IPAC2021 - List of Authors (Podobedov, B.)

Paper	Title	Page
MOPAB039	Amplitude-Dependent Shift of Betatron Tunes and Its Relation to Long-Term Circumference Variations at NSLS-II	175
	L.H. Yu, G. Bassi, Y. Hidaka, B. Podobedov, V.V. Smaluk, G.M. Wang, X. Yang BNL, Upton, New York, USA
	The comparison of amplitude tune dependence measured for NSLSII lattices with models indicated the large change of amplitude tune dependence over time apparently can not be solely explained by magnets variation or beta function changes, but it seems can be explained by energy changes. On the other hand, the energy change required by fitting with the amplitude tune dependence change is too large to be explained by the RF frequency change and the change of the sum of correctors in the period of the measurements. To explain this apparent contradiction, our analysis shows the long term storage ring circumference change can explain the apparent energy change. Our data indeed shows a seasonal change of the amplitude tune dependence over long term observation. This clearly also indicated a relation to long term closed orbit drift. Hence the current work indicates a new strategy to study how to use amplitude tune dependence as a guideline to analyze long term lattice parameter shifts and closed orbit drift, and improve the orbit and machine performance stability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB039
About •	paper received ※ 09 May 2021 paper accepted ※ 26 May 2021 issue date ※ 26 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB121	Progress Towards Soft X-Ray Beam Position Monitor Development	438
	B. Podobedov, C. Eng, S. Hulbert, C. Mazzoli BNL, Upton, New York, USA D. Donetski, K. Kucharczyk, J. Liu, R. Lutchman Stony Brook University, Stony Brook, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. X-ray beam position monitors (BPMs) are instrumental for storage ring light sources, where they reliably provide positional measurements of high-power beams in hard X-ray beamlines. However, despite a growing need, coming especially from coherent soft X-ray beamlines, non-invasive soft X-ray BPMs have not been demonstrated yet. We are presently working on a funded R&D proposal to develop a non-invasive soft X-ray BPM with micron-scale resolution for high-power white beams. In our approach, multi-pixel GaAs detector arrays are placed into the beam halo and beam position is inferred from the pixel photocurrent levels. Presently, the first detector array prototypes have been manufactured and are being prepared for low-power beam tests. The mechanical design of a BPM test-stand, which will be installed in the 23-ID canted soft X-ray undulator beamline at NSLS-II, is well under way. In addition, we are developing new algorithms of beam position calculation which take full advantage of extended multi-pixel detector arrays. In this paper we will review our design choices and discuss recent progress.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB121
About •	paper received ※ 03 June 2021 paper accepted ※ 13 July 2021 issue date ※ 28 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB005	Design Status Update of the Electron-Ion Collider	2585
	C. Montag, E.C. Aschenauer, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, Z.A. Conway, K.A. Drees, A.V. Fedotov, W. Fischer, C. Folz, D.M. Gassner, X. Gu, R.C. Gupta, Y. Hao, A. Hershcovitch, C. Hetzel, D. Holmes, H. Huang, W.A. Jackson, J. Kewisch, Y. Li, C. Liu, H. Lovelace III, Y. Luo, M. Mapes, D. Marx, G.T. McIntyre, F. Méot, M.G. Minty, S.K. Nayak, R.B. Palmer, B. Parker, S. Peggs, B. Podobedov, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, S. Verdú-Andrés, E. Wang, D. Weiss, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang BNL, Upton, New York, USA S.V. Benson, J.M. Grames, F. Lin, T.J. Michalski, V.S. Morozov, E.A. Nissen, J.P. Preble, R.A. Rimmer, T. Satogata, A. Seryi, M. Wiseman, W. Wittmer, Y. Zhang JLab, Newport News, Virginia, USA Y. Cai, Y.M. Nosochkov, G. Stupakov, M.K. Sullivan SLAC, Menlo Park, California, USA K.E. Deitrick, C.M. Gulliford, G.H. Hoffstaetter, J.E. Unger Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA E. Gianfelice-Wendt Fermilab, Batavia, Illinois, USA T. Satogata ODU, Norfolk, Virginia, USA D. Xu FRIB, East Lansing, Michigan, USA
	Funding: Work supported by BSA, LLC under Contract No. DE-SC0012704, by JSA, LLC under Contract No. DE-AC05-06OR23177, and by SLAC under Contract No. DE-AC02-76SF00515 with the U.S. Department of Energy. The design of the electron-ion collider EIC to be constructed at Brookhaven National Laboratory has been continuously evolving towards a realistic and robust design that meets all the requirements set forth by the nuclear physics community in the White Paper. Over the past year activities have been focused on maturing the design, and on developing alternatives to mitigate risk. These include improvements of the interaction region design as well as modifications of the hadron ring vacuum system to accommodate the high average and peak beam currents. Beam dynamics studies have been performed to determine and optimize the dynamic aperture in the two collider rings and the beam-beam performance. We will present the EIC design with a focus on recent developments.
	Poster WEPAB005 [2.095 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB005
About •	paper received ※ 14 May 2021 paper accepted ※ 22 June 2021 issue date ※ 16 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXB04	Non-Invasive Dispersion Function Measurement during Light Source Operations	3720
	B. Podobedov, Y. Hidaka BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. We implemented a completely parasitic measurement of lattice dispersion functions in both horizontal and vertical planes, which is fully compatible with light source user operations. The measurement is performed by applying principal component analysis and adaptive filtering to very small residual orbit noise components introduced by the RF system and detected in the beam orbit data, sampled at 10 kHz. No changes in RF frequency are required. The measurement, performed once a minute, was shown to be robust and immune to changes in the beam current, residual orbit noise amplitude and frequency content as well as other factors. At low current it was shown to provide similar accuracy to the traditional method (which shifts the 500 MHz RF frequency by ±500 Hz). In this paper we will explain our measurement technique and present typical dispersion function stability achieved during NSLS-II operations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THXB04
About •	paper received ※ 26 June 2021 paper accepted ※ 13 July 2021 issue date ※ 23 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB254	Limiting Coherent Longitudinal Beam Oscillations in the EIC Electron Storage Ring	2046
	B. Podobedov Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA M. Blaskiewicz BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. We study coherent longitudinal beam oscillations in the EIC electron storage ring (ESR). We show that to avoid unacceptable hadron emittance growth due to finite crossing angle, the amplitude of these oscillations needs to be limited to a fraction of a millimeter. Using an analytical model we estimate the amplitude of these oscillations under the two scenarios: 1) the beam is passively stable and the oscillations are driven by RF phase noise only; 2) a coupled-bunch instability, presently expected in the ESR, is damped by a longitudinal feedback system. We show that, for the 2nd scenario, comfortable specifications for RF phase noise and feedback sensor noise will be sufficient to maintain the oscillation amplitude within the required limits.
	Poster TUPAB254 [1.347 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB254
About •	paper received ※ 12 May 2021 paper accepted ※ 18 June 2021 issue date ※ 26 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB238	An Overview of the Collective Effects and Impedance Calculation for the EIC	4266
	A. Blednykh, D.M. Gassner, B. Podobedov, S. Verdú-Andrés Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA M. Blaskiewicz, C. Hetzel, B. Lepore, V.H. Ranjbar, M.P. Sangroula, P. Thieberger, G. Wang, Q. Wu BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy. A new high-luminosity Electron-Ion Collider (EIC) is being designed at Brookhaven National Laboratory (BNL). Stable operation of the electron beam at an average current of 2.5A within 1100 bunches with a 7mm bunch length is one of the challenging tasks in achieving an electron-proton luminosity of 1033-1034 cm^-2 ses⁻¹ range. Beam induced heating, short-range and long-range wakefield analysis is discussed for some of the vacuum components of the electron storage ring (ESR), the hadron storage ring (HSR), and the rapid cycling synchrotron (RCS) and as well as the impact of the collective effects on the beam stability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB238
About •	paper received ※ 15 May 2021 paper accepted ※ 24 June 2021 issue date ※ 29 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Amplitude-Dependent Shift of Betatron Tunes and Its Relation to Long-Term Circumference Variations at NSLS-II

175

L.H. Yu, G. Bassi, Y. Hidaka, B. Podobedov, V.V. Smaluk, G.M. Wang, X. Yang
BNL, Upton, New York, USA

The comparison of amplitude tune dependence measured for NSLSII lattices with models indicated the large change of amplitude tune dependence over time apparently can not be solely explained by magnets variation or beta function changes, but it seems can be explained by energy changes. On the other hand, the energy change required by fitting with the amplitude tune dependence change is too large to be explained by the RF frequency change and the change of the sum of correctors in the period of the measurements. To explain this apparent contradiction, our analysis shows the long term storage ring circumference change can explain the apparent energy change. Our data indeed shows a seasonal change of the amplitude tune dependence over long term observation. This clearly also indicated a relation to long term closed orbit drift. Hence the current work indicates a new strategy to study how to use amplitude tune dependence as a guideline to analyze long term lattice parameter shifts and closed orbit drift, and improve the orbit and machine performance stability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB039

About •

paper received ※ 09 May 2021 paper accepted ※ 26 May 2021 issue date ※ 26 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB121

Progress Towards Soft X-Ray Beam Position Monitor Development

438

B. Podobedov, C. Eng, S. Hulbert, C. Mazzoli
BNL, Upton, New York, USA
D. Donetski, K. Kucharczyk, J. Liu, R. Lutchman
Stony Brook University, Stony Brook, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
X-ray beam position monitors (BPMs) are instrumental for storage ring light sources, where they reliably provide positional measurements of high-power beams in hard X-ray beamlines. However, despite a growing need, coming especially from coherent soft X-ray beamlines, non-invasive soft X-ray BPMs have not been demonstrated yet. We are presently working on a funded R&D proposal to develop a non-invasive soft X-ray BPM with micron-scale resolution for high-power white beams. In our approach, multi-pixel GaAs detector arrays are placed into the beam halo and beam position is inferred from the pixel photocurrent levels. Presently, the first detector array prototypes have been manufactured and are being prepared for low-power beam tests. The mechanical design of a BPM test-stand, which will be installed in the 23-ID canted soft X-ray undulator beamline at NSLS-II, is well under way. In addition, we are developing new algorithms of beam position calculation which take full advantage of extended multi-pixel detector arrays. In this paper we will review our design choices and discuss recent progress.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB121

About •

paper received ※ 03 June 2021 paper accepted ※ 13 July 2021 issue date ※ 28 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB005

Design Status Update of the Electron-Ion Collider

2585

C. Montag, E.C. Aschenauer, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, Z.A. Conway, K.A. Drees, A.V. Fedotov, W. Fischer, C. Folz, D.M. Gassner, X. Gu, R.C. Gupta, Y. Hao, A. Hershcovitch, C. Hetzel, D. Holmes, H. Huang, W.A. Jackson, J. Kewisch, Y. Li, C. Liu, H. Lovelace III, Y. Luo, M. Mapes, D. Marx, G.T. McIntyre, F. Méot, M.G. Minty, S.K. Nayak, R.B. Palmer, B. Parker, S. Peggs, B. Podobedov, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, R. Than, P. Thieberger, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, S. Verdú-Andrés, E. Wang, D. Weiss, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang
BNL, Upton, New York, USA
S.V. Benson, J.M. Grames, F. Lin, T.J. Michalski, V.S. Morozov, E.A. Nissen, J.P. Preble, R.A. Rimmer, T. Satogata, A. Seryi, M. Wiseman, W. Wittmer, Y. Zhang
JLab, Newport News, Virginia, USA
Y. Cai, Y.M. Nosochkov, G. Stupakov, M.K. Sullivan
SLAC, Menlo Park, California, USA
K.E. Deitrick, C.M. Gulliford, G.H. Hoffstaetter, J.E. Unger
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
E. Gianfelice-Wendt
Fermilab, Batavia, Illinois, USA
T. Satogata
ODU, Norfolk, Virginia, USA
D. Xu
FRIB, East Lansing, Michigan, USA

Funding: Work supported by BSA, LLC under Contract No. DE-SC0012704, by JSA, LLC under Contract No. DE-AC05-06OR23177, and by SLAC under Contract No. DE-AC02-76SF00515 with the U.S. Department of Energy.
The design of the electron-ion collider EIC to be constructed at Brookhaven National Laboratory has been continuously evolving towards a realistic and robust design that meets all the requirements set forth by the nuclear physics community in the White Paper. Over the past year activities have been focused on maturing the design, and on developing alternatives to mitigate risk. These include improvements of the interaction region design as well as modifications of the hadron ring vacuum system to accommodate the high average and peak beam currents. Beam dynamics studies have been performed to determine and optimize the dynamic aperture in the two collider rings and the beam-beam performance. We will present the EIC design with a focus on recent developments.

Poster WEPAB005 [2.095 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB005

About •

paper received ※ 14 May 2021 paper accepted ※ 22 June 2021 issue date ※ 16 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXB04

Non-Invasive Dispersion Function Measurement during Light Source Operations

3720

B. Podobedov, Y. Hidaka
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
We implemented a completely parasitic measurement of lattice dispersion functions in both horizontal and vertical planes, which is fully compatible with light source user operations. The measurement is performed by applying principal component analysis and adaptive filtering to very small residual orbit noise components introduced by the RF system and detected in the beam orbit data, sampled at 10 kHz. No changes in RF frequency are required. The measurement, performed once a minute, was shown to be robust and immune to changes in the beam current, residual orbit noise amplitude and frequency content as well as other factors. At low current it was shown to provide similar accuracy to the traditional method (which shifts the 500 MHz RF frequency by ±500 Hz). In this paper we will explain our measurement technique and present typical dispersion function stability achieved during NSLS-II operations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THXB04

About •

paper received ※ 26 June 2021 paper accepted ※ 13 July 2021 issue date ※ 23 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB254

Limiting Coherent Longitudinal Beam Oscillations in the EIC Electron Storage Ring

2046

B. Podobedov
Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA
M. Blaskiewicz
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
We study coherent longitudinal beam oscillations in the EIC electron storage ring (ESR). We show that to avoid unacceptable hadron emittance growth due to finite crossing angle, the amplitude of these oscillations needs to be limited to a fraction of a millimeter. Using an analytical model we estimate the amplitude of these oscillations under the two scenarios: 1) the beam is passively stable and the oscillations are driven by RF phase noise only; 2) a coupled-bunch instability, presently expected in the ESR, is damped by a longitudinal feedback system. We show that, for the 2nd scenario, comfortable specifications for RF phase noise and feedback sensor noise will be sufficient to maintain the oscillation amplitude within the required limits.

Poster TUPAB254 [1.347 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB254

About •

paper received ※ 12 May 2021 paper accepted ※ 18 June 2021 issue date ※ 26 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB238

An Overview of the Collective Effects and Impedance Calculation for the EIC

4266

A. Blednykh, D.M. Gassner, B. Podobedov, S. Verdú-Andrés
Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA
M. Blaskiewicz, C. Hetzel, B. Lepore, V.H. Ranjbar, M.P. Sangroula, P. Thieberger, G. Wang, Q. Wu
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy.
A new high-luminosity Electron-Ion Collider (EIC) is being designed at Brookhaven National Laboratory (BNL). Stable operation of the electron beam at an average current of 2.5A within 1100 bunches with a 7mm bunch length is one of the challenging tasks in achieving an electron-proton luminosity of 1033-1034 cm^-2 ses⁻¹ range. Beam induced heating, short-range and long-range wakefield analysis is discussed for some of the vacuum components of the electron storage ring (ESR), the hadron storage ring (HSR), and the rapid cycling synchrotron (RCS) and as well as the impact of the collective effects on the beam stability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB238

About •

paper received ※ 15 May 2021 paper accepted ※ 24 June 2021 issue date ※ 29 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)