CERN, Geneva, Switzerland
SLAC, Menlo Park, California, USA
Since quite some time, dynamic aperture studies have been undertaken with the aim of specifying the required field quality of the new magnets that will be installed in the LHC ring in the framework of the high-luminosity upgrade. In this paper the latest results concerning the specification work will be presented, taking into account both injection and collision energies and the field quality contribution from all the magnets in the newly designed interaction regions.
JLab, Newport News, Virginia, USA
Northern Illinois University, DeKalb, Illinois, USA
DESY, Hamburg, Germany
SLAC, Menlo Park, California, USA
ODU, Norfolk, Virginia, USA
JINR, Dubna, Russia
Texas A&M University, College Station, Texas, USA
Old Dominion University, Norfolk, Virginia, USA
Science and Technique Laboratory Zaryad, Novosibirsk, Russia
ANL, Argonne, Illinois, USA
The Medium-energy Electron Ion Collider (MEIC) at JLab is designed to provide high luminosity and high polarization needed to reach new frontiers in the exploration of nuclear structure. The luminosity, exceeding 1033 cm-2s−1 in a broad range of the center-of-mass (CM) energy and maximum luminosity above 1034 cm-2s−1, is achieved by high-rate collisions of short small-emittance low-charge bunches made possible by high-energy electron cooling of the ion beam and synchrotron radiation damping of the electron beam. The polarization of light ion species (p, d, 3He) can be easily preserved and manipulated due to the unique figure-8 shape of the collider rings. A fully consistent set of parameters have been developed considering the balance of machine performance, required technical development and cost. This paper reports recent progress on the MEIC accelerator design including electron and ion complexes, integrated interaction region design, figure-8-ring-based electron and ion polarization schemes, RF/SRF systems and ERL-based high-energy electron cooling. Luminosity performance is also presented for the MEIC baseline design.
LBNL, Berkeley, California, USA
SLAC, Menlo Park, California, USA
The microbunching instability has long been recognized as a potential limiting factor to the performance of X-ray FELs. It is of particular relevance in LCLS-II due, in part, to a layout that includes a long bypass beamline between the Linac and the undulators. Here we focus on two aspects of the instability that highlight the importance of 3D effects.
SLAC, Menlo Park, California, USA
Fermilab, Batavia, Illinois, USA
A design of a muon collider ring with the center of mass energy of 6 TeV is presented. The ring circumference is about 6.3 km, and the beta functions at collision point are 1 cm in both planes. The ring linear optics, the non-linear chromaticity correction scheme in the Interaction Region (IR), and the additional non-linear field orthogonal knobs are described in detail. The IR magnet specifications are based on the maximum pole tip field of 20 T in dipoles and 15 T in quadrupoles. The results of the beam dynamics optimization for maximum dynamic aperture are presented.
JLab, Newport News, Virginia, USA
SLAC, Menlo Park, California, USA
The electron collider ring of the Medium-energy Electron-Ion Collider (MEIC) at Jefferson Lab is designed to accumulate and store a high-current polarized electron beam for collisions with an ion beam. We consider a design of the electron collider ring based on reusing PEP-II components, such as magnets, power supplies, vacuum system, etc. This has the potential to significantly reduce the cost and engineering effort needed to bring the project to fruition. This paper reports on an electron ring optics design considering the balance of PEP-II hardware parameters (such as dipole sagitta, magnet field strengths and acceptable synchrotron radiation power) and electron beam quality in terms of equilibrium emittances.
JLab, Newport News, Virginia, USA
SLAC, Menlo Park, California, USA
Texas A&M University, College Station, Texas, USA
We present an update on the design of the ion collider ring of the Medium-energy Electron-Ion Collider (MEIC) proposed by Jefferson Lab. The design is based on the use of super-ferric magnets. It provides the necessary momentum range of 8 to 100 GeV/c for protons and ions, matches the electron collider ring design using PEP-II components, fits readily on the JLab site, offers a straightforward path for a future full-energy upgrade by replacing the magnets with higher-field ones in the same tunnel, and is more cost effective than using presently available current-dominated super-conducting magnets. We describe complete ion collider optics including an independently-designed modular detector region.
SLAC, Menlo Park, California, USA
JLab, Newport News, Virginia, USA
One of the key design features of the Medium-energy Electron-Ion Collider (MEIC) proposed by Jefferson Lab is a small beta function at the interaction point (IP) allowing one to achieve a high luminosity of up to 1034 cm-2s-1. The required strong beam focusing unavoidably causes large chromatic effects such as chromatic tune spread and beam smear at the IP, which need to be compensated. This paper reports recent progress in our development of a chromaticity correction scheme for the ion ring including optimization of dynamic aperture and momentum acceptance.