IPAC2014 - List of Authors (Mori, T.)

Paper	Title	Page
MOPRO023	SuperKEKB Beam abort System	116
	T. Mimashi, N. Iida, M. Kikuchi, T. Mori KEK, Ibaraki, Japan K. Abe Hitachi Power Semiconductor Device, Ltd., Hitachishi, Ibaraki, Japan A. Sasagawa KYOCERA Corporation, Higashiomi-city, Shiga, Japan A. Tokuchi Pulsed Power Japan Laboratory Ltd., Kusatsu-shi Shiga, Japan
	The abort system of the SuperKEKB is described. The beam abort system consists of the beam abort kicker magnets, pulsed quadrupole magnets, a lambertson septum magnet and extracted window. The dumped beam is extracted with beam abort kicker through the extraction window. The pulsed quadrupole magnets make the beam spot size large at the window. The damages of the extraction window is tested with KEKB beam. The pulsed kicker power supply is under development.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRO025	Electron Beam Injection System for SuperKEKB Main Ring	122
	T. Mori, N. Iida, M. Kikuchi, T. Mimashi, Y. Sakamoto, S. Takasaki, M. Tawada KEK, Ibaraki, Japan
	The SuperKEKB project is in progress toward the initial physics run in the year 2015. It assumes the nano-beam scheme, in which the emittance of the colliding beams is ε=4.6\mbox{nm}. The emittance of the injected beam is ε=1.46\mbox{nm}. To acheave such a low emittance, it is vitally important to preserve the emittance during the transport of the beam from the linac to the main ring. One of the most difficult sections is the injection system. It has been pointed out that the injected beam has possibility of leading to blowup in the ring, which is caused by a beam-beam interaction with the stored positron beam. To avoid the beam blowup, the synchrotron injection is adopted as a backup option. The orbit of the electron injection beam has been designed and the septum magnet prototype has been constructed. The optics study for electron injection and the current R&D status for the septum magnet will be reported in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO025
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI004	SuperKEKB Positron Source Construction Status	579
	T. Kamitani, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, E. Kadokura, H. Kaji, K. Kakihara, H. Katagiri, M. Kikuchi, H. Koiso, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, M. Sato, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou KEK, Ibaraki, Japan D. Satoh TIT, Tokyo, Japan
	The KEKB positron source is under the upgrade for SuperKEKB. The previous positron production target and capture section have been removed and the new system is constructed at a location forty meters upstream to have sufficient energy margin for beam injection to the newly introduced damping ring. A flux concentrator is introduced in the new capture section to make an adiabatic matching system. Large aperture (30mm in diameter) S-band accelerating structures are introduced in the capture section and in the subsequent accelerator module to enlarge the transverse phase space acceptance. The beam focusing system of quadrupoles is also upgraded for a comparable beam acceptance to that of the capture section. This paper reports on the status of the SuperKEKB positron source construction and the preliminary positron beam commissioning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SuperKEKB Beam abort System

116

T. Mimashi, N. Iida, M. Kikuchi, T. Mori
KEK, Ibaraki, Japan
K. Abe
Hitachi Power Semiconductor Device, Ltd., Hitachishi, Ibaraki, Japan
A. Sasagawa
KYOCERA Corporation, Higashiomi-city, Shiga, Japan
A. Tokuchi
Pulsed Power Japan Laboratory Ltd., Kusatsu-shi Shiga, Japan

The abort system of the SuperKEKB is described. The beam abort system consists of the beam abort kicker magnets, pulsed quadrupole magnets, a lambertson septum magnet and extracted window. The dumped beam is extracted with beam abort kicker through the extraction window. The pulsed quadrupole magnets make the beam spot size large at the window. The damages of the extraction window is tested with KEKB beam. The pulsed kicker power supply is under development.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRO025

Electron Beam Injection System for SuperKEKB Main Ring

122

T. Mori, N. Iida, M. Kikuchi, T. Mimashi, Y. Sakamoto, S. Takasaki, M. Tawada
KEK, Ibaraki, Japan

The SuperKEKB project is in progress toward the initial physics run in the year 2015. It assumes the nano-beam scheme, in which the emittance of the colliding beams is ε=4.6\mbox{nm}. The emittance of the injected beam is ε=1.46\mbox{nm}. To acheave such a low emittance, it is vitally important to preserve the emittance during the transport of the beam from the linac to the main ring. One of the most difficult sections is the injection system. It has been pointed out that the injected beam has possibility of leading to blowup in the ring, which is caused by a beam-beam interaction with the stored positron beam. To avoid the beam blowup, the synchrotron injection is adopted as a backup option. The orbit of the electron injection beam has been designed and the septum magnet prototype has been constructed. The optics study for electron injection and the current R&D status for the septum magnet will be reported in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO025

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI004

SuperKEKB Positron Source Construction Status

579

T. Kamitani, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, E. Kadokura, H. Kaji, K. Kakihara, H. Katagiri, M. Kikuchi, H. Koiso, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, M. Sato, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou
KEK, Ibaraki, Japan
D. Satoh
TIT, Tokyo, Japan

The KEKB positron source is under the upgrade for SuperKEKB. The previous positron production target and capture section have been removed and the new system is constructed at a location forty meters upstream to have sufficient energy margin for beam injection to the newly introduced damping ring. A flux concentrator is introduced in the new capture section to make an adiabatic matching system. Large aperture (30mm in diameter) S-band accelerating structures are introduced in the capture section and in the subsequent accelerator module to enlarge the transverse phase space acceptance. The beam focusing system of quadrupoles is also upgraded for a comparable beam acceptance to that of the capture section. This paper reports on the status of the SuperKEKB positron source construction and the preliminary positron beam commissioning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)