• J. Egberts, S.T. Artikova, C.P. Welsch
  MPI-K, Heidelberg
• E. Bravin, T. Lefèvre
  CERN, Geneva
• T. Chapman, M.J. Pilon
  Thermo, Liverpool, New York

A thorough understanding of halo formation and its possible control is highly desirable for essentially all particle accelerators. Limiting the number of particles in the halo region of a beam would allow for minimizing beam losses and maximizing beam transmission, i.e. the experimental output. Measurements based on either optical transition radiation (OTR) or synchrotron radiation (SR) provide an interesting opportunity for high dynamic range measurements of the transverse beam profile, since the signal is linear with the beam charge over a wide range and is routinely used in many diagnostic applications. In this contribution, first results on beam halo measurements obtained from a flexible core masking technique and an innovative CID camera system are summarized.

• A.E. Dabrowski, S. Bettoni, H.-H. Braun, E. Bravin, R. Corsini, S. Döbert, C. Dutriat, T. Lefèvre, M. Olvegård, P.K. Skowronski, F. Tecker
  CERN, Geneva

In the CLIC Test Facility 3 (CTF3), the strong coupling between the beam and the accelerating cavities (full beam loading) induces transient effects such that the head of the pulse is accelerated almost twice as much as the steady-state part of the pulse. The beam optics in the machine is tailored for the steady-state and not for the higher energy electrons, which are gradually lost. This can lead to inefficiency and contributes to the activation of the machine. A beam loading compensation scheme has been proposed to minimize this effect. By delaying appropriately the arrival time of rf pulse in accelerating cavities with respect to the beam, the transient energy can be brought close (to within a few percent) of the steady-state one. This paper presents the measurements done on CTF3 using time resolved energy measurements.