A. Gatera, J. Belmans, S. Boussa, F. Davin, W. De Cock, V.R.A. De florio, F. Doucet, L. Parez, F. Pompon, A. Ponton, D. Vandeplassche, E. Verhagen
SCK•CEN, Mol, Belgium
Dr. Ben Abdillah, C. Joly, L. Perrot
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
F. Bouly, E. Froidefond, A. Plaçais
LPSC, Grenoble Cedex, France
H. Podlech
IAP, Frankfurt am Main, Germany
J. Tamura
JAEA/J-PARC, Tokai-mura, Japan
C. Zhang
GSI, Darmstadt, Germany
The MYRRHA project at SCK•CEN, Belgium, aims at coupling a 600 MeV proton accelerator to a subcritical fission core operating at a thermal power of 60 MW. The nominal proton beam for this ADS has an intensity of 4 mA and is delivered in a quasi-CW mode. MYRRHA’s linac is designed to be fault tolerant thanks to redundancy implemented in parallel at low energy and serially in the superconducting linac. Phase 1 of the project, named MINERVA, will realise a 100 MeV, 4 mA superconducting linac with the mission of demonstrating the ADS requirements in terms of reliability and of fault tolerance. As part of the reliability optimisation program the integrated prototyping of the MINERVA injector is ongoing at SCK•CEN in Louvain-la-Neuve, Belgium. The injector test stand aims at testing sequentially all the elements composing the front-end of the injector. This contribution will highlight the beam dynamics choices in MINERVA’s injector and their impact on ongoing commissioning activities. *angelique.gatera@sckcen.be
Right click on video for Picture-in-Picture mode or Full screen display.
L. Bellan, L. Antoniazzi, M. Comunian, E. Fagotti, M.G. Giacchini, F. Grespan, M. Montis, A. Palmieri, A. Pisent, M. Poggi
INFN/LNL, Legnaro (PD), Italy
T. Akagi, K. Kondo, K. Masuda, M. Sugimoto
QST, Aomori, Japan
B. Bolzon, N. Chauvin
CEA-IRFU, Gif-sur-Yvette, France
P. Cara, F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan
Y. Carin, H. Dzitko
F4E, Germany
D. Jimenez-Rey, I. Podadera
CIEMAT, Madrid, Spain
J. Marroncle
CEA-DRF-IRFU, France
I. Moya
Fusion for Energy, Garching, Germany
The Linear IFMIF Prototype Accelerator (LIPAc) is a high intensity D⁺ linear accelerator; demonstrator of the International Fusion Material Irradiation Facility (IFMIF). In summer 2019 the IFMIF/EVEDA Radio Frequency Quadrupole (RFQ) accelerated its nominal 125 mA deuteron (D⁺) beam current up to 5 MeV, with >90% transmission for pulses of 1 ms at 1 Hz, reaching its nominal beam dynamics goal. The paper presents the benchmark simulations and measurements performed to characterize the as-built RFQ performances, in the low and high perveance regime. In this framework, the commissioning strategy with a particular focus on the reciprocal effects of the low-medium energy transfers lines and the RFQ is also discussed. In the last part of the paper, the future commissioning outlooks are briefly introduced.
N. Milas, C.S. Derrez, E.M. Donegani, M. Eshraqi, B. Gålander, H. Hassanzadegan, E. Laface, Y. Levinsen, R. Miyamoto, M. Muñoz, E. Nilsson, D.C. Plostinar, A.G. Sosa, R. Tarkeshian, C.A. Thomas
ESS, Lund, Sweden
The European Spallation Source, currently under construction in Lund, Sweden, will be the brightest spallation neutron source in the world, when the proton linac driver achieves the design power of 5 MW at 2 GeV beam energy. Such a high power requires production, efficient acceleration, and transport of a high current proton beam with minimal loss. This implies in a challenging design and beam commissioning of this machine. The linac features a long pulse length of 2.86 ms at a relatively low repetition late of 14 Hz. The ESS ion source and low energy beam transport are in-kind contributions from INFN-LNS. Beam commissioning of this section started in September 2018 and continued until early July in 2019. This article presents highlights from a campaign of beam characterizations and optimizations during this beam commissioning stage.
