A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z    

Pinayev, I.P.

Paper Title Page
MPPT085 Fast Magnets for the NSLS-II Injection 4165
 
  • I.P. Pinayev, T.V. Shaftan
    BNL, Upton, Long Island, New York
  
  Funding: Under Contract with the U.S. Department of Energy Contract Number DE-AC02-98CH10886.

Third generation light sources require top-off operation in order to provide proper stability of the photon beam. In this paper we present the conceptual design of the fast pulsed magnets used for injection into the 3 GeV storage ring.

 
TOAB003 First Results from the DUV-FEL Upgrade at BNL
 
  • X.J. Wang, J.B. Murphy, I.P. Pinayev, G. Rakowsky, J. Rose, T.V. Shaftan, B. Sheehy, J. Skaritka, Z. Wu, L.-H. Yu
    BNL, Upton, Long Island, New York
  • H. Loos
    SLAC, Menlo Park, California
  
  The DUV-FEL at BNL is the world’s only facility dedicated to laser-seeded FEL R&D and its applications. Tremendous progress was made in both HGHG FEL and its applications in the last couple years.*,** In response to the requests of many users to study chemical science at the facility, the DUV-FEL linac was upgraded from 200 to 300 MeV to enable the HGHG FEL to produce 100 uJ pulses of 100 nm light. This will establish the DUV FEL as a premier user facility for ultraviolet radiation and enable state-of-the-art gas phase photochemistry research. The upgraded facility will also make possible key R&D experiments such as higher harmonic HGHG (n>5) that would lay the groundwork for future X-ray FEL based on HGHG. The upgraded HGHG FEL will operate at the 4th harmonic with the seed laser at either 800 nm or 400nm. The increase of the electron beam energy will be accomplished by installing a 5th linac cavity and two 45 MW klystrons. New HGHG modulator and dispersion sections vacuum chambers will be manufactured to accommodate new matching optics and 8th harmonic HGHG. The initial results of the DUV-FEL upgrade and other FEL and accelerator physics R&D opportunities will be discussed.

*L.H. Yu et al., Phy. Rev. Lett. 91, 074801-1 (2003). **W. Li et al., Phy. Rev. Lett. 92, 083002-1(2004).

 
RPAE058 NSLS-II Injection Concept 3408
 
  • T.V. Shaftan, A. Blednykh, S. Chouhan, E.D. Johnson, S.L. Kramer, S. Krinsky, J.B. Murphy, I.P. Pinayev, S. Pjerov, B. Podobedov, G. Rakowsky, J. Rose, T. Tanabe, J.-M. Wang, X.J. Wang, L.-H. Yu
    BNL, Upton, Long Island, New York
  
  Currently the facility upgrade project is under progress at the NSLS (Brookhaven National Laboratory). The goal of NSLS-II is a 3 GeV ultra-low emittance storage ring that will provide three orders of magnitude increase in brightness over the present NSLS X-ray beamlines. The low emittance of the high brightness ring lattice results in quite short lifetimes, which makes operation in top-off injection mode a necessity. The NSLS-II injection system must be able to provide an electron beam at the high repetition rate and with good injection efficiency. In this paper we present a concept of the NSLS-II injection system and discuss conditions and constraints for the injector design. Various injection system parameters are estimated from the point of view of SR user demand.  
RPAE059 Design of 3 GeV Booster for NSLS-II 3473
 
  • T.V. Shaftan, E.D. Johnson, J.B. Murphy, I.P. Pinayev, J. Rose, X.J. Wang
    BNL, Upton, Long Island, New York
  
  We present preliminary design of full energy booster for NSLS-II. In the paper we analyze single- and multi-bunch modes of the booster operations. The booster lattice consists of 24 TME cells with two dispersion suppressors. Initial design of the magnets, power supply specifications, Eddy current contribution to the booster chromaticity are discussed.  
RPAE056 NSLS II: The Future of the NSLS 3345
 
  • J.B. Murphy, J. Bengtsson, R. Biscardi, A. Blednykh, G.L. Carr, W.R. Casey, S. Chouhan, S.B. Dierker, E. Haas, R. Heese, S. Hulbert, E.D. Johnson, C.C. Kao, S.L. Kramer, S. Krinsky, I.P. Pinayev, S. Pjerov, B. Podobedov, G. Rakowsky, J. Rose, T.V. Shaftan, B. Sheehy, J. Skaritka, N.A. Towne, J.-M. Wang, X.J. Wang, L.-H. Yu
    BNL, Upton, Long Island, New York
  
  Funding: Under Contract with the United States Department of Energy Contract Number DE-AC02-98CH10886

The National Synchrotron Light Source at BNL was the first dedicated light source facility and it has now operated for more than 20 years. During this time the user community has grown to more than 2400 users annually. To insure that this vibrant user community has access to the highest quality photon beams, the NSLS is pursuing the design of a new ultra-high brightness (~10E21) electron storage ring, tailored to the 0.3-20 KeV photon energy range. We present our preliminary design and review the critical accelerator physics design issues.

 
RPAT068 Proposed Diagnostics for the NSLS-II 3760
 
  • I.P. Pinayev, S.L. Kramer, J. Rose, T.V. Shaftan
    BNL, Upton, Long Island, New York
  
  Funding: The U.S. Department of Energy under contract No. DE-AC02-98CH10886.

The National Synchrotron Light Source is performing R&D of a new 3 GeV electron storage ring to be used for the facility upgrade. To satisfy the demands for the brightness and stability of the future light source a state-of-the-art diagnostics system is a necessity. We present our preliminary design with focus on the requirements for instrumentation and technical solutions to achieve them.

 
FPAT051 A New Timing System for the Duke Booster and Storage Ring 3159
 
  • G.Y. Kurkin
    BINP SB RAS, Novosibirsk
  • S.M. Hartman, S. Mikhailov, Y.K. Wu
    DU/FEL, Durham, North Carolina
  • I.P. Pinayev
    BNL, Upton, Long Island, New York
  
  Funding: AFOSR MFEL grant number is F49620-001-0370, HIGS Upgrade DOE grant number is DE-FG02-01ER41175.

A dedicated booster synchrotron is being constructed at the Duke FEL Laboratory to provide full energy injection into the main electron storage ring. A new timing system has been developed to coordinate the injection of electron bunches from the linac to the booster, the ramping of energy in the booster, and extraction of bunches into the main ring. The timing system will allow the extraction of any bunch in the booster into any selected bucket in the main ring to provide top-off injection for any of the various operational bunch patterns of the main ring. A new master oscillator has also been developed for the RF system of the booster. The oscillator may be tuned independently or phase-locked to the master oscillator of the main ring. The issues of the soft phase locking process of the new master oscillator are discussed. The timing system and new oscillator have been fabricated and tested and are ready for operation.