SRF2015 - List of Authors (Montesinos, E.)

Paper	Title	Page
TUBA01	Status of the SRF Systems at HIE-ISOLDE	481
	W. Venturini Delsolaro, L. Arnaudon, K. Artoos, C. Bertone, J.A. Bousquet, N. Delruelle, M. Elias, J.A. Ferreira Somoza, F. Formenti, J. Gayde, J.L. Grenard, Y. Kadi, G. Kautzmann, Y. Leclercq, M. Mician, A. Miyazaki, E. Montesinos, V. Parma, G.J. Rosaz, K.M. Schirm, E. Siesling, A. Sublet, M. Therasse, L. Valdarno, D. Valuch, G. Vandoni, L.R. Williams, P. Zhang CERN, Geneva, Switzerland
	The HIE-ISOLDE project has been approved by CERN in 2009 and gained momentum after 2011. The final energy goal of the upgrade is to boost the radioactive beams of REX-ISOLDE from the present 3 MeV/u up to 10 MeV/u for A/q up to 4.5. This is to be achieved by means of a new superconducting linac, operating at 101.28 MHz and 4.5 K with independently phased quarter wave resonators (QWR). The QWRs are based on the Nb sputtering on copper technology, pioneered at CERN and developed at INFN-LNL for this cavity shape. Transverse focusing is provided by Nb-Ti superconducting solenoids. The cryomodules hosting the active elements are of the common vacuum type. In this contribution we will report on the recent advancements of the HIE-ISOLDE linac technical systems involving SRF technology. The paper is focused on the cavity production, on the experience with the assembly of the first cryomodule (CM1), and on the results of the first hardware commissioning campaign.
	Slides TUBA01 [27.129 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB081	FPC and HOM Coupler Test Boxes for HL-LHC Crab Cavities	1321
	A.R.J. Tutte, G. Burt Cockcroft Institute, Lancaster University, Lancaster, United Kingdom R. Calaga, A. Macpherson, E. Montesinos CERN, Geneva, Switzerland S.U. De Silva ODU, Norfolk, Virginia, USA Z. Li SLAC, Menlo Park, California, USA B. P. Xiao BNL, Upton, Long Island, New York, USA
	The LHC luminosity upgrade will involve the installation of thirty-two 400 MHz SRF crab cavities. The cavities have two variants known as the RF dipole and double quarter-wave crab cavities. Each cavity has a fundamental power coupler (FPC) at 400 MHz and two or three HOM couplers. Before integration onto the cavities it is necessary to condition the FPC, and to measure the transmission on the HOM couplers at low power to ensure the operate as designed, each requiring a special test box. The FPC test box should provide a high transmission between two couplers without creating high surface fields. The low power HOM test boxes should be terminated to a load such that the natural stop and pass-bands of the couplers are preserved allowing the reflection to me measured and compared to simulations. In addition, due to the possibility of high HOM power in the LHC crab cavities, the concept of creating a broadband high power HOM coupler test box in order to condition and test the couplers at high power has been investigated. The Rf design of all test boxes is presented and discussed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02	Crab Cavity and Cryomodule Development for HL-LHC	1460
	F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni CERN, Geneva, Switzerland S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA K.B. Marinov, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.
	Slides FRBA02 [4.678 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Status of the SRF Systems at HIE-ISOLDE

481

W. Venturini Delsolaro, L. Arnaudon, K. Artoos, C. Bertone, J.A. Bousquet, N. Delruelle, M. Elias, J.A. Ferreira Somoza, F. Formenti, J. Gayde, J.L. Grenard, Y. Kadi, G. Kautzmann, Y. Leclercq, M. Mician, A. Miyazaki, E. Montesinos, V. Parma, G.J. Rosaz, K.M. Schirm, E. Siesling, A. Sublet, M. Therasse, L. Valdarno, D. Valuch, G. Vandoni, L.R. Williams, P. Zhang
CERN, Geneva, Switzerland

The HIE-ISOLDE project has been approved by CERN in 2009 and gained momentum after 2011. The final energy goal of the upgrade is to boost the radioactive beams of REX-ISOLDE from the present 3 MeV/u up to 10 MeV/u for A/q up to 4.5. This is to be achieved by means of a new superconducting linac, operating at 101.28 MHz and 4.5 K with independently phased quarter wave resonators (QWR). The QWRs are based on the Nb sputtering on copper technology, pioneered at CERN and developed at INFN-LNL for this cavity shape. Transverse focusing is provided by Nb-Ti superconducting solenoids. The cryomodules hosting the active elements are of the common vacuum type. In this contribution we will report on the recent advancements of the HIE-ISOLDE linac technical systems involving SRF technology. The paper is focused on the cavity production, on the experience with the assembly of the first cryomodule (CM1), and on the results of the first hardware commissioning campaign.

Slides TUBA01 [27.129 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB081

FPC and HOM Coupler Test Boxes for HL-LHC Crab Cavities

1321

A.R.J. Tutte, G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
R. Calaga, A. Macpherson, E. Montesinos
CERN, Geneva, Switzerland
S.U. De Silva
ODU, Norfolk, Virginia, USA
Z. Li
SLAC, Menlo Park, California, USA
B. P. Xiao
BNL, Upton, Long Island, New York, USA

The LHC luminosity upgrade will involve the installation of thirty-two 400 MHz SRF crab cavities. The cavities have two variants known as the RF dipole and double quarter-wave crab cavities. Each cavity has a fundamental power coupler (FPC) at 400 MHz and two or three HOM couplers. Before integration onto the cavities it is necessary to condition the FPC, and to measure the transmission on the HOM couplers at low power to ensure the operate as designed, each requiring a special test box. The FPC test box should provide a high transmission between two couplers without creating high surface fields. The low power HOM test boxes should be terminated to a load such that the natural stop and pass-bands of the couplers are preserved allowing the reflection to me measured and compared to simulations. In addition, due to the possibility of high HOM power in the LHC crab cavities, the concept of creating a broadband high power HOM coupler test box in order to condition and test the couplers at high power has been investigated. The Rf design of all test boxes is presented and discussed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02

Crab Cavity and Cryomodule Development for HL-LHC

1460

F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
K.B. Marinov, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.

Slides FRBA02 [4.678 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)