Paper | Title | Page |
---|---|---|
TUOCB3 | CBETA - Cornell University Brookhaven National Laboratory Electron Energy Recovery Test Accelerator | 1285 |
|
||
Funding: New York State Energy Research and Development Authority (NYSERDA) Cornell's Lab of Accelerator-based Sciences and Education (CLASSE) and the Collider Accelerator Department (BNL-CAD) are developing the first SRF multi-turn energy recovery linac with Non-Scaling Fixed Field Alternating Gradient (NS-FFAG) racetrack. The existing injector and superconducting linac at Cornell University are installed together with a single NS-FFAG arcs and straight section at the opposite side of the the linac to form an Electron Energy Recovery (ERL) system. Electron beam from the 6 MeV injector is injected into the 36 MeV superconducting linac, and accelerated by four successive passes: from 42 MeV up to 150 MeV using the same NS-FFAG structure made of permanent magnets. After the maximum energy of 150 MeV is reached, the electron beam is brought back to the linac with opposite Radio Frequency (RF) phase. Energy is recovered and reduced to the initial value of 6 MeV with 4 additional passes. There are many novelties: a single NS-FFAG structure, made of permanent magnets, brings electrons with four different energies back to the linac. A new adiabatic NS-FFAG arc-to-straight section merges 4 separated orbits into a single orbit in the straight section. |
||
![]() |
Slides TUOCB3 [41.888 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUOCB3 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPVA011 | Comparing Behaviour of Simulated Proton Synchrotron Radiation in the Arcs of the LHC with Measurements | 2059 |
|
||
Funding: EuCARD2 CONACyT In previous work it was shown that at high proton-beam energies, synchrotron radiation is an important source of beam-screen heating, of beam-related vacuum pressure increase, and of primary photoelectrons, which can contribute to electron cloud formation. We have used the Synrad3D code developed at Cornell to simulate the photon distributions in the arcs of the LHC, HL-LHC, and FCC-hh. Specifically, for the LHC we studied the effect of the sawtooth chamber. In this paper specific results of the Synrad3D simulations are compared with simulations in Synrad+, developed at CERN; and later on compared with experimental data for actual LHC vacuum-chamber samples. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA011 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPVA081 | An MDM Spin Transparent Quadrupole for Storage Ring Based EDM Search | 2264 |
|
||
A storage ring provides an attractive option for directly measuring the electric dipole moment (EDM) of charged particles. To reach a sensitivity of 1029 e.cm, it is critical to mitigate the systematic errors from all sources. This daunting task is pushing the precision frontier of accelerator science and technology beyond its current state of the art. Here, we present a unique idea of a magnetic dipole moment (MDM) spin transparent quadrupole that can significantly reduce the systematic errors due to the transverse electric and magnetic fields that particle encounters. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA081 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPIK110 | Resistive Wall Instability and Impedance Studies of Narrow Undulator Chamber in CHESS-U | 3204 |
|
||
Funding: Work supported by NSF DMR-0936384 and NSF DMR-1332208 In a major upgrade of the Cornell Electron Storage Ring (CESR) one sextant of ring will be replaced with double bend achromats (DBAs) and undulator straights for x-ray users. The resistive wall impedance from the narrow gap (4.5 mm) undulator chambers (5 m per straight) may limit total beam. Here we report recent results of modelling and calculation of multibunch instabilities due to the impedance of chamber walls and transition tapers. The short range wakefields and resistive wall impedance are modelled and incorporated in a tracking simulation. The coupled-bunch growth rate found with the tracking study is in good agreement with the analytic approximation. We find that the resistive wall instability can be readily damped by our existing bunch-by-bunch feedback system. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK110 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPAB076 | Coherent Synchrotron Radiation Simulations for Off-Axis Beams Using the Bmad Toolkit | 3887 |
|
||
Coherent synchrotron radiation (CSR) potentially limits operation accelerators with high bunch charges and/or short bunch lengths by increasing energy spread, and by Except at the lowest beam energies, the one dimensional treatment of coherent synchrotron radiation (CSR) originally developed by Saldin is an efficient and reasonably accurate way to simulate the effects of CSR on a particle beam. A possible problem with standard implementations of the 1D CSR formalism is that these implementations assume that the beam centroid is close to the reference trajectory that defines the lattice. In this paper, the one dimensional treatment is extended to take into account beams whose centroid is far from the reference trajectory and an example using the Cornell-BNL Fixed Field Alternating Gradient (FFAG) accelerator CBETA is given. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB076 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |