IPAC2016 - List of Authors (Tollestrup, A.V.)

Paper	Title	Page
MOPMW025	Vacuum RF Breakdown of Accelerating Cavities in Multi-Tesla Magnetic Fields	444
	D.L. Bowring, A. Moretti, M.A. Palmer, D.W. Peterson, A.V. Tollestrup, K. Yonehara Fermilab, Batavia, Illinois, USA B.T. Freemire IIT, Chicago, Illinois, USA A.V. Kochemirovskiy University of Chicago, Chicago, Illinois, USA P.G. Lane, Y. Torun Illinois Institute of Technology, Chicago, Illlinois, USA
	Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359. Ionization cooling of intense muon beams requires the operation of high-gradient, normal-conducting RF structures within multi-Tesla magnetic fields. The application of strong magnetic fields has been shown to lead to an increase in vacuum RF breakdown. This phenomenon imposes operational (i.e. gradient) limitations on cavities in ionization cooling channels, and has a bearing on the design and operation of other RF structures as well, such as photocathodes and klystrons. We present recent results from Fermilab's MuCool Test Area (MTA), in which 201 and 805 MHz cavities were operated at high power both with and without the presence of multi-Tesla magnetic fields. We present an analysis of damage due to breakdown in these cavities, as well as measurements related to dark current and their relation to a conceptual model describing breakdown phenomena.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW025
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW030	High Powered Tests of Dielectric Loaded High Pressure RF Cavities for Use in Muon Cooling Channels	460
	B.T. Freemire IIT, Chicago, Illinois, USA D.L. Bowring, A. Moretti, D.W. Peterson, A.V. Tollestrup, Y. Torun, K. Yonehara Fermilab, Batavia, Illinois, USA A.V. Kochemirovskiy University of Chicago, Chicago, Illinois, USA Y. Torun Illinois Institute of Technology, Chicago, Illlinois, USA
	Funding: This work is supported by the Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359. Bright muon sources require six dimensional cooling to achieve acceptable luminosities. Ionization cooling is the only known method able to do so within the muon lifetime. One proposed cooling channel, the Helical Cooling Channel, utilizes gas filled radio frequency cavities to both mitigate RF breakdown in the presence of strong, external magnetic fields, and provide the cooling medium. Engineering constraints on the diameter of the magnets within which these cavities operate dictate the radius of the cavities be decreased at their nominal operating frequency. To accomplish this, one may load the cavities with a larger dielectric material. Alumina of purities ranging from 96 to 99.8% was tested in a high pressure RF test cell at the MuCool Test Area at Fermilab. The results of breakdown studies with pure nitrogen gas, and oxygen-doped nitrogen gas indicate the peak surface electric field on the alumina ranges between 10 and 15 MV/m. How these results affect the design of a prototype cooling channel cavity will be discussed.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW031	Beam Test of a Dielectric Loaded High Pressure RF Cavity for Use in Muon Cooling Channels	463
	B.T. Freemire IIT, Chicago, Illinois, USA D.L. Bowring, A. Moretti, D.W. Peterson, A.V. Tollestrup, K. Yonehara Fermilab, Batavia, Illinois, USA A.V. Kochemirovskiy University of Chicago, Chicago, Illinois, USA Y. Torun Illinois Institute of Technology, Chicago, Illlinois, USA
	Funding: This work is supported by the Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359. Bright muon sources require six dimensional cooling to achieve acceptable luminosities. Ionization cooling is the only known method able to do so within the muon lifetime. One proposed cooling channel, the Helical Cooling Channel, utilizes gas filled radio frequency cavities to both mitigate RF breakdown in the presence of strong, external magnetic fields, and provide the cooling medium. Engineering constraints on the diameter of the magnets within which these cavities operate dictate the radius of the cavities be decreased at their nominal operating frequency. To accomplish this, one may load the cavities with a larger dielectric material. A 99.5% alumina ring was inserted in a high pressure RF test cell and subjected to an intense proton beam at the MuCool Test Area at Fermilab. The results of the performance of this dielectric loaded high pressure RF cavity will be presented.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW031
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR030	Gas Filled RF Resonator Hadron Beam Monitor for Intense Neutrino Beam Experiments	2733
	K. Yonehara, A.V. Tollestrup, R.M. Zwaska Fermilab, Batavia, Illinois, USA R.J. Abrams, R.P. Johnson, G.M. Kazakevich Muons, Inc, Illinois, USA H.M. Dinkel University of Missouri, Columbia, Columbia, Missouri, USA B.T. Freemire IIT, Chicago, Illinois, USA
	Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE HEP STTR Grant DE-SC0013795. MW-class beam facilities are being considered all over the world to produce an intense neutrino beam for fundamental particle physics experiments. A radiation-robust beam monitor system is required to diagnose the primary and secondary beam qualities in high-radiation environments. We have proposed a novel gas-filled RF-resonator hadron beam monitor in which charged particles passing through the resonator produce ionized plasma that changes the permittivity of the gas. The sensitivity of the monitor has been evaluated in numerical simulation. A signal manipulation algorithm has been designed. A prototype system will be constructed and tested by using a proton beam at the MuCool Test Area at Fermilab.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOR030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Vacuum RF Breakdown of Accelerating Cavities in Multi-Tesla Magnetic Fields

444

D.L. Bowring, A. Moretti, M.A. Palmer, D.W. Peterson, A.V. Tollestrup, K. Yonehara
Fermilab, Batavia, Illinois, USA
B.T. Freemire
IIT, Chicago, Illinois, USA
A.V. Kochemirovskiy
University of Chicago, Chicago, Illinois, USA
P.G. Lane, Y. Torun
Illinois Institute of Technology, Chicago, Illlinois, USA

Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359.
Ionization cooling of intense muon beams requires the operation of high-gradient, normal-conducting RF structures within multi-Tesla magnetic fields. The application of strong magnetic fields has been shown to lead to an increase in vacuum RF breakdown. This phenomenon imposes operational (i.e. gradient) limitations on cavities in ionization cooling channels, and has a bearing on the design and operation of other RF structures as well, such as photocathodes and klystrons. We present recent results from Fermilab's MuCool Test Area (MTA), in which 201 and 805 MHz cavities were operated at high power both with and without the presence of multi-Tesla magnetic fields. We present an analysis of damage due to breakdown in these cavities, as well as measurements related to dark current and their relation to a conceptual model describing breakdown phenomena.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW025

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW030

High Powered Tests of Dielectric Loaded High Pressure RF Cavities for Use in Muon Cooling Channels

460

B.T. Freemire
IIT, Chicago, Illinois, USA
D.L. Bowring, A. Moretti, D.W. Peterson, A.V. Tollestrup, Y. Torun, K. Yonehara
Fermilab, Batavia, Illinois, USA
A.V. Kochemirovskiy
University of Chicago, Chicago, Illinois, USA
Y. Torun
Illinois Institute of Technology, Chicago, Illlinois, USA

Funding: This work is supported by the Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359.
Bright muon sources require six dimensional cooling to achieve acceptable luminosities. Ionization cooling is the only known method able to do so within the muon lifetime. One proposed cooling channel, the Helical Cooling Channel, utilizes gas filled radio frequency cavities to both mitigate RF breakdown in the presence of strong, external magnetic fields, and provide the cooling medium. Engineering constraints on the diameter of the magnets within which these cavities operate dictate the radius of the cavities be decreased at their nominal operating frequency. To accomplish this, one may load the cavities with a larger dielectric material. Alumina of purities ranging from 96 to 99.8% was tested in a high pressure RF test cell at the MuCool Test Area at Fermilab. The results of breakdown studies with pure nitrogen gas, and oxygen-doped nitrogen gas indicate the peak surface electric field on the alumina ranges between 10 and 15 MV/m. How these results affect the design of a prototype cooling channel cavity will be discussed.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW031

Beam Test of a Dielectric Loaded High Pressure RF Cavity for Use in Muon Cooling Channels

463

B.T. Freemire
IIT, Chicago, Illinois, USA
D.L. Bowring, A. Moretti, D.W. Peterson, A.V. Tollestrup, K. Yonehara
Fermilab, Batavia, Illinois, USA
A.V. Kochemirovskiy
University of Chicago, Chicago, Illinois, USA
Y. Torun
Illinois Institute of Technology, Chicago, Illlinois, USA

Funding: This work is supported by the Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359.
Bright muon sources require six dimensional cooling to achieve acceptable luminosities. Ionization cooling is the only known method able to do so within the muon lifetime. One proposed cooling channel, the Helical Cooling Channel, utilizes gas filled radio frequency cavities to both mitigate RF breakdown in the presence of strong, external magnetic fields, and provide the cooling medium. Engineering constraints on the diameter of the magnets within which these cavities operate dictate the radius of the cavities be decreased at their nominal operating frequency. To accomplish this, one may load the cavities with a larger dielectric material. A 99.5% alumina ring was inserted in a high pressure RF test cell and subjected to an intense proton beam at the MuCool Test Area at Fermilab. The results of the performance of this dielectric loaded high pressure RF cavity will be presented.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-MOPMW031

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR030

Gas Filled RF Resonator Hadron Beam Monitor for Intense Neutrino Beam Experiments

2733

K. Yonehara, A.V. Tollestrup, R.M. Zwaska
Fermilab, Batavia, Illinois, USA
R.J. Abrams, R.P. Johnson, G.M. Kazakevich
Muons, Inc, Illinois, USA
H.M. Dinkel
University of Missouri, Columbia, Columbia, Missouri, USA
B.T. Freemire
IIT, Chicago, Illinois, USA

Funding: Work supported by Fermilab Research Alliance, LLC under Contract No. DE-AC02-07CH11359 and DOE HEP STTR Grant DE-SC0013795.
MW-class beam facilities are being considered all over the world to produce an intense neutrino beam for fundamental particle physics experiments. A radiation-robust beam monitor system is required to diagnose the primary and secondary beam qualities in high-radiation environments. We have proposed a novel gas-filled RF-resonator hadron beam monitor in which charged particles passing through the resonator produce ionized plasma that changes the permittivity of the gas. The sensitivity of the monitor has been evaluated in numerical simulation. A signal manipulation algorithm has been designed. A prototype system will be constructed and tested by using a proton beam at the MuCool Test Area at Fermilab.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPOR030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)