IPAC2021 - List of Authors (Solyak, N.)

Paper	Title	Page
MOPAB190	An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade	643
	D.V. Neuffer, S.A. Belomestnykh, M. Checchin, D.E. Johnson, S. Posen, E. Pozdeyev, V.S. Pronskikh, N. Solyak, V.P. Yakovlev Fermilab, Batavia, Illinois, USA
	Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. Increasing the Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Previously, rapid-cycling synchrotron (RCS) and Linac solutions were considered for this purpose. In this paper, we consider the Linac version that produces 8 GeV H⁻ beam for injection into the Recycler Ring (RR) or Main Injector (MI). The Linac takes ~1 GeV beam from the PIP-II Linac and accelerates it to ~2 GeV in a cw SRF linac, followed by a ~2-8 GeV pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. The linac configuration and beam dynamics requirements are presented. Injection options are discussed. Research needed to implement the Booster replacement is described.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB190
About •	paper received ※ 15 May 2021 paper accepted ※ 28 May 2021 issue date ※ 10 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB333	Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification	2279
	G.V. Eremeev, D.J. Bice, C. Boffo, S.K. Chandrasekaran, S. Cheban, F. Furuta, I.V. Gonin, C.J. Grimm, S. Kazakov, T.N. Khabiboulline, A. Lunin, M. Martinello, N. Nigam, J.P. Ozelis, Y.M. Pischalnikov, K.S. Premo, O.V. Prokofiev, O.V. Pronitchev, G.V. Romanov, N. Solyak, A.I. Sukhanov, G. Wu Fermilab, Batavia, Illinois, USA M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava RRCAT, Indore (M.P.), India P. Bhattacharyya, S. Ghosh, S. Seth VECC, Kolkata, India R. Kumar BARC, Mumbai, India J. Lewis, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom C. Pagani, R. Paparella INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy T. Reid ANL, Lemont, Illinois, USA A.D. Shabalina STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. Low-beta and high-beta sections of PIP-II linac will use nine low-beta cryomodules with four cavities each and four high-beta cryomodules with six cavities each. These cavities will be produced and qualified in collaboration between Fermilab and the international partner labs. Prior to their installation into prototype cryomodules, several dressed cavities, which include jacketed cavities, high power couplers, and tuners, will be qualified in STC horizontal test bed at Fermilab. After qualification of bare β = 0.9 cavities at Fermilab, several pre-production β = 0.92 and β = 0.61 cavities have been and are being fabricated and qualified. Procurements have also been started for high power couplers and tuners. In this contribution we present the current status of prototype dressed cavity qualification for PIP-II.
	Poster TUPAB333 [6.247 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB333
About •	paper received ※ 23 May 2021 paper accepted ※ 19 July 2021 issue date ※ 19 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB156	Built-in Thermionic Electron Source for an SRF Linacs	4062
	I.V. Gonin, S. Kazakov, R.D. Kephart, T.N. Khabiboulline, T.H. Nicol, N. Solyak, J.C.T. Thangaraj, V.P. Yakovlev Fermilab, Batavia, Illinois, USA
	The design of a thermionic electron source connected directly to a superconducting cavity, the key part of an SRF gun, is described. The results of beam dynamics optimization are presented which allow lack of beam current intercepting in the superconducting cavity. The electron source concept is presented including the cathode-grid assembly, thermal insulation of the cathode from the cavity, and the gun resonator design. The cavity thermal load caused by the gun is analyzed including the static heat load, black body radiation, backward electron heating, etc.
	Poster THPAB156 [0.670 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB156
About •	paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 27 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade

643

D.V. Neuffer, S.A. Belomestnykh, M. Checchin, D.E. Johnson, S. Posen, E. Pozdeyev, V.S. Pronskikh, N. Solyak, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
Increasing the Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8 GeV Booster by a higher intensity alternative. Previously, rapid-cycling synchrotron (RCS) and Linac solutions were considered for this purpose. In this paper, we consider the Linac version that produces 8 GeV H⁻ beam for injection into the Recycler Ring (RR) or Main Injector (MI). The Linac takes ~1 GeV beam from the PIP-II Linac and accelerates it to ~2 GeV in a cw SRF linac, followed by a ~2-8 GeV pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. The linac configuration and beam dynamics requirements are presented. Injection options are discussed. Research needed to implement the Booster replacement is described.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB190

About •

paper received ※ 15 May 2021 paper accepted ※ 28 May 2021 issue date ※ 10 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB333

Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification

2279

G.V. Eremeev, D.J. Bice, C. Boffo, S.K. Chandrasekaran, S. Cheban, F. Furuta, I.V. Gonin, C.J. Grimm, S. Kazakov, T.N. Khabiboulline, A. Lunin, M. Martinello, N. Nigam, J.P. Ozelis, Y.M. Pischalnikov, K.S. Premo, O.V. Prokofiev, O.V. Pronitchev, G.V. Romanov, N. Solyak, A.I. Sukhanov, G. Wu
Fermilab, Batavia, Illinois, USA
M. Bagre, V. Jain, A. Puntambekar, S. Raghvendra, P. Shrivastava
RRCAT, Indore (M.P.), India
P. Bhattacharyya, S. Ghosh, S. Seth
VECC, Kolkata, India
R. Kumar
BARC, Mumbai, India
J. Lewis, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
C. Pagani, R. Paparella
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy
T. Reid
ANL, Lemont, Illinois, USA
A.D. Shabalina
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
Low-beta and high-beta sections of PIP-II linac will use nine low-beta cryomodules with four cavities each and four high-beta cryomodules with six cavities each. These cavities will be produced and qualified in collaboration between Fermilab and the international partner labs. Prior to their installation into prototype cryomodules, several dressed cavities, which include jacketed cavities, high power couplers, and tuners, will be qualified in STC horizontal test bed at Fermilab. After qualification of bare β = 0.9 cavities at Fermilab, several pre-production β = 0.92 and β = 0.61 cavities have been and are being fabricated and qualified. Procurements have also been started for high power couplers and tuners. In this contribution we present the current status of prototype dressed cavity qualification for PIP-II.

Poster TUPAB333 [6.247 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB333

About •

paper received ※ 23 May 2021 paper accepted ※ 19 July 2021 issue date ※ 19 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB156

Built-in Thermionic Electron Source for an SRF Linacs

4062

I.V. Gonin, S. Kazakov, R.D. Kephart, T.N. Khabiboulline, T.H. Nicol, N. Solyak, J.C.T. Thangaraj, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA

The design of a thermionic electron source connected directly to a superconducting cavity, the key part of an SRF gun, is described. The results of beam dynamics optimization are presented which allow lack of beam current intercepting in the superconducting cavity. The electron source concept is presented including the cathode-grid assembly, thermal insulation of the cathode from the cavity, and the gun resonator design. The cavity thermal load caused by the gun is analyzed including the static heat load, black body radiation, backward electron heating, etc.

Poster THPAB156 [0.670 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB156

About •

paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 27 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)