Keyword: magnet-design
Paper Title Other Keywords Page
WEPVA140 Design Studies and Optimization of High-Field Nb3Sn Dipole Magnets for a Future Very High Energy pp Collider dipole, collider, operation, quadrupole 3597
 
  • V.V. Kashikhin, I. Novitski, A.V. Zlobin
    Fermilab, Batavia, Illinois, USA
 
  Funding: Work is supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy
High filed accelerator magnets with operating fields of 15-16 T based on the Nb3Sn superconductor are being considered for the LHC energy upgrade or a future Very High Energy pp Collider. Magnet design studies are being conducted in the U.S., Europe and Asia to explore the limits of the Nb3Sn accelerator magnet technology while optimizing the magnet design and performance parame-ters, and reducing magnet cost. The first results of these studies performed at Fermilab in the framework of the US-MDP are reported in this paper.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA140  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPIK082 Quadrupole Magnet Design for the ESS MEBT quadrupole, dipole, operation, linac 4276
 
  • D. Fernandez-Cañoto, I. Bustinduy, G. Harper, J.L. Muñoz, I. Rueda, S. Varnasseri
    ESS Bilbao, Zamudio, Spain
 
  Funding: Consortium ESS Bilbao
ESS Bilbao is responsible for the design and fabrication of the ESS MEBT as an In-Kind contribution. The MEBT includes a focusing lattice with 11 quadrupole magnets with different operational gradients, but fabricated from the same model to simplify manufacturing and save costs. The magnet is designed with a 20.5 mm aperture radius to generate focusing fields of up to 2.74 T and also includes two additional steering coil systems assembled around yoke return arms to produce vertical and horizontal dipole fields up to 20 G·m. The magnet model, which fabrication starts in 2017, is here introduced. Magnetic, thermoelectric and dimensional studies are performed and results compared to specifications. Suitable transfer functions for magnet operation and magnetic fields for a doublet system with a BCM magnetically shielded placed between the two magnets are presented.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK082  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPIK128 Switching Magnet for Heavy-Ion Beam Separation power-supply, simulation, flattop, target 4403
 
  • J.J. Hartzell, R.B. Agustsson, S.V. Kutsaev, A. Laurich, A.Y. Murokh, F.H. O'Shea, T.J. Villabona
    RadiaBeam, Santa Monica, California, USA
  • G. Leyh
    LOD, Brisbane, USA
  • E.A. Savin
    RadiaBeam Systems, Santa Monica, California, USA
 
  Funding: This work was supported by the United States Department of Energy SBIR Grant No. DE-SC0015124.
We present a design for a complete switching magnet system capable of deflecting 8-25 MeV/u heavy-ion beams by 10 degrees. The system can produce flat-top pulses from 1 to 30 ms with rise and fall times of less than 0.5 ms at a duty cycle of 3-91% into a heavily inductive load. As determined by physics needs, the operational parameters of this magnet place it between fast rising kicker magnets with short duration and slow rising (or DC) resistive magnets which are optimized for efficiency and current-based power loss. This magnet must operate efficiently with over 91% duty factor and have a modestly fast rise time. The resulting design uses a resistive magnet scheme, to optimize the current-based losses, that is pulsed using a new circuit to control the applied voltage. The magnet has a laminated, iron dominated, H-shaped core. Directly-cooled copper pancake coils energize the magnet. The modulator employs a novel, proprietary, over-voltage topology to overcome the inherent inductance and achieve the fast rise and fall times, switching to a precision DC supply to efficiently maintain the flattop without requiring voltage in excess of ±3 kV.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK128  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)