Bellodi, G.

Paper	Title	Page
MOPCH111	A Fast Beam Chopper for the RAL Front End Test Stand	300
	M.A. Clarke-Gayther CCLRC/RAL/ASTeC, Chilton, Didcot, Oxon G. Bellodi, F. Gerigk CERN, Geneva
	The FETS project at RAL will test a fast beam chopper, designed to address the requirements of high power proton drivers for next generation pulsed spallation sources and neutrino factories. A description is given of the novel RAL 'Fast - Slow' chopping scheme, and of candidate optical designs for the 3.0 MeV, 60 mA, H- Medium Energy Beam Transport (MEBT) line.
MOPLS007	Monitoring Heavy-ion Beam Losses in the LHC	544
	R. Bruce, G. Bellodi, H.-H. Braun, S.S. Gilardoni, J.M. Jowett CERN, Geneva
	The LHC beam loss monitor (BLM) system, primarily designed for proton operation, will survey particle losses and dump the beam if the loss rate exceeds a threshold expected to induce magnet quenches. Simulations of beam losses in the full magnet geometry allow us to compare the response of the BLMs to ion and proton losses and establish preliminary loss thresholds for quenches. Further simulations of beam losses caused by collimation and electromagnetic interactions peculiar to heavy ion collisions determine the positions of extra BLMs needed for ion operation in the LHC.
TUODFI01	The Final Collimation System for the LHC	986
	R.W. Assmann, O. Aberle, G. Bellodi, A. Bertarelli, C.B. Bracco, H.-H. Braun, M. Brugger, S. Calatroni, R. Chamizo, A. Dallocchio, B. Dehning, A. Ferrari, P. Gander, A. Grudiev, E.B. Holzer, J.-B. Jeanneret, J.M. Jimenez, M. Jonker, Y. Kadi, K. Kershaw, J. Lendaro, J. Lettry, R. Losito, M. Magistris, A.M. Masi, M. Mayer, E. Métral, R. Perret, C. Rathjen, S. Redaelli, G. Robert-Demolaize, S. Roesler, F. Ruggiero, M. Santana-Leitner, P. Sievers, M. Sobczak, E. Tsoulou, V. Vlachoudis, Th. Weiler CERN, Geneva I. Baishev, I.L. Kurochkin IHEP Protvino, Protvino, Moscow Region
	The LHC collimation system has been re-designed over the last three years in order to address the unprecedented challenges that are faced with the 360 MJ beams at 7 TeV. The layout of the LHC has now been fixed and a final approach for collimation and cleaning has been adopted. In total 132 collimator locations have been reserved in the two LHC rings and can be installed in a phased approach. Ninety collimators of five different types will be available for initial beam operation. The system has been fully optimized for avoiding quenches of super-conducting magnets during beam losses and for sufficient survival of beamline components against radioactive dose. The phased approach for LHC collimation is described, the various collimators and their functionalities are explained, and the expected system performance is summarized.
	Transparencies
TUPLS057	Linac4, a New Injector for the CERN PS Booster	1624
	R. Garoby, G. Bellodi, F. Gerigk, K. Hanke, A.M. Lombardi, M. Pasini, C. Rossi, E.Zh. Sargsyan, M. Vretenar CERN, Geneva
	The first bottle-neck towards higher beam brightness in the LHC injector chain is due to space charge induced tune spread at injection in the CERN PS Booster (PSB). A new injector called Linac4 is proposed to remove this limitation. Using RF cavities at 352 and 704 MHz, it will replace the present 50 MeV proton Linac2, and deliver a 160 MeV, 40 mA H beam. The higher injection energy will reduce space charge effects by a factor of 2, and charge exchange will drastically reduce the beam losses at injection. Operation will be simplified and the beam brightness required for the LHC ultimate luminosity should be obtained at PS ejection. Moreover, for the needs of non-LHC physics experiments like ISOLDE, the number of protons per pulse from the PSB will increase by a significant factor. This new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios, which can also become the low energy part of a future 3.5 GeV, multi-megawatt superconducting linac (SPL). The present design has benefited from the support of the French CEA and IN2P3, of the European Union and of the ISTC (Moscow). The proposed machine and its layout on the CERN site are described.