Author: Efthymiopoulos, I.
Paper Title Page
MOPZ008 Particle Production Simulations for the Neutrino Factory Target 835
 
  • J.J. Back
    University of Warwick, Coventry, United Kingdom
  • X.P. Ding
    UCLA, Los Angeles, California, USA
  • I. Efthymiopoulos, S.S. Gilardoni, O.M. Hansen, G. Prior
    CERN, Geneva, Switzerland
  • H.G. Kirk, N. Souchlas
    BNL, Upton, Long Island, New York, USA
  • R.J. Weggel
    Particle Beam Lasers, Inc., Northridge, California, USA
 
  Funding: EU FP7 EUROnu WP3
In the International Design Study for the Neutrino Factory (IDS-NF), a proton beam with a kinetic energy between 5 and 15 GeV interacts with a liquid mercury jet target in order to produce pions that will decay to muons, which in turn decay to neutrinos. The target is situated in a solenoidal field tapering from 20 T down to 1.5 T over a length of several metres, allowing for an optimised capture of pions in order to produce a useful muon beam for the machine. We present results of target particle production calculations using MARS, FLUKA and G4BEAMLINE simulation codes.
 
 
TUPS058 HiRadMat: A New Irradiation Facility for Material Testing at CERN 1665
 
  • I. Efthymiopoulos, S. Evrard, H. Gaillard, D. Grenier, C. Heßler, M. Meddahi, A. Pardons, C. Theis, P. Trilhe, H. Vincke
    CERN, Geneva, Switzerland
  • N. Charitonidis
    EPFL, Lausanne, Switzerland
 
  HiRadMat (High Irradiation to Materials) is a new facility under construction at CERN designed to provide high-intensity pulsed beams to an irradiation area where material samples as well as accelerator component assemblies can be tested. The facility uses a 440 GeV proton beam extracted from the CERN SPS with a pulse length of 7.2 μs,  to a maximum pulse energy of 3.4 MJ. In addition to protons, ion beams with an energy of  173.5 GeV/nucleon and a total pulse energy of 21 kJ can be used. The facility is expected to become operational in autumn 2011. The first tests will include candidate materials and prototype assemblies of LHC collimators foreseen to operate at the ultimate LHC beam powers. Experiments on beam windows and high-power target material options, such as tungsten powder, are also planned. The paper will describe the layout and design parameters for the facility and the way experiments can be operated. Ideas on online and post-irradiation tests and instrumentation will be outlined.  
 
TUPS059 SPS WANF Dismantling: A Large Scale-Decommissioning Project at CERN 1668
 
  • S. Evrard, Y. Algoet, N. Conan, D. DePaoli, I. Efthymiopoulos, S. Fumey, H. Gaillard, J.L. Grenard, D. Grenier, A. Pardons, E. Paulat, Y.D.R. Seraphin, M. Tavlet, C. Theis, H. Vincke
    CERN, Geneva, Switzerland
 
  The operation of the SPS (Super Proton Synchrotron) West Area Neutrino Facility (WANF) was halted in 1998. In 2010 a large scale-decommissioning of this facility was conducted. Besides CERN’s commitment to remove non-operational facilities, the additional motivation was the use of the installation (underground tunnels and available infrastructure) for the new HiRadMat facility, which is designed to study the impact of high-intensity pulsed beams on accelerator components and materials. The removal of 800 tons of radioactive equipment and the waste management according to the ALARA (As Low As Reasonably Achievable) principles were two major challenges. This paper describes the solutions implemented and the lessons learnt confirming that the decommissioning phase of a particle accelerator must be carefully studied as from the design stage.  
 
WEPZ031 Accelerator Studies on a Possible Experiment on Proton-driven Plasma Wakefields at CERN 2832
 
  • R.W. Assmann, I. Efthymiopoulos, S.D. Fartoukh, G. Geschonke, B. Goddard, C. Heßler, S. Hillenbrand, M. Meddahi, S. Roesler, F. Zimmermann
    CERN, Geneva, Switzerland
  • A. Caldwell, G.X. Xia
    MPI-P, München, Germany
  • P. Muggli
    MPI, Muenchen, Germany
 
  There has been a proposal by Caldwell et al to use proton beams as drivers for high energy linear colliders. An experimental test with CERN's proton beams is being studied. Such a test requires a transfer line for transporting the beam to the experiment, a focusing section for beam delivery into the plasma, the plasma cell and a downstream beam section for measuring the effects from the plasma and safe disposal of the beam. The work done at CERN towards the conceptual layout and design of such a test area is presented. A possible development of such a test area into a CERN test facility for high-gradient acceleration experiments is discussed.  
 
THPS051 Development of Fragmented Low-Z Ion Beams for the NA61 Fixed-target Experiment at the CERN SPS 3541
 
  • I. Efthymiopoulos, O.E. Berrig, T. Bohl, H. Breuker, M. Calviani, S. Cettour-Cave, K. Cornelis, D. Manglunki, S. Mataguez, S. Maury, J. Spanggaard, C. Valderanis
    CERN, Geneva, Switzerland
  • Z. Fodor
    KFKI, Budapest, Hungary
  • M. Gazdzicki
    IKF, Frankfurt-am-Main, Germany
  • F. Gouber, A. Ivashkin
    RAS/INR, Moscow, Russia
  • P. Seyboth
    MPI-P, München, Germany
  • H. Stroebele
    IAP, Frankfurt am Main, Germany
 
  The NA61 experiment, aims to study the properties of the onset of deconfinement at low SPS energies and to find signatures of the critical point of strongly interacting matter. A broad range in T-μB phase diagram will be covered by performing an energy (13A-158A GeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La) scan. In a first phase, fragmented ion beams of 7Be or 11C produced as secondaries with the same momentum per nucleon when the incident primary Pb-ion beam hits a thin Be target will be used. The H2 beam line that transports the beam to the experiment acts as a double spectrometer which combined with a new thin target (degrader) where fragments loose energy proportional to the square of their charge allows the separation of the wanted A/Z fragments. Thin scintillators and TOF measurement for the low energy points are used as particle identification devices. In this paper results from the first test of the fragmented ion beam done in 2010 will be presented showing that a pure Be beam can be obtained satisfying the needs of the experiment.  
 
THPS053 Results from the HiRadMat Primary Beam Line Commissioning 3547
 
  • C. Heßler, M. Arruat, J. Bauche, K. Bestmann, J. Blanco, N. Conan, K. Cornelis, I. Efthymiopoulos, H. Gaillard, B. Goddard, D. Grenier, G.G. Gros, A. Habert, L.K. Jensen, V. Kain, G. Le Godec, M. Meddahi, S. Pelletier, P. Pepinster, B. Puccio, C. Theis, P. Trilhe, G. Vandoni, J. Wenninger
    CERN, Geneva, Switzerland
 
  The High Radiation to Materials facility (HiRadMat) is a new experimental area at CERN, for studies of the impact of high-intensity pulsed beams on accelerator components and materials. The beam is delivered from the SPS by a new primary beam line, which has been constructed during the 2010/11 winter technical stop. The paper summarizes the construction phase and describes the results from the beam line commissioning in spring 2011. Beam parameter and aperture measurements are presented, as well as steering tests. A special emphasis has been put on the handling of the exceptionally flexible beam line optics in the control system.