JACoW logo

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.


RIS citation export for TUPLR028: Alternative Design for the RISP Pre-Stripper Linac

TY - CONF
AU - Mustapha, B.
AU - Conway, Z.A.
AU - Jang, J.-H.
AU - Jin, H.
AU - Kelly, M.P.
AU - Kim, H.J.
AU - Kim, J.-W.
AU - Ostroumov, P.N.
AU - Plastun, A.S.
ED - Yamazaki, Yoshishige
ED - Facco, Alberto
ED - McCausey, Amy
ED - Schaa, Volker RW
TI - Alternative Design for the RISP Pre-Stripper Linac
J2 - Proc. of LINAC2016, East Lansing, MI, USA, 25-30 September 2016
C1 - East Lansing, MI, USA
T2 - Linear Accelerator Conference
T3 - 28
LA - english
AB - In a collaborative effort between Argonne's Linac Development Group and the RISP project team at the Korean Institute for Basic Science, we have developed an alternative design for the pre-stripper section of the RISP driver linac. The proposed linac design takes advantage of the recent accelerator developments at Argonne, namely the ATLAS upgrades and the Fermilab PIP-II HWR Cryomodule. In particular, the state-of-the-art performance of QWRs and HWRs, the integrated steering correctors and clean BPMs for a compact cryomodule design. To simplify the design and avoid frequency transitions, we used two types of QWRs at 81.25 MHz. The QWRs were optimized for β ~ 0.05 and ~ 0.11 respectively. Nine cryomodules are required to reach the stripping energy of 18.5 MeV/u. Following the lattice design optimization, end-to-end beam dynamics simulations including all sources of machine errors were performed. The results showed that the design is tolerant to errors with no beam losses observed for nominal errors. However, the robustness of the design could be further improved by a modified RFQ design, better optimized with the multi-harmonic buncher located upstream. This could lead to a significant reduction in the longitudinal beam emittance, offering much easier beam tuning and more tolerance to errors. The proposed design and the simulation results will be presented and discussed.
PB - JACoW
CP - Geneva, Switzerland
SP - 531
EP - 534
KW - linac
KW - cryomodule
KW - simulation
KW - solenoid
KW - cavity
DA - 2017/05
PY - 2017
SN - 978-3-95450-169-4
DO - 10.18429/JACoW-LINAC2016-TUPLR028
UR - http://jacow.org/linac2016/papers/tuplr028.pdf
ER -