SRF2015 - List of Authors (Premo, K.)

Paper	Title	Page
TUPB110	LCLS-II 1.3 GHz Design Integration for Assembly and Cryomodule Assembly Facility Readiness at Fermilab	893
	T.T. Arkan, C.M. Ginsburg, Y. He, J.A. Kaluzny, Y.O. Orlov, T.J. Peterson, K. Premo Fermilab, Batavia, Illinois, USA
	Funding: DOE LCLS-II is a planned upgrade project for the linear coherent light source (LCLS) at Stanford Linear Accelerator Center (SLAC). The LCLS-II linac will consist of thirty-five 1.3 GHz and two 3.9 GHz superconducting RF continuous wave (CW) cryomodules that Fermilab and Jefferson Lab will assemble in collaboration with SLAC. The LCLS-II 1.3 GHz cryomodule design is based on the European XFEL pulsed-mode cryomodule design with modifications needed for CW operation. Both Fermilab and Jefferson Lab will each assemble and test a prototype 1.3 GHz cryomodule to assess the results of the CW modifications. After prototype cryomodule tests, both laboratories will increase cryomodule production rate to meet the challenging LCLS-II project installation schedule requirements of approximately one cryomodule per month per laboratory. This paper presents the 1.3 GHz CW cryomodule design integration for assembly at Fermilab, Fermilab Cryomodule Assembly Facility (CAF) infrastructure modifications for the LCLS-II cryomodules, and readiness for the required assembly throughput.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB077	Modified TTF3 Couplers for LCLS-II	1306
	C. Adolphsen, K. Fant, Z. Li, C.D. Nantista, G. Stupakov, J. Tice, F.Y. Wang, L. Xiao SLAC, Menlo Park, California, USA I.V. Gonin, K. Premo, N. Solyak Fermilab, Batavia, Illinois, USA
	The LCLS-II 4 GeV SC electron linac will use 280 TESLA cavities and TTF3 couplers, modified for CW operation with input power up to about 7 kW. The coupler modifications include shortening the antenna to achieve higher Qext and thickening the copper plating on the warm section inner conductor to lower the peak temperature. Another change is the use a waveguide transition box that is machined out of a solid piece of aluminum, significantly reducing its cost and improving its fit to the warm coupler window section. This paper describes the changes, simulations of the coupler operation (heat loads and temperatures), rf processing results and CW tests with LCLS-II dressed cavities.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

LCLS-II 1.3 GHz Design Integration for Assembly and Cryomodule Assembly Facility Readiness at Fermilab

893

T.T. Arkan, C.M. Ginsburg, Y. He, J.A. Kaluzny, Y.O. Orlov, T.J. Peterson, K. Premo
Fermilab, Batavia, Illinois, USA

Funding: DOE
LCLS-II is a planned upgrade project for the linear coherent light source (LCLS) at Stanford Linear Accelerator Center (SLAC). The LCLS-II linac will consist of thirty-five 1.3 GHz and two 3.9 GHz superconducting RF continuous wave (CW) cryomodules that Fermilab and Jefferson Lab will assemble in collaboration with SLAC. The LCLS-II 1.3 GHz cryomodule design is based on the European XFEL pulsed-mode cryomodule design with modifications needed for CW operation. Both Fermilab and Jefferson Lab will each assemble and test a prototype 1.3 GHz cryomodule to assess the results of the CW modifications. After prototype cryomodule tests, both laboratories will increase cryomodule production rate to meet the challenging LCLS-II project installation schedule requirements of approximately one cryomodule per month per laboratory. This paper presents the 1.3 GHz CW cryomodule design integration for assembly at Fermilab, Fermilab Cryomodule Assembly Facility (CAF) infrastructure modifications for the LCLS-II cryomodules, and readiness for the required assembly throughput.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB077

Modified TTF3 Couplers for LCLS-II

1306

C. Adolphsen, K. Fant, Z. Li, C.D. Nantista, G. Stupakov, J. Tice, F.Y. Wang, L. Xiao
SLAC, Menlo Park, California, USA
I.V. Gonin, K. Premo, N. Solyak
Fermilab, Batavia, Illinois, USA

The LCLS-II 4 GeV SC electron linac will use 280 TESLA cavities and TTF3 couplers, modified for CW operation with input power up to about 7 kW. The coupler modifications include shortening the antenna to achieve higher Qext and thickening the copper plating on the warm section inner conductor to lower the peak temperature. Another change is the use a waveguide transition box that is machined out of a solid piece of aluminum, significantly reducing its cost and improving its fit to the warm coupler window section. This paper describes the changes, simulations of the coupler operation (heat loads and temperatures), rf processing results and CW tests with LCLS-II dressed cavities.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)