IPAC2011 - List of Authors (Matsumoto, T.)

Paper

Title

Page

Commissioning and Performance of the Beam Monitor System for XFEL/SPring-8 “SACLA”

47

Y. Otake, C. Kondo, H. Maesaka
RIKEN Spring-8 Harima, Hyogo, Japan
H. Ego, S. Matsubara, T. Matsumoto, T. Sakurai, H. Tomizawa, K. Yanagida
JASRI/SPring-8, Hyogo-ken, Japan
S.I. Inoue
SES, Hyogo-pref., Japan

The construction of a beam monitor system for XFEL/SPring 8 “SACLA” was completed. The system was developed to realize a spatial resolution of less than 3 um to align a beam orbit for an undulator section with about 100 m long and a temporal resolution to measure bunch lengths from 1 ns to 30 fs to maintain a constant peak beam current conducting stable SASE lasing. The system principally comprises cavity type beam position monitors (BPM), current monitors (CT), screen monitors (SCM) and bunch length measurement instruments, such as an rf deflector and CSR detectors. Commissioning of SACLA started from March 2011, and the monitors performed sufficient roles to tune beams for the lasing. The achieved over-all performances of the system including DAQ are: the BPM have spatial resolution of 300 nm, the bunch length monitors observe bunch lengths from 1ns in an injector with velocity bunching to less than 30 fs after three-stage bunch compressors. The less than a 3 um spatial resolution of the SCM was also confirmed in practical beam operation. By these fulfilled performances, the stable lasing of SACLA will be achieved. This report describes commissioning, performance of the system.

Slides MOOCB02 [7.516 MB]

TUPC093

CSR Bunch Length Monitor for XFEL/SPring-8 - SACLA

1224

C. Kondo, S. Matsubara, T. Matsumoto
JASRI/SPring-8, Hyogo-ken, Japan
S.I. Inoue, H. Maesaka, Y. Otake
RIKEN Spring-8 Harima, Hyogo, Japan

SPring-8 Angstrom Compact Free Electron Laser (SACLA) is now under commissioning operation, aimed at the generation of a sub-angstrom free electron laser (FEL). In order to ensure the stable FEL generation, non-distractive bunch length monitors utilizing coherent synchrotron radiation (CSR) are installed. The monitors are located at the downstream of individual bunch compressor (BC1-BC3), and they measure the radiation emitted at the individual last magnets of the chicanes. At the magnets, beams with bunch lengths form 10 fs to 1000 fs generate the CSRs with a spectrum ranging the almost whole infrared region (0.03 - 3 THz). The CSRs are detected by a Schottky diode at the BC1, or pyroelectric detectors and a simple organic lens optical system at BC2 and 3. The bunch length monitor systems are used for bunch length feedback control to obtain the stable lasing by changing the rf parameter of acceleration cavities before the BCs. A preliminary system for the above mentioned system was tested at the SCSS test accelerator, and it showed sufficient performance to measure bunch length up to 300 fs. In this report, we describe the design and the results of the first operation.

WEPC143

First Operation of the SACLA Control System in SPring-8

2325

R. Tanaka, Y. Furukawa, T. Hirono, M. Ishii, M. Kago, A. Kiyomichi, T. Masuda, T. Matsumoto, T. Matsushita, T. Ohata, C. Saji, T. Sugimoto, M. Yamaga, A. Yamashita
JASRI/SPring-8, Hyogo-ken, Japan
T. Fukui, T. Hatsui, N. Hosoda, T. Ohshima, T. Otake, Y. Otake, H. Takebe
RIKEN/SPring-8, Hyogo, Japan
H. Maesaka
RIKEN Spring-8 Harima, Hyogo, Japan

The control system design of the X-ray free electron laser facility (SACLA) in SPring-8 has started in 2006. Now, the facility has completed to start beam commissioning in February 2011. The electron beams were successfully accelerated up to 8 GeV and the first SASE X-ray was observed. The control system adopts the 3-tier standard model by using MADOCA framework developed in SPring-8. The upper control layer consists of Linux PCs for operator consoles, Sybase RDBMS for data logging and FC-based NAS for NFS. The lower layer consists of VMEbus systems with off-the-shelf I/O boards and specially developed boards for RF waveform processing with high precision. Solaris OS is adopted to operate VMEbus CPU. The PLC is used for slow control and connected to the VME systems via FL-net. The Device-net is adopted for frontend device control to reduce the number of signal cables. Some of VMEbus systems have a beam-synchronized data-taking system to meet 60Hz electron beam operation for the beam tuning diagnostics. The accelerator control system has gateways not only to monitor device status but also control the tuning points of the facility utility system, especially cooling water.

MOODA02

S1-Global Module Tests at STF/KEK

38

D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy

S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.

Slides MOODA02 [2.982 MB]

MOPC155

Performance of the Micro-TCA Digital Feedback Board for DRFS Test at KEK-STF

445

T. Miura, D.A. Arakawa, S. Fukuda, E. Kako, H. Katagiri, T. Matsumoto, S. Michizono, Y. Yano
KEK, Ibaraki, Japan

The test of distributed RF scheme (DRFS) for ILC was carried out at the superconducting RF test facility in KEK (KEK-STF). The LLRF system and two klystron units were installed in the same tunnel as SRF cavities. The vector-sum control for two cavities was done by using the micro-TCA digital feedback board. This board was the same one developed for the compact-ERL at KEK, but the software was changed for pulse operation. The result of the performance will be reported.

MOPC156

Operation Test of Distributed RF System with Circulator-less Waveguide Distribution in S1-Global Project at STF/KEK

448

T. Matsumoto, M. Akemoto, D.A. Arakawa, S. Fukuda, H. Honma, E. Kako, H. Katagiri, S. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakajima, K. Nakao, T. Shidara, T. Takenaka, Y. Yano, M. Yoshida
KEK, Ibaraki, Japan

Distributed RF System (DRFS) is one candidate for a single main linac tunnel design of International International Linear Collider (ILC). In the DRFS, more than ten 800-kW klystrons having a modulating anode are operated by a common DC power and a modulation anode modulator. Each klystron feeds its power into two superconducting cavities and its waveguide distribution system is configured without circulators. This DRFS consists of four SC cavities, two klystrons and a modulator was demonstrated in S1-Global project. The results of circulator-less operation in the DRFS will be reported.

MOPC157

Performance of LLRF System at S1-Global in KEK*

451

S. Michizono, D.A. Arakawa, S. Fukuda, E. Kako, H. Katagiri, T. Matsumoto, T. Miura, Y. Yano
KEK, Ibaraki, Japan

Vector-sum control was carried out at S1-Global. The rf stabilities of 0.007% in amplitude and 17 mdeg. in phase are obtained. Various diagnostics (such as on-line quench pulse detector, dynamic detuning monitor and so on) is implemented. The IF-mixture system, where 3 intermediate frequencies (IF) are used and the number of ADCs can be reduced, was used as rf waveform monitors. These monitors are used for the performance analysis. Quench phenomena observed at the high-gradient operation are also analyzed from the view point of dynamic change in loaded Q and cavity detuning during rf pulse.

TUPS087

Development of Permanent Magnet Focusing for Klystrons

1743

Y. Iwashita
Kyoto ICR, Uji, Kyoto, Japan
S. Fukuda, T. Matsumoto, S. Michizono, M. Yoshida
KEK, Ibaraki, Japan

Funding: KEK
Applying permanent magnet technology to beam focusing in klystrons can reduce their power consumption and reliability. These features benefit variety of applications especially for large facilities that use number of klystrons such as ILC. A half scaled model will be available in summer and full model should be available in September. Research and Development status will be reported.

WEPO035

Thermal Performance of the S1-Global Cryomodule for ILC

2472

N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise
DESY, Hamburg, Germany

The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.

Paper	Title	Page
MOOCB02	Commissioning and Performance of the Beam Monitor System for XFEL/SPring-8 “SACLA”	47
	Y. Otake, C. Kondo, H. Maesaka RIKEN Spring-8 Harima, Hyogo, Japan H. Ego, S. Matsubara, T. Matsumoto, T. Sakurai, H. Tomizawa, K. Yanagida JASRI/SPring-8, Hyogo-ken, Japan S.I. Inoue SES, Hyogo-pref., Japan
	The construction of a beam monitor system for XFEL/SPring 8 “SACLA” was completed. The system was developed to realize a spatial resolution of less than 3 um to align a beam orbit for an undulator section with about 100 m long and a temporal resolution to measure bunch lengths from 1 ns to 30 fs to maintain a constant peak beam current conducting stable SASE lasing. The system principally comprises cavity type beam position monitors (BPM), current monitors (CT), screen monitors (SCM) and bunch length measurement instruments, such as an rf deflector and CSR detectors. Commissioning of SACLA started from March 2011, and the monitors performed sufficient roles to tune beams for the lasing. The achieved over-all performances of the system including DAQ are: the BPM have spatial resolution of 300 nm, the bunch length monitors observe bunch lengths from 1ns in an injector with velocity bunching to less than 30 fs after three-stage bunch compressors. The less than a 3 um spatial resolution of the SCM was also confirmed in practical beam operation. By these fulfilled performances, the stable lasing of SACLA will be achieved. This report describes commissioning, performance of the system.
	Slides MOOCB02 [7.516 MB]

TUPC093	CSR Bunch Length Monitor for XFEL/SPring-8 - SACLA	1224
	C. Kondo, S. Matsubara, T. Matsumoto JASRI/SPring-8, Hyogo-ken, Japan S.I. Inoue, H. Maesaka, Y. Otake RIKEN Spring-8 Harima, Hyogo, Japan
	SPring-8 Angstrom Compact Free Electron Laser (SACLA) is now under commissioning operation, aimed at the generation of a sub-angstrom free electron laser (FEL). In order to ensure the stable FEL generation, non-distractive bunch length monitors utilizing coherent synchrotron radiation (CSR) are installed. The monitors are located at the downstream of individual bunch compressor (BC1-BC3), and they measure the radiation emitted at the individual last magnets of the chicanes. At the magnets, beams with bunch lengths form 10 fs to 1000 fs generate the CSRs with a spectrum ranging the almost whole infrared region (0.03 - 3 THz). The CSRs are detected by a Schottky diode at the BC1, or pyroelectric detectors and a simple organic lens optical system at BC2 and 3. The bunch length monitor systems are used for bunch length feedback control to obtain the stable lasing by changing the rf parameter of acceleration cavities before the BCs. A preliminary system for the above mentioned system was tested at the SCSS test accelerator, and it showed sufficient performance to measure bunch length up to 300 fs. In this report, we describe the design and the results of the first operation.

WEPC143	First Operation of the SACLA Control System in SPring-8	2325
	R. Tanaka, Y. Furukawa, T. Hirono, M. Ishii, M. Kago, A. Kiyomichi, T. Masuda, T. Matsumoto, T. Matsushita, T. Ohata, C. Saji, T. Sugimoto, M. Yamaga, A. Yamashita JASRI/SPring-8, Hyogo-ken, Japan T. Fukui, T. Hatsui, N. Hosoda, T. Ohshima, T. Otake, Y. Otake, H. Takebe RIKEN/SPring-8, Hyogo, Japan H. Maesaka RIKEN Spring-8 Harima, Hyogo, Japan
	The control system design of the X-ray free electron laser facility (SACLA) in SPring-8 has started in 2006. Now, the facility has completed to start beam commissioning in February 2011. The electron beams were successfully accelerated up to 8 GeV and the first SASE X-ray was observed. The control system adopts the 3-tier standard model by using MADOCA framework developed in SPring-8. The upper control layer consists of Linux PCs for operator consoles, Sybase RDBMS for data logging and FC-based NAS for NFS. The lower layer consists of VMEbus systems with off-the-shelf I/O boards and specially developed boards for RF waveform processing with high precision. Solaris OS is adopted to operate VMEbus CPU. The PLC is used for slow control and connected to the VME systems via FL-net. The Device-net is adopted for frontend device control to reduce the number of signal cables. Some of VMEbus systems have a beam-synchronized data-taking system to meet 60Hz electron beam operation for the beam tuning diagnostics. The accelerator control system has gateways not only to monitor device status but also control the tuning points of the facility utility system, especially cooling water.

MOODA02	S1-Global Module Tests at STF/KEK	38
	D. Kostin, K. Jensch, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy
	S1-Global collaborative effort of INFN, DESY, FNAL, SLAC and KEK, recently successfully finished at KEK as a part of ILC GDE, is an important milestone for the ILC. International collaboration of three regions, Asia, North America and Europe, proved to be efficient on the construction and cold tests of the accelerating module consisting of 8 SRF cavities; 2 from FNAL, 2 from DESY and 4 from KEK. Three different cavity tuning systems were tested together with two types of high power couplers. The module was cooled down three times which enabled extensive high power tests with cavities, performance limits investigation, Lorentz force detuning tests, simultaneous multiple cavities operation and other activities such as an operation test of distributed RF scheme with low level RF feedback. The results of this S1-Global module test are presented and discussed.
	Slides MOODA02 [2.982 MB]

MOPC155	Performance of the Micro-TCA Digital Feedback Board for DRFS Test at KEK-STF	445
	T. Miura, D.A. Arakawa, S. Fukuda, E. Kako, H. Katagiri, T. Matsumoto, S. Michizono, Y. Yano KEK, Ibaraki, Japan
	The test of distributed RF scheme (DRFS) for ILC was carried out at the superconducting RF test facility in KEK (KEK-STF). The LLRF system and two klystron units were installed in the same tunnel as SRF cavities. The vector-sum control for two cavities was done by using the micro-TCA digital feedback board. This board was the same one developed for the compact-ERL at KEK, but the software was changed for pulse operation. The result of the performance will be reported.

MOPC156	Operation Test of Distributed RF System with Circulator-less Waveguide Distribution in S1-Global Project at STF/KEK	448
	T. Matsumoto, M. Akemoto, D.A. Arakawa, S. Fukuda, H. Honma, E. Kako, H. Katagiri, S. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakajima, K. Nakao, T. Shidara, T. Takenaka, Y. Yano, M. Yoshida KEK, Ibaraki, Japan
	Distributed RF System (DRFS) is one candidate for a single main linac tunnel design of International International Linear Collider (ILC). In the DRFS, more than ten 800-kW klystrons having a modulating anode are operated by a common DC power and a modulation anode modulator. Each klystron feeds its power into two superconducting cavities and its waveguide distribution system is configured without circulators. This DRFS consists of four SC cavities, two klystrons and a modulator was demonstrated in S1-Global project. The results of circulator-less operation in the DRFS will be reported.

MOPC157	Performance of LLRF System at S1-Global in KEK*	451
	S. Michizono, D.A. Arakawa, S. Fukuda, E. Kako, H. Katagiri, T. Matsumoto, T. Miura, Y. Yano KEK, Ibaraki, Japan
	Vector-sum control was carried out at S1-Global. The rf stabilities of 0.007% in amplitude and 17 mdeg. in phase are obtained. Various diagnostics (such as on-line quench pulse detector, dynamic detuning monitor and so on) is implemented. The IF-mixture system, where 3 intermediate frequencies (IF) are used and the number of ADCs can be reduced, was used as rf waveform monitors. These monitors are used for the performance analysis. Quench phenomena observed at the high-gradient operation are also analyzed from the view point of dynamic change in loaded Q and cavity detuning during rf pulse.

TUPS087	Development of Permanent Magnet Focusing for Klystrons	1743
	Y. Iwashita Kyoto ICR, Uji, Kyoto, Japan S. Fukuda, T. Matsumoto, S. Michizono, M. Yoshida KEK, Ibaraki, Japan
	Funding: KEK Applying permanent magnet technology to beam focusing in klystrons can reduce their power consumption and reliability. These features benefit variety of applications especially for large facilities that use number of klystrons such as ILC. A half scaled model will be available in summer and full model should be available in September. Research and Development status will be reported.

WEPO035	Thermal Performance of the S1-Global Cryomodule for ILC	2472
	N. Ohuchi, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan T.T. Arkan, S. Barbanotti, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, N.J. Walker, H. Weise DESY, Hamburg, Germany
	The S1-Global program is the international research collaboration among INFN, FNAL, DESY, SLAC and KEK as one of the GDE R&D for construction of ILC. The S1-Global cryomodule consists of two half-size cryomodules of 6 meter. One was designed by IFNF, and it contained two FNAL cavities and two DESY cavities. The associated components, like input couplers and RF cables, were same as the TTF-III cryomodule. The other was designed by KEK, and the thermal design was based on the TTF-III cryomodule. This cryomodule contains four KEK cavities with the associated components which were designed by KEK. For characterizing the thermal performances of two cryomodules, the static heat load and the temperature profiles of the cold components were measured. The temperature profiles of the components were compared between two cryomodules and the static heat load was evaluated with the design values of the cryomodules. The dynamic losses of the DESY, FNAL and two KEK cavities at their maximum operative gradients were measured and, with the measured losses, Q values were calculated. In this paper, we will make the summary of the thermal measurements of the S1-Global cryomodule.