| Paper | Title | Page |
|---|---|---|
| TUPMW014 | Improved Aperture Measurements at the LHC and Results from their Application in 2015 | 1446 |
|
||
| A good knowledge of the available aperture in the LHC is essential for a safe operation due to the risk of magnet quenches or even damage in case of uncontrolled beam losses. Experimental validations of the available aperture are therefore crucial and were in the past carried out by either a collimator scan combined with beam excitations or through the use of local orbit bumps. In this paper, we show a first comparison of these methods in the same machine configuration, as well as a new very fast method based on a beam-based collimator alignment and a new faster variant of the collimator scan method. The methods are applied to the LHC operational configuration for 2015 at injection and with squeezed beams and the measured apertures are presented. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMW014 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMW015 | Symplectic Tracking of Multi-Isotopic Heavy-Ion Beams in SixTrack | 1450 |
|
||
|
Funding: Work suppported by the Wolfgang Gentner Programme of the German BMBF The software SixTrack provides symplectic proton tracking over a large number of turns. The code is used for the tracking of beam halo particles and the simulation of their interaction with the collimators to study the efficiency of the LHC collimation system. Tracking simulations for heavy-ion beams require taking into account the mass to charge ratio of each particle because heavy ions can be subject to fragmentation at their passage through the collimators. In this paper we present the derivation of a Hamiltonian for multi-isotopic heavy-ion beams and symplectic tracking maps derived from it. The resulting tracking maps were implemented in the tracking software SixTrack. With this modification, SixTrack can be used to natively track heavy-ion beams of multiple isotopes through a magnetic accelerator lattice. |
||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMW015 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPMW027 | The 2015 Heavy-Ion Run of the LHC | 1493 |
|
||
| In late 2015 the LHC collided lead nuclei at a beam energy of 6.37 Z TeV, chosen to match the 5.02 TeV per colliding nucleon pair of the p-Pb collision run in 2013. In so doing, it surpassed its design luminosity by a factor of 2. Besides the higher energy, the operational configuration had a number of new features with respect to the previous Pb-Pb run at 3.5 Z TeV in 2011; unusual bunch patterns providing collisions in the LHCb experiment for the first time, luminosity levelling and sharing requirements, a vertical displacement of the interaction point in the ALICE experiment, and operation closer to magnet quench limits with mitigation measures. We present a summary of the commissioning and operation and what has been learned in view of future heavy-ion operation at higher luminosity. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMW027 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPMW007 | Validation of Off-momentum Cleaning Performance of the LHC Collimation System | 2427 |
|
||
| The LHC collimation system is designed to provide effective cleaning against losses coming from off-momentum particles, either due to un-captured beam or to an unexpected RF frequency change. For this reason the LHC is equipped with a hierarchy of collimators in IR3: primary, secondary and absorber collimators. After every collimator alignment or change of machine configuration the off-momentum cleaning efficiency is validated with loss maps at low intensity. We describe here the improved technique used in 2015 to generate such loss maps without completely dumping the beam into the collimators. The achieved performance of the collimation system for momentum cleaning is reviewed. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW007 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPMW029 | Simulation of Heavy-Ion Beam Losses with the SixTrack-FLUKA Active Coupling | 2490 |
| SUPSS008 | use link to see paper's listing under its alternate paper code | |
|
||
|
Funding: Work suppported by the Wolfgang Gentner Programme of the German BMBF The LHC heavy-ion program aims to further increase the stored ion beam energy, putting high demands on the LHC collimation system. Accurate simulations of the ion collimation efficiency are crucial to validate the feasibility of new proposed configurations and beam parameters. In this paper we present a generalized framework of the SixTrack-FLUKA coupling to simulate the fragmentation of heavy-ions in the collimators and their motion in the LHC lattice. We compare heavy-ion loss maps simulated on the basis of this framework with the loss distributions measured during heavy-ion operation in 2011 and 2015. |
||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW029 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPMW030 | Cleaning Performance of the Collimation System of the High Luminosity Large Hadron Collider | 2494 |
|
||
| Different upgrades of the LHC will be carried out in the framework of the High Luminosity project (HL-LHC), where the total stored energy in the machine will increase up to about 700 MJ. This unprecedented stored energy poses serious challenges for the collimation system, which was designed to handle safely up to about 360 MJ. In this paper the baseline collimation layout for HL-LHC is described, with main focus on upgrades related to the cleaning of halo and physics debris, and its expected performance is discussed. The main upgrade items include the presence of new collimators in the dispersion suppressor of the betatron cleaning insertion installed between two 11 T dipoles, and two additional collimators for an improved local protection of triplet magnets. Thus, optimized settings for the entire and upgraded collimation chain were conceived and are shown here together with the resulting cleaning performance. Moreover, the cleaning performance taking into account crab cavities it is also discussed. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW030 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPMW032 | Radiation-induced Effects on LHC Collimator Materials under Extreme Beam Conditions | 2502 |
|
||
| Over the last years, several samples of present and novel LHC collimator materials were irradiated under various beam conditions (using protons, fast neutrons, light and heavy ions at different energies and fluences) in different facilities around the world. This was achieved through an international collaboration including many companies and laboratories over the world. The main goal of the beam tests and the post-irradiation campaign is the definition of a threshold for radiation damage above which LHC collimators need to be replaced. In this paper, highlights of the measurements performed will be presented. First conclusions from the available data are also discussed. | ||
| DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-WEPMW032 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |