LINAC2016 - List of Authors (Kim, H.J.)

Paper	Title	Page
MOOP02	Current Status of Superconducting Linac for the Rare Isotope Science Project	41
MOPLR074	use link to see paper's listing under its alternate paper code
	H.J. Kim, I.S. Hong, H.C. Jung, W.K. Kim, Y.H. Kim, Y. Kim, B.-S. Park, I. Shin IBS, Daejeon, Republic of Korea
	The RISP (Rare Isotope Science Project) has been proposed as a multi-purpose accelerator facility for providing beams of exotic rare isotopes of various energies. It can deliver ions from proton to uranium. Proton and uranium ions are accelerated upto 600 MeV and 200 MeV/u respectively. The facility consists of three superconducting linacs of which superconducting cavities are independently phased. Requirement of the linac design is especially high for acceleration of multiple charge beams. We present the RISP linac design, the prototyping of superconducting cavity and cryomodule.
	Slides MOOP02 [5.566 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOOP02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR028	Alternative Design for the RISP Pre-Stripper Linac	531
	B. Mustapha, Z.A. Conway, M.P. Kelly, P.N. Ostroumov, A.S. Plastun ANL, Argonne, Illinois, USA J.-H. Jang, H. Jin, H.J. Kim, J.-W. Kim IBS, Daejeon, Republic of Korea
	Funding: This work was supported by the work-for-other grant WFO8550H titled "Pre-conceptual design, cost and schedule estimate of the 18.5 MeV/u Pre-stripper linac for the RISP/IBS" In a collaborative effort between Argonne's Linac Development Group and the RISP project team at the Korean Institute for Basic Science, we have developed an alternative design for the pre-stripper section of the RISP driver linac. The proposed linac design takes advantage of the recent accelerator developments at Argonne, namely the ATLAS upgrades and the Fermilab PIP-II HWR Cryomodule. In particular, the state-of-the-art performance of QWRs and HWRs, the integrated steering correctors and clean BPMs for a compact cryomodule design. To simplify the design and avoid frequency transitions, we used two types of QWRs at 81.25 MHz. The QWRs were optimized for β ~ 0.05 and ~ 0.11 respectively. Nine cryomodules are required to reach the stripping energy of 18.5 MeV/u. Following the lattice design optimization, end-to-end beam dynamics simulations including all sources of machine errors were performed. The results showed that the design is tolerant to errors with no beam losses observed for nominal errors. However, the robustness of the design could be further improved by a modified RFQ design, better optimized with the multi-harmonic buncher located upstream. This could lead to a significant reduction in the longitudinal beam emittance, offering much easier beam tuning and more tolerance to errors. The proposed design and the simulation results will be presented and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR028
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOOP02

Current Status of Superconducting Linac for the Rare Isotope Science Project

41

MOPLR074

use link to see paper's listing under its alternate paper code

H.J. Kim, I.S. Hong, H.C. Jung, W.K. Kim, Y.H. Kim, Y. Kim, B.-S. Park, I. Shin
IBS, Daejeon, Republic of Korea

The RISP (Rare Isotope Science Project) has been proposed as a multi-purpose accelerator facility for providing beams of exotic rare isotopes of various energies. It can deliver ions from proton to uranium. Proton and uranium ions are accelerated upto 600 MeV and 200 MeV/u respectively. The facility consists of three superconducting linacs of which superconducting cavities are independently phased. Requirement of the linac design is especially high for acceleration of multiple charge beams. We present the RISP linac design, the prototyping of superconducting cavity and cryomodule.

Slides MOOP02 [5.566 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOOP02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLR028

Alternative Design for the RISP Pre-Stripper Linac

531

B. Mustapha, Z.A. Conway, M.P. Kelly, P.N. Ostroumov, A.S. Plastun
ANL, Argonne, Illinois, USA
J.-H. Jang, H. Jin, H.J. Kim, J.-W. Kim
IBS, Daejeon, Republic of Korea

Funding: This work was supported by the work-for-other grant WFO8550H titled "Pre-conceptual design, cost and schedule estimate of the 18.5 MeV/u Pre-stripper linac for the RISP/IBS"
In a collaborative effort between Argonne's Linac Development Group and the RISP project team at the Korean Institute for Basic Science, we have developed an alternative design for the pre-stripper section of the RISP driver linac. The proposed linac design takes advantage of the recent accelerator developments at Argonne, namely the ATLAS upgrades and the Fermilab PIP-II HWR Cryomodule. In particular, the state-of-the-art performance of QWRs and HWRs, the integrated steering correctors and clean BPMs for a compact cryomodule design. To simplify the design and avoid frequency transitions, we used two types of QWRs at 81.25 MHz. The QWRs were optimized for β ~ 0.05 and ~ 0.11 respectively. Nine cryomodules are required to reach the stripping energy of 18.5 MeV/u. Following the lattice design optimization, end-to-end beam dynamics simulations including all sources of machine errors were performed. The results showed that the design is tolerant to errors with no beam losses observed for nominal errors. However, the robustness of the design could be further improved by a modified RFQ design, better optimized with the multi-harmonic buncher located upstream. This could lead to a significant reduction in the longitudinal beam emittance, offering much easier beam tuning and more tolerance to errors. The proposed design and the simulation results will be presented and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPLR028

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)