosoyama, Y. Kojima, H. Nakai, K. Nakanishi
KEK, Ibaraki
- T. Ichitani, S. Kaneda
Taiyo Nippon Sanso Corporation, Kawasaki-city Kanagawa Pref.
- T. Kanekiyo
Hitachi Technologies and Services Co., Ltd., Kandatsu, Tsuchiura
- M. Noguchi
Mayekawa MFG. Co., Ltd., Moriya
- S. Sakuma, K. Suzuki
Taiyo Nippon Sanso Higashikanto Corporation, Hitachi-shi, Ibaraki-Perf.
|
|
| |
Under the leadership of KEK, the collaborating design activity has been performed in KEK in order to develop the STF (Superconducting RF Test Facility) cryogenic system, together with some positive Japanese industrial members. As the first activity of the collaboration, the initial plant of STF cryogenic system with capacity of 30W at 2.0K has been constructed for the testing of STF cryomodule, and been ready for its operation in KEK. In this session, the present status and schedule of STF cryogenic system in KEK shall be briefly reported.
|
|
|
|
Slides
|
|
| TUPAN045 |
Beam Operation with Crab Cavities at KEKB
|
1487 |
| |
- H. Koiso, T. Abe, T. A. Agoh, K. Akai, M. Akemoto, A. Akiyama, A. Arinaga, K. Ebihara, K. Egawa, A. Enomoto, J. W. Flanagan, S. Fukuda, H. Fukuma, Y. Funakoshi, K. Furukawa, T. Furuya, K. Hara, T. Higo, S. Hiramatsu, H. Hisamatsu, H. Honma, T. Honma, K. Hosoyama, T. Ieiri, N. Iida, H. Ikeda, M. Ikeda, S. Inagaki, S. Isagawa, H. Ishii, A. Kabe, E. Kadokura, T. Kageyama, K. Kakihara, E. Kako, S. Kamada, T. Kamitani, K.-I. Kanazawa, H. Katagiri, S. Kato, T. Kawamoto, S. Kazakov, M. Kikuchi, E. Kikutani, K. Kitagawa, Y. Kojima, I. Komada, T. Kubo, K. Kudo, N. K. Kudo, K. Marutsuka, M. Masuzawa, S. Matsumoto, T. Matsumoto, S. Michizono, K. Mikawa, T. Mimashi, S. Mitsunobu, K. Mori, A. Morita, Y. Morita, H. Nakai, H. Nakajima, T. T. Nakamura, H. Nakanishi, K. Nakao, S. Ninomiya, Y. Ogawa, K. Ohmi, Y. Ohnishi, S. Ohsawa, Y. Ohsawa, N. Ohuchi, K. Oide, M. Ono, T. Ozaki, K. Saito, H. Sakai, Y. Sakamoto, M. Sato, M. Satoh, K. Shibata, T. Shidara, M. Shirai, A. Shirakawa, T. Sueno, M. Suetake, Y. Suetsugu, R. Sugahara, T. Sugimura, T. Suwada, O. Tajima, S. Takano, S. Takasaki, T. Takenaka, Y. Takeuchi, M. Tawada, M. Tejima, M. Tobiyama, N. Tokuda, S. Uehara, S. Uno, Y. Yamamoto, Y. Yano, K. Yokoyama, Ma. Yoshida, M. Yoshida, S. I. Yoshimoto, K. Yoshino
KEK, Ibaraki
- E. Perevedentsev
BINP SB RAS, Novosibirsk
|
|
| |
Beam operation with crab cavities is planned in early 2007 at KEKB. The crab crossing scheme is expected to increase the vertical beam-beam tune-shift parameter significantly. One crab cavity will be installed in each ring where conditions for beam optics are matched to compensate the beam crossing angle of 22 mrad. Operation results on collision tuning with the crab cavities will be presented.
For the KEKB Accelerator Group.
|
|