NAPAC2019 - List of Keywords (alignment)

Paper	Title	Other Keywords	Page
MOPLM18	Design of the 2-Stage Laser Transport for the Low Energy RHIC Electron Cooling (LEReC) DC Photogun	laser, gun, electron, cathode	144
	P. Inacker, S. Bellavia, A.J. Curcio, A.V. Fedotov, W. Fischer, D.M. Gassner, J.P. Jamilkowski, P.K. Kankiya, D. Kayran, D. Lehn, R. Meier, T.A. Miller, M.G. Minty, S.K. Nayak, L.K. Nguyen, L. Smart, C.J. Spataro, A. Sukhanov, J.E. Tuozzolo, Z. Zhao BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The electron beam for the recently constructed Low Energy RHIC electron Cooler (LEReC) at Brookhaven National Laboratory is generated by a high-power fiber laser illuminating a photocathode. The pointing stability of the low-energy electron beam, which is crucial to maintain within acceptable limits given the long beam transport, is highly dependent on the center-of-mass (CoM) stability of the laser spot on the photocathode. For reasons of accessibility during operations, the laser itself is located outside the accelerator tunnel, leading to the need to propagate the laser beam 34 m via three laser tables to the photocathode. The challenges to achieving the required CoM stability of 10 microns on the photocathode thus requires mitigation of vibrations along the transport and of weather- and season-related environmental effects, while preserving accessibility and diagnostic capabilities with proactive design. After successful commissioning of the full transport in 2018/19, we report on our solutions to these design challenges. LEReC Photocathode DC Gun Beam Test Results - D. Kayran Conference: C18-04-29, p.TUPMF025 Commissioning of Electron Accelerator LEReC for Bunch Beam Cooling - D.Kayran, NAPAC19
	Poster MOPLM18 [1.970 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLM18
About •	paper received ※ 27 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPLO04	Progress in Time-Resolved MeV Transmission Electron Microscopy at UCLA	electron, quadrupole, cavity, detector	243
	P.E. Denham UCLA, Los Angeles, USA
	We describe here two new enhancements developed for the time-resolved microscope at the UCLA PEGASUS Lab based on the use of a radiofrequency photoinjector as an ultrafast electron source and permanent magnet quadrupoles as electron lenses. The first enhancement is a flexible optical column design including hybrid-style stronger focusing quadrupoles, yielding a 60% magnification increase, and a collimator to improve imaging contrast. This new optical system will have the ability to switch between real-space imaging and diffraction pattern imaging with variable magnification. The second enhancement is a high-frequency (X-band) cavity downstream from the (S-band) photoinjector to reduce the beam energy spread. These enhancements are crucial for improving contrast and image quality. In addition, a pulse-wire alignment method to fiducialize the quadrupole positions to better than 20-um precision is used to reduce the aberrations induced by misalignment and achieve spatial resolution at the 20 nm-level.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLO04
About •	paper received ※ 28 August 2019 paper accepted ※ 04 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYBB3	Final Design of the APS-Upgrade Storage Ring Vacuum System	vacuum, storage-ring, photon, extraction	315
	J.A. Carter, B. Billett, B. Brajuskovic, M.A. Lale, A. McElderry, O.K. Mulvany, J.R. Noonan, M.M. O’Neill, R.R. Swanson, K.J. Wakefield, D.R. Walters, G.E. Wiemerslage, J. Zientek ANL, Lemont, Illinois, USA
	Funding: Argonne National Laboratory’s work was supported by the U.S. Department of Energy, Office of Science under contract DE-AC02-06CH11357. The Advanced Photon Source Upgrade project is progressing from its final design phase into production for the future 6 GeV, 200 mA upgrade of the existing APS. The storage ring arc vacuum system will include over 2500 custom vacuum chambers ranging from 70 mm to 2.5 meters in length and typically feature a narrow 22 mm inner diameter aperture. The scope of NEG coatings was increased to 40% of the length along the e-beam path to ensure efficient conditioning and low pressure requirements can be met. The final design phase required advancing previous work to a procurement-ready level and to address local and system level challenges. Local challenges include designing thin-walled vacuum chambers with carefully controlled lengths and outer profiles and also mitigating significant radiation heat loads absorbed along vacuum chamber walls. System level challenges include planning for the complex machine assembly, networking components to utilities, managing the quality of upcoming procurements. This presentation will highlight the major design challenges and solutions for the storage ring vacuum system and also plans for production and installation.
	Slides TUYBB3 [10.852 MB]
	Poster TUYBB3 [5.028 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUYBB3
About •	paper received ※ 27 August 2019 paper accepted ※ 30 August 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLM08	Experimental Studies of Single Invariant Quasi-Integrable Nonlinear Optics at IOTA	octupole, experiment, optics, lattice	383
	N. Kuklev, Y.K. Kim University of Chicago, Chicago, Illinois, USA S. Nagaitsev, A.L. Romanov, A. Valishev Fermilab, Batavia, Illinois, USA
	Funding: Work supported by National Science Foundation award PHY-1549132, the Center for Bright Beams. Fermi Research Alliance operates Fermilab under Contract DE-AC02-07CH11359 with the US Dept. of Energy. The Integrable Optics Test Accelerator is a research electron and proton storage ring recently commissioned at the Fermilab Accelerator Science and Technology facility. Its research program is focused on testing novel techniques for improving beam stability and quality, notably the concept of non-linear integrable optics. In this paper, we report on run 1 results of experimental studies of a quasi-integrable transverse focusing system with one invariant of motion, a Henon-Heiles type system implemented with octupole magnets. Good agreement with simulations is demonstrated on key parameters of achievable tune spread, dynamic aperture, and invariant conservation. We also outline current simulation and hardware improvement efforts for run 2, planned for fall of 2019.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLM08
About •	paper received ※ 28 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLS02	APS Upgrade Insertion Device Vacuum Chamber Design	vacuum, storage-ring, photon, distributed	450
	J.E. Lerch, T.J. Bender, O.K. Mulvany, M.E. Szubert ANL, Lemont, Illinois, USA
	A straight section vacuum system (nominally 5.363 meters long) has been designed for the APS upgrade project. This vacuum system will be used in straight sections equipped with hybrid permanent magnet undulators (HPMU). The vacuum system assembly consists of the insertion device vacuum chamber (IDVC), the vacuum chamber distributed support, and the photon absorber. Numerous functional requirements constrained the IDVC design. These constraints included incorporation of the beam aperture transition into the end of the aluminium vacuum chamber extrusion (storage ring aperture to IDVC aperture), thin walls (~600 microns) surrounding the beam aperture to allow for as small a magnetic gap as possible, and complicated weld paths to ensure a continuous beam surface to minimize impedance. Additionally, extensive FEA and raytrace analysis were performed to ensure that the chamber would not fail due to structural or thermal perturbations.
	Poster TUPLS02 [3.816 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLS02
About •	paper received ※ 26 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLH01	Status of the Superconducting Undulator Program at the Advanced Photon Source	undulator, operation, storage-ring, photon	490
	M. Kasa, E.R. Anliker, J.D. Fuerst, E. Gluskin, Q.B. Hasse, Y. Ivanyushenkov, W.G. Jansma, I. Kesgin, Y. Shiroyanagi ANL, Lemont, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. Since 2013 there has been at least one superconducting undulator (SCU) in operation at the Advanced Photon Source (APS), currently there are two planar SCUs and one helical SCU. The combined operational experience of SCUs at the APS is more than 11 years and counting. Through all these years, APS SCUs operated with the predicted or better than predicted radiation performance and with 99% availability. With this demonstrated reliability and experimentally confirmed spectral performance, the APS upgrade project is planning on leveraging the advantages of SCU technology. The present planar SCUs are comprised of ~1.1-m-long magnets, each operated within a 2-m-long cryostat, while the planar SCUs for the upgrade will have two ~1.8-m-long magnets operating within a 5-m-long cryostat. Progress is also being made in other areas of SCU development with work on an arbitrary polarizing SCU, referred to as SCAPE, and a planar SCU wound with Nb₃Sn superconductor. A Nb₃Sn SCU is being designed with two 1.3-m-long magnets within a 5-m-long cryostat, and installation is planned for 2021. Also under development are the alignment and magnetic measurement systems for use with the 5-m-long cryostat.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH01
About •	paper received ※ 26 August 2019 paper accepted ※ 02 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPLM18

Design of the 2-Stage Laser Transport for the Low Energy RHIC Electron Cooling (LEReC) DC Photogun

laser, gun, electron, cathode

144

P. Inacker, S. Bellavia, A.J. Curcio, A.V. Fedotov, W. Fischer, D.M. Gassner, J.P. Jamilkowski, P.K. Kankiya, D. Kayran, D. Lehn, R. Meier, T.A. Miller, M.G. Minty, S.K. Nayak, L.K. Nguyen, L. Smart, C.J. Spataro, A. Sukhanov, J.E. Tuozzolo, Z. Zhao
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The electron beam for the recently constructed Low Energy RHIC electron Cooler (LEReC) at Brookhaven National Laboratory is generated by a high-power fiber laser illuminating a photocathode. The pointing stability of the low-energy electron beam, which is crucial to maintain within acceptable limits given the long beam transport, is highly dependent on the center-of-mass (CoM) stability of the laser spot on the photocathode. For reasons of accessibility during operations, the laser itself is located outside the accelerator tunnel, leading to the need to propagate the laser beam 34 m via three laser tables to the photocathode. The challenges to achieving the required CoM stability of 10 microns on the photocathode thus requires mitigation of vibrations along the transport and of weather- and season-related environmental effects, while preserving accessibility and diagnostic capabilities with proactive design. After successful commissioning of the full transport in 2018/19, we report on our solutions to these design challenges.
LEReC Photocathode DC Gun Beam Test Results - D. Kayran Conference: C18-04-29, p.TUPMF025
Commissioning of Electron Accelerator LEReC for Bunch Beam Cooling - D.Kayran, NAPAC19

Poster MOPLM18 [1.970 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLM18

About •

paper received ※ 27 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPLO04

Progress in Time-Resolved MeV Transmission Electron Microscopy at UCLA

electron, quadrupole, cavity, detector

243

P.E. Denham
UCLA, Los Angeles, USA

We describe here two new enhancements developed for the time-resolved microscope at the UCLA PEGASUS Lab based on the use of a radiofrequency photoinjector as an ultrafast electron source and permanent magnet quadrupoles as electron lenses. The first enhancement is a flexible optical column design including hybrid-style stronger focusing quadrupoles, yielding a 60% magnification increase, and a collimator to improve imaging contrast. This new optical system will have the ability to switch between real-space imaging and diffraction pattern imaging with variable magnification. The second enhancement is a high-frequency (X-band) cavity downstream from the (S-band) photoinjector to reduce the beam energy spread. These enhancements are crucial for improving contrast and image quality. In addition, a pulse-wire alignment method to fiducialize the quadrupole positions to better than 20-um precision is used to reduce the aberrations induced by misalignment and achieve spatial resolution at the 20 nm-level.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLO04

About •

paper received ※ 28 August 2019 paper accepted ※ 04 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYBB3

Final Design of the APS-Upgrade Storage Ring Vacuum System

vacuum, storage-ring, photon, extraction

315

J.A. Carter, B. Billett, B. Brajuskovic, M.A. Lale, A. McElderry, O.K. Mulvany, J.R. Noonan, M.M. O’Neill, R.R. Swanson, K.J. Wakefield, D.R. Walters, G.E. Wiemerslage, J. Zientek
ANL, Lemont, Illinois, USA

Funding: Argonne National Laboratory’s work was supported by the U.S. Department of Energy, Office of Science under contract DE-AC02-06CH11357.
The Advanced Photon Source Upgrade project is progressing from its final design phase into production for the future 6 GeV, 200 mA upgrade of the existing APS. The storage ring arc vacuum system will include over 2500 custom vacuum chambers ranging from 70 mm to 2.5 meters in length and typically feature a narrow 22 mm inner diameter aperture. The scope of NEG coatings was increased to 40% of the length along the e-beam path to ensure efficient conditioning and low pressure requirements can be met. The final design phase required advancing previous work to a procurement-ready level and to address local and system level challenges. Local challenges include designing thin-walled vacuum chambers with carefully controlled lengths and outer profiles and also mitigating significant radiation heat loads absorbed along vacuum chamber walls. System level challenges include planning for the complex machine assembly, networking components to utilities, managing the quality of upcoming procurements. This presentation will highlight the major design challenges and solutions for the storage ring vacuum system and also plans for production and installation.

Slides TUYBB3 [10.852 MB]

Poster TUYBB3 [5.028 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUYBB3

About •

paper received ※ 27 August 2019 paper accepted ※ 30 August 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLM08

Experimental Studies of Single Invariant Quasi-Integrable Nonlinear Optics at IOTA

octupole, experiment, optics, lattice

383

N. Kuklev, Y.K. Kim
University of Chicago, Chicago, Illinois, USA
S. Nagaitsev, A.L. Romanov, A. Valishev
Fermilab, Batavia, Illinois, USA

Funding: Work supported by National Science Foundation award PHY-1549132, the Center for Bright Beams. Fermi Research Alliance operates Fermilab under Contract DE-AC02-07CH11359 with the US Dept. of Energy.
The Integrable Optics Test Accelerator is a research electron and proton storage ring recently commissioned at the Fermilab Accelerator Science and Technology facility. Its research program is focused on testing novel techniques for improving beam stability and quality, notably the concept of non-linear integrable optics. In this paper, we report on run 1 results of experimental studies of a quasi-integrable transverse focusing system with one invariant of motion, a Henon-Heiles type system implemented with octupole magnets. Good agreement with simulations is demonstrated on key parameters of achievable tune spread, dynamic aperture, and invariant conservation. We also outline current simulation and hardware improvement efforts for run 2, planned for fall of 2019.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLM08

About •

paper received ※ 28 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLS02

APS Upgrade Insertion Device Vacuum Chamber Design

vacuum, storage-ring, photon, distributed

450

J.E. Lerch, T.J. Bender, O.K. Mulvany, M.E. Szubert
ANL, Lemont, Illinois, USA

A straight section vacuum system (nominally 5.363 meters long) has been designed for the APS upgrade project. This vacuum system will be used in straight sections equipped with hybrid permanent magnet undulators (HPMU). The vacuum system assembly consists of the insertion device vacuum chamber (IDVC), the vacuum chamber distributed support, and the photon absorber. Numerous functional requirements constrained the IDVC design. These constraints included incorporation of the beam aperture transition into the end of the aluminium vacuum chamber extrusion (storage ring aperture to IDVC aperture), thin walls (~600 microns) surrounding the beam aperture to allow for as small a magnetic gap as possible, and complicated weld paths to ensure a continuous beam surface to minimize impedance. Additionally, extensive FEA and raytrace analysis were performed to ensure that the chamber would not fail due to structural or thermal perturbations.

Poster TUPLS02 [3.816 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLS02

About •

paper received ※ 26 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLH01

Status of the Superconducting Undulator Program at the Advanced Photon Source

undulator, operation, storage-ring, photon

490

M. Kasa, E.R. Anliker, J.D. Fuerst, E. Gluskin, Q.B. Hasse, Y. Ivanyushenkov, W.G. Jansma, I. Kesgin, Y. Shiroyanagi
ANL, Lemont, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
Since 2013 there has been at least one superconducting undulator (SCU) in operation at the Advanced Photon Source (APS), currently there are two planar SCUs and one helical SCU. The combined operational experience of SCUs at the APS is more than 11 years and counting. Through all these years, APS SCUs operated with the predicted or better than predicted radiation performance and with 99% availability. With this demonstrated reliability and experimentally confirmed spectral performance, the APS upgrade project is planning on leveraging the advantages of SCU technology. The present planar SCUs are comprised of ~1.1-m-long magnets, each operated within a 2-m-long cryostat, while the planar SCUs for the upgrade will have two ~1.8-m-long magnets operating within a 5-m-long cryostat. Progress is also being made in other areas of SCU development with work on an arbitrary polarizing SCU, referred to as SCAPE, and a planar SCU wound with Nb₃Sn superconductor. A Nb₃Sn SCU is being designed with two 1.3-m-long magnets within a 5-m-long cryostat, and installation is planned for 2021. Also under development are the alignment and magnetic measurement systems for use with the 5-m-long cryostat.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH01

About •

paper received ※ 26 August 2019 paper accepted ※ 02 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)