UCLA, Los Angeles, USA
SLAC, Menlo Park, California, USA
RadiaBeam, Santa Monica, California, USA
The University of Liverpool, Liverpool, United Kingdom
The extremely intense beam generated at FACET-II provides the unique opportunity to investigate the effects of beam-driven GV/m fields in dielectrics exceeding meter-long interaction lengths. The diverse range of phenomena to be explored, such as material response in the terahertz regime, suppression of high-field pulse damping effects, advanced geometry structures, and methods for beam break up (BBU) mitigation, all within a single UHV vacuum vessel, requires flexibility and precision in the experimental layout. We present here details of the experimental design for the dielectric program at FACET-II. Specifically, consideration is given to the alignment of the dielectric structures due to the extreme fields associated with the electron beam, as well as implementation of electron beam and Cherenkov radiation-based diagnostics.
UCLA, Los Angeles, California, USA
RadiaBeam, Santa Monica, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Wakefields in dielectric structures are a useful tool for beam diagnostics and manipulation with applications including acceleration, shaping, chirping, and THz radiation generation. It is possible to use the produced THz radiation to diagnose the fields produced during the DWA interaction but, to do so, it is necessary to effectively out-couple this radiation to free space for transport to diagnostics such as a bolometer or interferometer. To this end, simulations have been conducted using CST Studio for a 10 GeV beam with FACET-II parameters in a slab-symmetric, dielectric waveguide. Various termination geometries were studied including flat cuts, metal horns, and the "Vlasov antenna". Simulations indicate that the Vlasov antenna geometry is optimal and detailed studies were conducted on a variety of dielectrics including quartz, diamond, and silicon. Multiple modes were excited and coherent Cherenkov radiation (CCR) was computationally generated for both symmetric and asymmetric beams. Finally, we include witness beams to study transport and acceleration dynamics as well as the achievable field gradients.
UCLA, Los Angeles, USA
RadiaBeam, Marina del Rey, California, USA
The University of Liverpool, Liverpool, United Kingdom
Cockcroft Institute, Warrington, Cheshire, United Kingdom
Future plasma acceleration experiments at FACET-II will measure betatron radiation in order to provide single-shot non-destructive beam diagnostics. We discuss three models for betatron radiation: a new idealized particle tracking code with Liénard-Wiechert radiation, a Quasi-Static Particle-in-Cell (PIC) code with Liénard-Wiechert radiation, and a full PIC code with radiation computed via a Monte-Carlo QED Method. Predictions of the three models for the E-310 experiment are presented and compared. Finally, we discuss beam parameter reconstruction from the double differential radiation spectrum.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
ASC HMTI, Minsk, Belarus
X-ray laser oscillator, dubbed XLO, is a recently proposed project at SLAC to build the first population inversion X-ray laser. XLO utilizes a train of XFEL SASE pulses to pump atomic core-states. The resulting amplified spontaneous emission radiation is recirculated in a backscattering Bragg cavity and subsequently amplified. XLO could provide fully coherent, transform-limited X-ray pulses with 50 meV bandwidth and 1e10 photons. Currently, XLO is being considered for operation at the copper K-alpha line at 8048 eV. In this work, we focus on the optimization of gain medium delivery in the XLO cavity. We consider a fast, subsonic jet of copper nitrate solution, moving through a cylindrical nozzle. We focus on the nozzle geometry optimization and possible diagnostics of the jet-XFEL interaction point.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
The ultra-compact x-ray free-electron laser (UC-XFEL), described in [J. B. Rosenzweig, et al. 2020 New J. Phys. 22 093067], combines several cutting edge beam physics techniques and technologies to realize an x-ray free electron laser at a fraction of the cost and footprint of existing XFEL installations. These elements include cryogenic, normally conducting RF structures for both the gun and linac, IFEL bunch compression, and short-period undulators. In this work, several stepping-stone, demonstrator scenarios under discussion for the UCLA SAMURAI Laboratory are detailed and simulated, employing different subsets of these elements. The cost, footprint, and technology risk for these scenarios are considered in addition to the anticipated engineering and physics experience gained.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
PBPL, Los Angeles, USA
The University of Liverpool, Liverpool, United Kingdom
UCLA has recently constructed SAMURAI, a new radiation bunker and laser infrastructure for advanced accelerator research. In its first phase, we will build a 30 MeV photoinjector with an S-band hybrid gun. The beam dynamics simulation for this beamline showed the generation of the beam with the emittance 2.4 um and the peak current 270 A. FIR-FEL experiments are planned in this beamline. The saturation peak power was expected at 170 MW.
UCLA, Los Angeles, USA
We present the design of a Compton spectrometer for use at FACET-II. A sextupole is used for magnetic spectral analysis, giving a broad dynamic range (180 keV through 28 MeV) and the capability to capture an energy-angular double-differential spectrum in a single shot. At low gamma energies, below 1 MeV, Compton spectroscopy becomes increasingly challenging as the scattering cross-section becomes more isotropic. To extend the range of the spectrometer down to around 180 keV, we use a 3D-printed tungsten collimator at the detector plane to preferentially select forward-scattered electrons at the Compton edge.
UCLA, Los Angeles, California, USA
Queen’s University of Belfast, Belfast, Northern Ireland, United Kingdom
MPI-K, Heidelberg, Germany
SLAC, Menlo Park, California, USA
CalPoly, San Luis Obispo, California, USA
AU, Aarhus, Denmark
We present the design of a pair spectrometer for use at FACET-II, where there is a need for spectroscopy of photons having energies up to 10 GeV. Incoming gammas are converted to high-energy positron-electron pairs, which are then subsequently analyzed in a dipole magnet. These charged particles are then recorded in arrays of acrylic Cherenkov counters, which are significantly less sensitive to background x-rays than scintillator counters in this case. To reconstruct energies of single high-energy photons, the spectrometer has a sensitivity to single positron-electron pairs. Even in this single-photon limit, there is always some low-energy continuum present, so spectral deconvolution is not trivial, for which we demonstrate a maximum likelihood reconstruction. Finally, end-to-end simulations of experimental scenarios, together with anticipated backgrounds, are presented.
UCLA, Los Angeles, California, USA
The Compton spectrometer under development at UCLA for FACET-II is a versatile tool to analyze gamma-ray spectra in a single shot, in which the energy and angular position of the incoming photons are recorded by observing the momenta and position of Compton scattered electrons. We present methods to reconstruct the primary spectrum from these data via machine learning and the EM Algorithm. A multi-layer fully connected neural network is used to perform the regression task of reconstructing both the double-differential spectrum and the photon energy spectrum incident with zero angular offset. We present the expected performance of these techniques, concentrating on the achievable energy resolution.
UCLA, Los Angeles, California, USA
At UCLA’s SAMURAI Laboratory, there will be a need for beam optics to accommodate operation over a range of beam energies. We present a modular quadrupole design that, in addition to satisfying this requirement, incorporates interchangeable tapered end-pieces for mitigation of higher-order aberrations *. The design progresses in an iterative fashion, whereby the tapered shapes, generated algorithmically, are fed into a field solver, and then the aberrations of the resulting particle trajectories are calculated and minimized.
* R. Baartman, Quadrupole shapes, Phys. Rev. ST Accel. Beams 15, 074002 (2012).