SRF2015 - List of Authors (Mueller, C.)

Paper	Title	Page
MOPB076	Horizontal RF Test of a Fully Equipped 3.9 GHz Cavity for the European XFEL in the DESY AMTF	301
	C.G. Maiano, C. Albrecht, R. Bospflug, J. Branlard, Ł. Butkowski, T. Delfs, J. Eschke, A. Gössel, F. Hoffmann, M. Hüning, K. Jensch, R. Jonas, R. Klos, D. Kostin, W. Maschmann, A. Matheisen, U. Mavrič, W.-D. Möller, C. Müller, K. Mueller, B. Petersen, P. Pierini, J. Rothenburg, O. Sawlanski, M. Schmökel, A.A. Sulimov, E. Vogel DESY, Hamburg, Germany A. Bosotti, M. Moretti, R. Paparella, P. Pierini, D. Sertore INFN/LASA, Segrate (MI), Italy E.R. Harms Fermilab, Batavia, Illinois, USA C.R. Montiel ANL, Argonne, Illinois, USA S. Pivovarov BINP SB RAS, Novosibirsk, Russia
	In order to validate the cavity package concept before the module preparation for the European XFEL Injector, one 3.9 GHz cavity, complete with magnetic shielding, power coupler and frequency tuner was tested in a specially designed single cavity cryomodule in one of the caves of the DESY Accelerator Module Test Facility (AMTF). The cavity was tested in high power pulsed operation up to the quench limit of 24 MV/m, above the vertical test qualifications and all subsystems under test (coupler, tuner, waveguide tuners, LLRF system) were qualified to design performances.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB018	Preparation of the 3.9 GHz System for the European XFEL Injector Commissioning	584
	P. Pierini, M. Bertucci, M. Bonezzi, A. Bosotti, J.F. Chen, M. Chiodini, P. Michelato, L. Monaco, M. Moretti, R. Paparella, D. Sertore INFN/LASA, Segrate (MI), Italy C. Albrecht, N. Baboi, S. Barbanotti, J. Branlard, Th. Buettner, Ł. Butkowski, T. Delfs, H. Hintz, F. Hoffmann, M. Hüning, K. Jensch, R. Jonas, R. Klos, D. Kostin, L. Lilje, C.G. Maiano, W. Maschmann, A. Matheisen, U. Mavrič, W.-D. Möller, C. Müller, P. Pierini, J. Prenting, J. Rothenburg, O. Sawlanski, M. Schlösser, M. Schmökel, A.A. Sulimov, E. Vogel DESY, Hamburg, Germany E.R. Harms Fermilab, Batavia, Illinois, USA C.R. Montiel ANL, Argonne, Illinois, USA C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	The 3.9 GHz cryomodule and RF system for the XFEL Injector is being assembled and delivered to the underground building in summer 2015, for the injector commissioning in Fall 2015. This contribution outlines the status of the activity and reports the preparation stages of the technical commissioning of the system.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB031	Operation Experience with Half Cell Measurement Machine and Cavity Tuning Machine in 3 Years of European XFEL Cavity Series Production	1149
	J.H. Thie, A. Gössel, J. Iversen, D. Klinke, C. Müller, A.A. Sulimov, D. Tischhauser DESY, Hamburg, Germany
	For the European XFEL superconducting Cavity series production at both cavity vendors’ four manufacturing machines for production key functions, HAZEMEMA and CTM, are supplied by DESY. Among three years of cavity production in two companies a lot of experience is gathered about influence of surroundings and production quality on cycle times, machine drop outs, general stability time of machines and parts subject to wear. Significant factors on cycle time for tuning operation like temperature stability and drift during tuning and measurements, precision of cell trimming before welding and tuning and generally geometrical factors are shown. RF aspects of tuning and production quality control as additional measurements for TM011-mode to estimate quality of its damping is presented. Performed full Cavity RF measurements exceeds XFEL specifications gives a possibility for additional quality control on welding shrinkage stability and it’s homogeneously distribution. The use of HAZEMEMA and CTM to assess the impact of asymmetric trimming, including calculation of it’s influence on the higher-order modes, is shown.
	Poster THPB031 [0.201 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Horizontal RF Test of a Fully Equipped 3.9 GHz Cavity for the European XFEL in the DESY AMTF

301

C.G. Maiano, C. Albrecht, R. Bospflug, J. Branlard, Ł. Butkowski, T. Delfs, J. Eschke, A. Gössel, F. Hoffmann, M. Hüning, K. Jensch, R. Jonas, R. Klos, D. Kostin, W. Maschmann, A. Matheisen, U. Mavrič, W.-D. Möller, C. Müller, K. Mueller, B. Petersen, P. Pierini, J. Rothenburg, O. Sawlanski, M. Schmökel, A.A. Sulimov, E. Vogel
DESY, Hamburg, Germany
A. Bosotti, M. Moretti, R. Paparella, P. Pierini, D. Sertore
INFN/LASA, Segrate (MI), Italy
E.R. Harms
Fermilab, Batavia, Illinois, USA
C.R. Montiel
ANL, Argonne, Illinois, USA
S. Pivovarov
BINP SB RAS, Novosibirsk, Russia

In order to validate the cavity package concept before the module preparation for the European XFEL Injector, one 3.9 GHz cavity, complete with magnetic shielding, power coupler and frequency tuner was tested in a specially designed single cavity cryomodule in one of the caves of the DESY Accelerator Module Test Facility (AMTF). The cavity was tested in high power pulsed operation up to the quench limit of 24 MV/m, above the vertical test qualifications and all subsystems under test (coupler, tuner, waveguide tuners, LLRF system) were qualified to design performances.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB018

Preparation of the 3.9 GHz System for the European XFEL Injector Commissioning

584

P. Pierini, M. Bertucci, M. Bonezzi, A. Bosotti, J.F. Chen, M. Chiodini, P. Michelato, L. Monaco, M. Moretti, R. Paparella, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Albrecht, N. Baboi, S. Barbanotti, J. Branlard, Th. Buettner, Ł. Butkowski, T. Delfs, H. Hintz, F. Hoffmann, M. Hüning, K. Jensch, R. Jonas, R. Klos, D. Kostin, L. Lilje, C.G. Maiano, W. Maschmann, A. Matheisen, U. Mavrič, W.-D. Möller, C. Müller, P. Pierini, J. Prenting, J. Rothenburg, O. Sawlanski, M. Schlösser, M. Schmökel, A.A. Sulimov, E. Vogel
DESY, Hamburg, Germany
E.R. Harms
Fermilab, Batavia, Illinois, USA
C.R. Montiel
ANL, Argonne, Illinois, USA
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

The 3.9 GHz cryomodule and RF system for the XFEL Injector is being assembled and delivered to the underground building in summer 2015, for the injector commissioning in Fall 2015. This contribution outlines the status of the activity and reports the preparation stages of the technical commissioning of the system.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB031

Operation Experience with Half Cell Measurement Machine and Cavity Tuning Machine in 3 Years of European XFEL Cavity Series Production

1149

J.H. Thie, A. Gössel, J. Iversen, D. Klinke, C. Müller, A.A. Sulimov, D. Tischhauser
DESY, Hamburg, Germany

For the European XFEL superconducting Cavity series production at both cavity vendors’ four manufacturing machines for production key functions, HAZEMEMA and CTM, are supplied by DESY. Among three years of cavity production in two companies a lot of experience is gathered about influence of surroundings and production quality on cycle times, machine drop outs, general stability time of machines and parts subject to wear. Significant factors on cycle time for tuning operation like temperature stability and drift during tuning and measurements, precision of cell trimming before welding and tuning and generally geometrical factors are shown. RF aspects of tuning and production quality control as additional measurements for TM011-mode to estimate quality of its damping is presented. Performed full Cavity RF measurements exceeds XFEL specifications gives a possibility for additional quality control on welding shrinkage stability and it’s homogeneously distribution. The use of HAZEMEMA and CTM to assess the impact of asymmetric trimming, including calculation of it’s influence on the higher-order modes, is shown.

Poster THPB031 [0.201 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)