MEDSI2023 - List of Keywords (insertion-device)

Paper	Title	Other Keywords	Page
WEPPP015	Progress of Front Ends at HEPS	photon, radiation, synchrotron, storage-ring	175
	H. Shi, P. Luo, Y.X. Ma, Y. Tan, H.Y. Wang IHEP, Beijing, People’s Republic of China
	High Energy Photon Source (HEPS) is a 6GeV synchrotron radiation facility building in Huairou, with a storage ring perimeter of 1390.6m and 41 straight sections. In phase I, 15 front ends will be installed, including 14 insertion device front ends and 1 bending magnet front end. These front ends are divided into three types: the Undulator front end, the Wiggler front end, and the BM front end. The U-type front end will receive 766W/mrad² of peak power density and 25kW of the total power. The design of the W-type front end is based on compatibility with various insertion devices, including udulators and wigglers. In this paper, the designs and the progress of HEPS front ends are presented.
	Poster WEPPP015 [2.147 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEPPP015
About •	Received ※ 01 November 2023 — Revised ※ 04 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 08 January 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP052	Design and Development of Coated Chamber for In-Air Insertion Devices	vacuum, synchrotron, undulator, synchrotron-radiation	352
	P.C. Wang, Y. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China H. Dong, Y.S. Ma, Y.G. Wang, L. Zhang IHEP, Beijing, People’s Republic of China J.M. Liu, S.M. Liu, X.Y. Sun DNSC, Dongguan, People’s Republic of China B. Tan Institute of High Energy Physics, CAS, Guangdong, People’s Republic of China B.L. Zhu IHEP CSNS, Guangdong Province, People’s Republic of China
	The insertion devices ¿ID¿is an important guarantee for further improving the performance of the light source to meet the needs of different users. For in-air ID (undulator, wiggler, etc.), the magnetic structure is in the air, and the vacuum chamber is in the middle of the magnetic structure to ensure the normal operation of the beam. In order to increase the magnetic field strength, the magnetic gap is generally relatively small. Factors such as small setting space, high precision, and low conductance all pose challenges to the design and processing of vacuum chamber. This paper introduces the development process of the vacuum chamber prototype of the coating type ID for the China ’s first diffraction-limited light source HEPS. The simultaneous analysis and vacuum pressure distribution calculation of the ID are carried out, and the NEG coating scheme is proposed as an more economical means to obtain ultra-high vacuum. The prototype NEG coating progress is introduced.
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP052
About •	Received ※ 02 November 2023 — Revised ※ 10 November 2023 — Accepted ※ 12 November 2023 — Issued ※ 18 July 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEPPP015

Progress of Front Ends at HEPS

photon, radiation, synchrotron, storage-ring

175

H. Shi, P. Luo, Y.X. Ma, Y. Tan, H.Y. Wang
IHEP, Beijing, People’s Republic of China

High Energy Photon Source (HEPS) is a 6GeV synchrotron radiation facility building in Huairou, with a storage ring perimeter of 1390.6m and 41 straight sections. In phase I, 15 front ends will be installed, including 14 insertion device front ends and 1 bending magnet front end. These front ends are divided into three types: the Undulator front end, the Wiggler front end, and the BM front end. The U-type front end will receive 766W/mrad² of peak power density and 25kW of the total power. The design of the W-type front end is based on compatibility with various insertion devices, including udulators and wigglers. In this paper, the designs and the progress of HEPS front ends are presented.

Poster WEPPP015 [2.147 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEPPP015

About •

Received ※ 01 November 2023 — Revised ※ 04 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 08 January 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP052

Design and Development of Coated Chamber for In-Air Insertion Devices

vacuum, synchrotron, undulator, synchrotron-radiation

352

P.C. Wang, Y. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China
H. Dong, Y.S. Ma, Y.G. Wang, L. Zhang
IHEP, Beijing, People’s Republic of China
J.M. Liu, S.M. Liu, X.Y. Sun
DNSC, Dongguan, People’s Republic of China
B. Tan
Institute of High Energy Physics, CAS, Guangdong, People’s Republic of China
B.L. Zhu
IHEP CSNS, Guangdong Province, People’s Republic of China

The insertion devices ¿ID¿is an important guarantee for further improving the performance of the light source to meet the needs of different users. For in-air ID (undulator, wiggler, etc.), the magnetic structure is in the air, and the vacuum chamber is in the middle of the magnetic structure to ensure the normal operation of the beam. In order to increase the magnetic field strength, the magnetic gap is generally relatively small. Factors such as small setting space, high precision, and low conductance all pose challenges to the design and processing of vacuum chamber. This paper introduces the development process of the vacuum chamber prototype of the coating type ID for the China ’s first diffraction-limited light source HEPS. The simultaneous analysis and vacuum pressure distribution calculation of the ID are carried out, and the NEG coating scheme is proposed as an more economical means to obtain ultra-high vacuum. The prototype NEG coating progress is introduced.

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP052

About •

Received ※ 02 November 2023 — Revised ※ 10 November 2023 — Accepted ※ 12 November 2023 — Issued ※ 18 July 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)