IPAC2015 - List of Authors (Natsui, T.)

Paper	Title	Page
TUYB1	Progress of SuperKEKB	1291
	T. Miura, T. Abe, T. Adachi, K. Akai, M. Akemoto, A. Akiyama, D.A. Arakawa, Y. Arakida, Y. Arimoto, M. Arinaga, K. Ebihara, K. Egawa, A. Enomoto, J.W. Flanagan, S. Fukuda, H. Fukuma, Y. Funakoshi, K. Furukawa, T. Furuya, K. Hara, T. Higo, H. Hisamatsu, H. Honma, T. Honma, R. Ichimiya, N. Iida, H. Iinuma, H. Ikeda, M. Ikeda, T. Ishibashi, H. Ishii, M. Iwasaki, A. Kabe, T. Kageyama, H. Kaji, K. Kakihara, S. Kamada, T. Kamitani, S. Kanaeda, K. Kanazawa, H. Katagiri, S. Kato, S. Kazama, M. Kikuchi, T. Kobayashi, H. Koiso, Y. Kojima, M. Kurashina, K. Marutsuka, M. Masuzawa, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, F. Miyahara, K. Mori, T. Mori, A. Morita, Y. Morita, H. Nakai, H. Nakajima, T.T. Nakamura, K. Nakanishi, K. Nakao, H. Nakayama, T. Natsui, M. Nishiwaki, J.-I. Odagiri, Y. Ogawa, K. Ohmi, Y. Ohnishi, S. Ohsawa, Y. Ohsawa, N. Ohuchi, K. Oide, T. Oki, M. Ono, H. Sakai, Y. Sakamoto, S. Sasaki, M. Sato, M. Satoh, K. Shibata, T. Shidara, M. Shirai, A. Shirakawa, M. Suetake, Y. Suetsugu, R. Sugahara, H. Sugimoto, T. Suwada, S. Takasaki, T. Takatomi, T. Takenaka, Y. Takeuchi, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, N. Tokuda, K. Tsuchiya, X. Wang, K. Watanabe, H. Yamaoka, Y. Yano, K. Yokoyama, Ma. Yoshida, M. Yoshida, S.I. Yoshimoto, K. Yoshino, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong KEK, Ibaraki, Japan D. Satoh TIT, Tokyo, Japan
	This presentation will cover the status of the installation and the injector commissioning status of SuperKEKB. The IR optics and design with very low β^* of less than 1 mm will be discussed.
	Slides TUYB1 [6.588 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUYB1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWA071	Improvements of the Laser System for RF-Gun at SuperKEKB Injector	1598
	R. Zhang, T. Natsui, Y. Ogawa, M. Yoshida, X. Zhou KEK, Ibaraki, Japan
	For realizing higher charge and low emittance electron and positron beams in SuperKEKB, we have been making improvements in laser system for RF-gun. The difficulty in controlling thermomechanical distortions has been one of the most important factors for preserving high laser conversion efficiency of infrared-to-ultraviolet and operating at higher repetition rate. We demonstrated that efficient removal of waste heat can be realized by adopting Yb:YAG and copper bonding composite via Au-Sn solder. On the other hand, we proposed the novel design of the cascade laser configuration. Base on this, we can improve the quantum efficiency by utilizing other Yb ions doped crystals as active medium which are pumped by 1035 nm Yb:YAG laser. Excellent thermal management and high charge beams have been achieved by improvements of these two aspects. Additionally, in order to employ high duty ratio pump system and realize laser operation at high repetition rate, we investigated the laser operation in cryogenic environment. A perspective towards the next step experiment is also presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWA071
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY008	Commissioning Status and Plan of SuperKEKB Injector Linac	2013
	M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, T. Takenaka, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou KEK, Ibaraki, Japan D. Satoh TIT, Tokyo, Japan
	Toward SuperKEKB project, the injector linac upgrade is ongoing at KEK in order to deliver the low emittance electron/positron beams with the high intensity and small emittance. In the September of 2013, the injector linac commissioning has started. In this presentation, we will describe the commissioning status and plan of SuperKEKB injector linac.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA044	25 Hz, Sub-mJ Ytterbium Laser Source of RF Gun for SuperKEKB Linac	2862
	X. Zhou, T. Natsui, Y. Ogawa, M. Yoshida, R. Zhang KEK, Ibaraki, Japan
	For injector linac of SuperKEKB project, the 5 nC electron beams with double-bunch is expected to be generated in the photocathode RF gun. For the repetition rate of electrum beam, the optional of 2 Hz, 5 Hz, 25 Hz and 50 Hz are requested. Although, more than 5 nC electron with single-bunch has been generated in the 2 Hz and 5 Hz, when the repetition rate increases to 25 Hz, the condition of the laser amplifier system such as the thermal lens effect is changed seriously. To correspond to 25 Hz repetition rate, the ytterbium-doped laser system was reformed. An AuSu (80:20) heat-dissipating solder is employed to reduce the thermal lens effect. Because of the damage threshold limitation of the thin-disk crystal and optical mirrors, Some improvement were performed to increase the quality of the pulses rather than the amplify power, which cause the SHG conversion efficiency is up to 60% and 30% with 2ω and 4ω respectively. More than 3 nC electron beam is obtained with 25 Hz.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE003	Quasi-Traveling Wave RF Gun and Beam Commissioning for SuperKEKB	1610
	T. Natsui The University of Tokyo, Nuclear Professional School, Ibaraki-ken, Japan Y. Ogawa, M. Yoshida, X. Zhou KEK, Ibaraki, Japan
	We are developing a new RF gun for SuperKEKB. High charge low emittance electron and positron beams are required for SuperKEKB. We will generate 7.0 GeV electron beam at 5 nC 20 mm-mrad by J-linac. In this linac, a photo cathode S-band RF gun will be used as the electron beam source. For this reason, we are developing an advanced RF gun which has two side coupled standing wave field. We call it quasi-traveling wave side couple RF gun. This gun has a strong focusing field at the cathode and the acceleration field distribution also has a focusing effect. This RF gun has been installed in the KEK J-linac. Beam commissioning with the RF gun is in progress.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress of SuperKEKB

1291

T. Miura, T. Abe, T. Adachi, K. Akai, M. Akemoto, A. Akiyama, D.A. Arakawa, Y. Arakida, Y. Arimoto, M. Arinaga, K. Ebihara, K. Egawa, A. Enomoto, J.W. Flanagan, S. Fukuda, H. Fukuma, Y. Funakoshi, K. Furukawa, T. Furuya, K. Hara, T. Higo, H. Hisamatsu, H. Honma, T. Honma, R. Ichimiya, N. Iida, H. Iinuma, H. Ikeda, M. Ikeda, T. Ishibashi, H. Ishii, M. Iwasaki, A. Kabe, T. Kageyama, H. Kaji, K. Kakihara, S. Kamada, T. Kamitani, S. Kanaeda, K. Kanazawa, H. Katagiri, S. Kato, S. Kazama, M. Kikuchi, T. Kobayashi, H. Koiso, Y. Kojima, M. Kurashina, K. Marutsuka, M. Masuzawa, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, F. Miyahara, K. Mori, T. Mori, A. Morita, Y. Morita, H. Nakai, H. Nakajima, T.T. Nakamura, K. Nakanishi, K. Nakao, H. Nakayama, T. Natsui, M. Nishiwaki, J.-I. Odagiri, Y. Ogawa, K. Ohmi, Y. Ohnishi, S. Ohsawa, Y. Ohsawa, N. Ohuchi, K. Oide, T. Oki, M. Ono, H. Sakai, Y. Sakamoto, S. Sasaki, M. Sato, M. Satoh, K. Shibata, T. Shidara, M. Shirai, A. Shirakawa, M. Suetake, Y. Suetsugu, R. Sugahara, H. Sugimoto, T. Suwada, S. Takasaki, T. Takatomi, T. Takenaka, Y. Takeuchi, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, N. Tokuda, K. Tsuchiya, X. Wang, K. Watanabe, H. Yamaoka, Y. Yano, K. Yokoyama, Ma. Yoshida, M. Yoshida, S.I. Yoshimoto, K. Yoshino, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong
KEK, Ibaraki, Japan
D. Satoh
TIT, Tokyo, Japan

This presentation will cover the status of the installation and the injector commissioning status of SuperKEKB. The IR optics and design with very low β^* of less than 1 mm will be discussed.

Slides TUYB1 [6.588 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUYB1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWA071

Improvements of the Laser System for RF-Gun at SuperKEKB Injector

1598

R. Zhang, T. Natsui, Y. Ogawa, M. Yoshida, X. Zhou
KEK, Ibaraki, Japan

For realizing higher charge and low emittance electron and positron beams in SuperKEKB, we have been making improvements in laser system for RF-gun. The difficulty in controlling thermomechanical distortions has been one of the most important factors for preserving high laser conversion efficiency of infrared-to-ultraviolet and operating at higher repetition rate. We demonstrated that efficient removal of waste heat can be realized by adopting Yb:YAG and copper bonding composite via Au-Sn solder. On the other hand, we proposed the novel design of the cascade laser configuration. Base on this, we can improve the quantum efficiency by utilizing other Yb ions doped crystals as active medium which are pumped by 1035 nm Yb:YAG laser. Excellent thermal management and high charge beams have been achieved by improvements of these two aspects. Additionally, in order to employ high duty ratio pump system and realize laser operation at high repetition rate, we investigated the laser operation in cryogenic environment. A perspective towards the next step experiment is also presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWA071

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY008

Commissioning Status and Plan of SuperKEKB Injector Linac

2013

M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, T. Takenaka, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou
KEK, Ibaraki, Japan
D. Satoh
TIT, Tokyo, Japan

Toward SuperKEKB project, the injector linac upgrade is ongoing at KEK in order to deliver the low emittance electron/positron beams with the high intensity and small emittance. In the September of 2013, the injector linac commissioning has started. In this presentation, we will describe the commissioning status and plan of SuperKEKB injector linac.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA044

25 Hz, Sub-mJ Ytterbium Laser Source of RF Gun for SuperKEKB Linac

2862

X. Zhou, T. Natsui, Y. Ogawa, M. Yoshida, R. Zhang
KEK, Ibaraki, Japan

For injector linac of SuperKEKB project, the 5 nC electron beams with double-bunch is expected to be generated in the photocathode RF gun. For the repetition rate of electrum beam, the optional of 2 Hz, 5 Hz, 25 Hz and 50 Hz are requested. Although, more than 5 nC electron with single-bunch has been generated in the 2 Hz and 5 Hz, when the repetition rate increases to 25 Hz, the condition of the laser amplifier system such as the thermal lens effect is changed seriously. To correspond to 25 Hz repetition rate, the ytterbium-doped laser system was reformed. An AuSu (80:20) heat-dissipating solder is employed to reduce the thermal lens effect. Because of the damage threshold limitation of the thin-disk crystal and optical mirrors, Some improvement were performed to increase the quality of the pulses rather than the amplify power, which cause the SHG conversion efficiency is up to 60% and 30% with 2ω and 4ω respectively. More than 3 nC electron beam is obtained with 25 Hz.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE003

Quasi-Traveling Wave RF Gun and Beam Commissioning for SuperKEKB

1610

T. Natsui
The University of Tokyo, Nuclear Professional School, Ibaraki-ken, Japan
Y. Ogawa, M. Yoshida, X. Zhou
KEK, Ibaraki, Japan

We are developing a new RF gun for SuperKEKB. High charge low emittance electron and positron beams are required for SuperKEKB. We will generate 7.0 GeV electron beam at 5 nC 20 mm-mrad by J-linac. In this linac, a photo cathode S-band RF gun will be used as the electron beam source. For this reason, we are developing an advanced RF gun which has two side coupled standing wave field. We call it quasi-traveling wave side couple RF gun. This gun has a strong focusing field at the cathode and the acceleration field distribution also has a focusing effect. This RF gun has been installed in the KEK J-linac. Beam commissioning with the RF gun is in progress.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)