IPAC2013 - List of Authors (Onishchenko, I.N.)

Paper	Title	Page
TUPEA056	Concept of Dielectric Wakefield Accelerator Driven by a Long Sequence of Electron Bunches	1259
	I.N. Onishchenko, V. Kiselev, A. Linnik, G.V. Sotnikov NSC/KIPT, Kharkov, Ukraine
	Funding: This study is supported by Global Initiatives for Proliferation Prevention (GIPP) program, project ANL-T2-247-UA (STCU Agreement P522) The scheme of a two-beam accelerator type is considered that is based on wakefield excitation in rectangular dielectric resonator by a sequence of electron bunches with the aim to enhance wakefield intensity due to multi-bunch coherent excitation, multi-mode summation, and wakefield accumulation in resonator. The sequence of bunches can be divided into exciting and accelerated parts in any proportion by means at the proper detuning of bunch repetition frequency relative to the frequency of principle eigen mode of the resonator. A train of 6000 electron bunches, each of energy 4.5МeV, charge 0.16nC, duration 60psec, diameter 1.0cm, and angular spread 0.05 mrad is produced with the linear resonant accelerator. Bunch repetition frequency is 2805 MHz and can be varied within 2MHz by changing master oscillator frequency. Bunches are injected into copper rectangular waveguide of cross-section 8.5x18.0cm² and length 75cm along wide sides of which Teflon plates are placed. The plate thickness is chosen 1.67cm so that the frequency of excited eigen mode coincides with bunch repetition frequency.

TUPEA057	Optimization of Rectangular Dielectric Structures for the Planned Wakefield Acceleration Experiments in KIPT	1262
	G.V. Sotnikov, K.V. Galaydych, V. Kiselev, P.I. Markov, I.N. Onishchenko NSC/KIPT, Kharkov, Ukraine
	Funding: This study is supported by Global Initiatives for Proliferation Prevention (GIPP) program, project ANL-T2-247-UA (STCU Agreement P522). We, at the Kharkov Institute of Physics and Technology, planned experimental test of the basic principles of the multi-bunch multi-mode wakefield accelerator. For this purpose we carried out a series of calculations of wakefield excitation and dynamics of the drive and witness bunches in rectangular structures with a dielectric substrate. For optimization two rectangular vacuum waveguides of R32 (72.14mm x 34.04mm) and R26 (86.36mm x 43.18mm) which were filled with the dielectric covering two any opposite metal walls of a waveguide were chosen. As possible dielectric Alumina, Cordierite, or Teflon were tested. It was supposed that the structure will be energized by sequence of electron bunches (bunch repetition frequency is 2.805 GHz), having energy of 4.5 MeV. As the candidate for operating mode LSM-wave or LSE-wave, with frequency to equal the bunch repetition frequency or its doubled frequency were tested. The gradient of an accelerating field, small transverse deflection (or divergence) of drive and witness bunches were the main criteria of optimization. As a result of optimization we propose some dielectric structures for future wakefield experiments in KIPT.

Paper

Title

Page

Concept of Dielectric Wakefield Accelerator Driven by a Long Sequence of Electron Bunches

1259

I.N. Onishchenko, V. Kiselev, A. Linnik, G.V. Sotnikov
NSC/KIPT, Kharkov, Ukraine

Funding: This study is supported by Global Initiatives for Proliferation Prevention (GIPP) program, project ANL-T2-247-UA (STCU Agreement P522)
The scheme of a two-beam accelerator type is considered that is based on wakefield excitation in rectangular dielectric resonator by a sequence of electron bunches with the aim to enhance wakefield intensity due to multi-bunch coherent excitation, multi-mode summation, and wakefield accumulation in resonator. The sequence of bunches can be divided into exciting and accelerated parts in any proportion by means at the proper detuning of bunch repetition frequency relative to the frequency of principle eigen mode of the resonator. A train of 6000 electron bunches, each of energy 4.5МeV, charge 0.16nC, duration 60psec, diameter 1.0cm, and angular spread 0.05 mrad is produced with the linear resonant accelerator. Bunch repetition frequency is 2805 MHz and can be varied within 2MHz by changing master oscillator frequency. Bunches are injected into copper rectangular waveguide of cross-section 8.5x18.0cm² and length 75cm along wide sides of which Teflon plates are placed. The plate thickness is chosen 1.67cm so that the frequency of excited eigen mode coincides with bunch repetition frequency.

TUPEA057

Optimization of Rectangular Dielectric Structures for the Planned Wakefield Acceleration Experiments in KIPT

1262

G.V. Sotnikov, K.V. Galaydych, V. Kiselev, P.I. Markov, I.N. Onishchenko
NSC/KIPT, Kharkov, Ukraine

Funding: This study is supported by Global Initiatives for Proliferation Prevention (GIPP) program, project ANL-T2-247-UA (STCU Agreement P522).
We, at the Kharkov Institute of Physics and Technology, planned experimental test of the basic principles of the multi-bunch multi-mode wakefield accelerator. For this purpose we carried out a series of calculations of wakefield excitation and dynamics of the drive and witness bunches in rectangular structures with a dielectric substrate. For optimization two rectangular vacuum waveguides of R32 (72.14mm x 34.04mm) and R26 (86.36mm x 43.18mm) which were filled with the dielectric covering two any opposite metal walls of a waveguide were chosen. As possible dielectric Alumina, Cordierite, or Teflon were tested. It was supposed that the structure will be energized by sequence of electron bunches (bunch repetition frequency is 2.805 GHz), having energy of 4.5 MeV. As the candidate for operating mode LSM-wave or LSE-wave, with frequency to equal the bunch repetition frequency or its doubled frequency were tested. The gradient of an accelerating field, small transverse deflection (or divergence) of drive and witness bunches were the main criteria of optimization. As a result of optimization we propose some dielectric structures for future wakefield experiments in KIPT.