ICALEPCS2011 - List of Authors (Gigante, J.V.)

Paper

Title

Page

A Bottom-up Approach to Automatically Configured Tango Control Systems.

239

S. Rubio-Manrique, D.B. Beltrán, I. Costa, D.F.C. Fernández-Carreiras, J.V. Gigante, J. Klora, O. Matilla, R. Ranz, J. Ribas, O. Sanchez
CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain

Alba maintains a central repository, so called "Cabling and Controls database" (CCDB), which keeps the inventory of equipment, cables, connections and their configuration and technical specifications. The valuable information kept in this MySQL database enables some tools to automatically create and configure Tango devices and other software components of the control systems of Accelerators, beamlines and laboratories. This paper describes the process involved in this automatic setup.

Poster MOPMN003 [0.922 MB]

MOPMU006

The Commissioning of the Control System of the Accelerators and Beamlines at the Alba Synchrotron

432

D.F.C. Fernández-Carreiras, F. Becheri, S. Blanch, A. Camps, T.M. Coutinho, G. Cuní, J.V. Gigante, J.J. Jamroz, J. Klora, J. Lidón-Simon, O. Matilla, J. Metge, A. Milán, J. Moldes, R. Montaño, M. Niegowski, C. Pascual-Izarra, S. Pusó, Z. Reszela, A. Rubio, S. Rubio-Manrique, A. Ruz
CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain

Alba is a third generation synchrotron located near Barcelona in Spain. The final commissioning of all accelerators and beamlines started the 8th of March 2011. The Alba control system is based on the middle layer and tools provided by TANGO. It extensively uses the Sardana Framework, including the Taurus graphical toolkit, based on Python and Qt. The control system of Alba is highly distributed. The design choices made five years ago, have been validated during the commissioning. Alba uses extensively Ethernet as a Fieldbus, and combines diskless machines running Tango on Linux and Windows, with specific hardware based in FPGA and fiber optics for fast real time transmissions and synchronizations. B&R PLCs, robust, reliable and cost-effective are widely used in the different components of the machine protection system. In order to match the requirements in terms of speed, these PLCs are sometimes combined with the MRF Timing for the fast interlocks. This paper describes the design, requirements, challenges and the lessons learnt in the installation and commissioning of the control system.

Poster MOPMU006 [24.241 MB]

WEPMS025

Low Current Measurements at ALBA

1032

J. Lidón-Simon, D.F.C. Fernández-Carreiras, J.V. Gigante, J.J. Jamroz, J. Klora, O. Matilla
CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain

High accuracy low current readout is an extensively demanded technique in 3rd generation synchrotrons. Whether reading from scintillation excited large-area photodiodes for beam position measurement or out of gold meshes or metallic coated surfaces in drain-current based intensity monitors, low current measurement devices are an ubiquitous need both for diagnostics and data acquisition in today's photon labs. In order to tackle the problem of measuring from various sources of different nature and magnitude synchronously, while remaining flexible at the same time, ALBA has developed a 4 independent channel electrometer. It is based on transimpedance amplifiers and integrates high resolution ADC converters and an 10/100 Base-T Ethernet communication port. Each channel has independently configurable range, offset and low pass filter cut-off frequency settings and the main unit has external I/O to synchronize the data acquisition with the rest of the control system.

Poster WEPMS025 [0.797 MB]

Paper	Title	Page
MOPMN003	A Bottom-up Approach to Automatically Configured Tango Control Systems.	239
	S. Rubio-Manrique, D.B. Beltrán, I. Costa, D.F.C. Fernández-Carreiras, J.V. Gigante, J. Klora, O. Matilla, R. Ranz, J. Ribas, O. Sanchez CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain
	Alba maintains a central repository, so called "Cabling and Controls database" (CCDB), which keeps the inventory of equipment, cables, connections and their configuration and technical specifications. The valuable information kept in this MySQL database enables some tools to automatically create and configure Tango devices and other software components of the control systems of Accelerators, beamlines and laboratories. This paper describes the process involved in this automatic setup.
	Poster MOPMN003 [0.922 MB]

MOPMU006	The Commissioning of the Control System of the Accelerators and Beamlines at the Alba Synchrotron	432
	D.F.C. Fernández-Carreiras, F. Becheri, S. Blanch, A. Camps, T.M. Coutinho, G. Cuní, J.V. Gigante, J.J. Jamroz, J. Klora, J. Lidón-Simon, O. Matilla, J. Metge, A. Milán, J. Moldes, R. Montaño, M. Niegowski, C. Pascual-Izarra, S. Pusó, Z. Reszela, A. Rubio, S. Rubio-Manrique, A. Ruz CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain
	Alba is a third generation synchrotron located near Barcelona in Spain. The final commissioning of all accelerators and beamlines started the 8th of March 2011. The Alba control system is based on the middle layer and tools provided by TANGO. It extensively uses the Sardana Framework, including the Taurus graphical toolkit, based on Python and Qt. The control system of Alba is highly distributed. The design choices made five years ago, have been validated during the commissioning. Alba uses extensively Ethernet as a Fieldbus, and combines diskless machines running Tango on Linux and Windows, with specific hardware based in FPGA and fiber optics for fast real time transmissions and synchronizations. B&R PLCs, robust, reliable and cost-effective are widely used in the different components of the machine protection system. In order to match the requirements in terms of speed, these PLCs are sometimes combined with the MRF Timing for the fast interlocks. This paper describes the design, requirements, challenges and the lessons learnt in the installation and commissioning of the control system.
	Poster MOPMU006 [24.241 MB]

WEPMS025	Low Current Measurements at ALBA	1032
	J. Lidón-Simon, D.F.C. Fernández-Carreiras, J.V. Gigante, J.J. Jamroz, J. Klora, O. Matilla CELLS-ALBA Synchrotron, Cerdanyola del Vallès, Spain
	High accuracy low current readout is an extensively demanded technique in 3rd generation synchrotrons. Whether reading from scintillation excited large-area photodiodes for beam position measurement or out of gold meshes or metallic coated surfaces in drain-current based intensity monitors, low current measurement devices are an ubiquitous need both for diagnostics and data acquisition in today's photon labs. In order to tackle the problem of measuring from various sources of different nature and magnitude synchronously, while remaining flexible at the same time, ALBA has developed a 4 independent channel electrometer. It is based on transimpedance amplifiers and integrates high resolution ADC converters and an 10/100 Base-T Ethernet communication port. Each channel has independently configurable range, offset and low pass filter cut-off frequency settings and the main unit has external I/O to synchronize the data acquisition with the rest of the control system.
	Poster WEPMS025 [0.797 MB]