Paper |
Title |
Page |
TUX01 |
Status of the Electron Cooler for NICA Booster and Results of its Commissioning |
22 |
|
- M.I. Bryzgunov, E.A. Bekhtenev, A.V. Bubley, V.A. Chekavinskiy, A.P. Denisov, A.D. Goncharov, I.A. Gusev, G.V. Karpov, M.N. Kondaurov, N.S. Kremnev, V.M. Panasyuk, V.V. Parkhomchuk, V.A. Polukhin, A.A. Putmakov, V.B. Reva, D.V. Senkov, A.A. Zharikov
BINP SB RAS, Novosibirsk, Russia
- A.G. Kobets, S.A. Melnikov, I.N. Meshkov, O. Orlov, S.V. Semenov, A.S. Sergeev, A.A. Sidorin, A.V. Smirnov
JINR, Dubna, Moscow Region, Russia
- V.B. Reva
NSU, Novosibirsk, Russia
|
|
|
The electron cooling system of the NICA booster is intended for accumulation of the ion beam at the injection energy and for cooling at some intermediate energy value before acceleration to the extraction energy. The system was produced in BINP (Novosibirsk, Russia) and commissioned in the JINR (Dubna, Russia) in 2019. The current status of the electron cooler and the results of its tests are presented in the article.
|
|
|
Slides TUX01 [12.559 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-COOL2019-TUX01
|
|
About • |
paper received ※ 09 October 2019 paper accepted ※ 18 October 2019 issue date ※ 01 November 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THX01 |
The Status of the Electron Cooling System for the NICA Collider |
55 |
|
- V.V. Parkhomchuk, M.I. Bryzgunov, A.V. Bubley, A.P. Denisov, A.D. Goncharov, N.S. Kremnev, V.M. Panasyuk, A.A. Putmakov, V.B. Reva, S.V. Shiyankov
BINP SB RAS, Novosibirsk, Russia
- V.B. Reva
NSU, Novosibirsk, Russia
|
|
|
New electron cooling system is designed to cool two heavy ion beams propagating in opposite directions at a distance about 30 cm from each other. Engineering solutions for its basic elements are presented. The measurements of the electron cooler magnetic system and the influence of the adjacent solenoids in the cooling section on the resulting magnetic field are described. The potential opportunities to improve parameters of the experiments with ion beams using the electron cooling system are discussed.
|
|
|
Slides THX01 [20.679 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-COOL2019-THX01
|
|
About • |
paper received ※ 04 October 2019 paper accepted ※ 18 October 2019 issue date ※ 01 November 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPS13 |
The Cascade Transformer for the High-Voltage Electron Cooling System for the NICA Collider |
105 |
|
- A.P. Denisov, M.I. Bryzgunov, A.D. Goncharov, V.V. Parkhomchuk, V.B. Reva, D.N. Skorobogatov
BINP SB RAS, Novosibirsk, Russia
|
|
|
The 2.5 MeV electron cooling system for the NICA collider (JINR, Dubna) will use cascade transformers for distributing the power among the sections of the high-voltage column and for transferring power to the high-voltage terminal. The design of the cascade transformer and the measurements of its prototype are described.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-COOL2019-TUPS13
|
|
About • |
paper received ※ 09 October 2019 paper accepted ※ 21 October 2019 issue date ※ 01 November 2019 |
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|