IPAC2013 - List of Authors (Marsili, A.)

Paper

Title

Page

Simulations and Measurements of Cleaning with 100 MJ Beams in the LHC

52

R. Bruce, R.W. Aßmann, V. Boccone, C. Bracco, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, G. Valentino, V. Vlachoudis, Th. Weiler, D. Wollmann
CERN, Geneva, Switzerland
L. Lari
IFIC, Valencia, Spain
E. Quaranta
Politecnico/Milano, Milano, Italy
G. Valentino
University of Malta, Information and Communication Technology, Msida, Malta

The CERN Large Hadron Collider is routinely storing proton beam intensities of more than 100 MJ, which puts extraordinary demands on the control of beam losses to avoid quenches of the superconducting magnets. Therefore, a detailed understanding of the LHC beam cleaning is required. We present tracking and shower simulations of the LHC's multi-stage collimation system and compare with measured beam losses, which allow us to conclude on the predictive power of the simulations.

Slides MOODB202 [6.343 MB]

MOPWO010

Machine Protection Studies for a Crab Cavity in the LHC

906

B. Yee-Rendon, R. Lopez-Fernandez
CINVESTAV, Mexico City, Mexico
T. Baer, J. Barranco, R. Calaga, A. Marsili, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland

Funding: US-LARP and CONACYT
Crab cavities (CCs) apply a transverse kick that rotate the bunches so as to have a head-on collision at the interaction point (IP). Such cavities were successfully used to improve the luminosity of KEKB. They are also a key ingredient of the HL-LHC project to increase the luminosity of the LHC. As CCs can rapidly change the particle trajectories, machine protection studies are required to assess the beam losses due to fast CC failures. In this paper, we discuss the effect of rapid voltage or phase changes in a CC for the HL-LHC layout using measured beam distributions from the present LHC.

MOPWO041

Simulations and Measurements of Physics Debris Losses at the 4 TeV LHC

984

A. Marsili, R. Bruce, F. Cerutti, S. Redaelli
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is included in the HL-LHC project and is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
Simulations of energy deposition from the physics debris are normally done with shower simulation tools like FLUKA. Tracking tools like SixTrack allow faster simulations that open the possibility to study parametrically and optimize different layouts. In this paper, the results of FLUKA and SixTrack simulations are compared to beam measurements done for different collimator settings at 4 TeV, with p-p luminosities up to 7·10³³ cm^-2s⁻¹.

MOPWO042

Simulations of Collimation Cleaning Performance with HL-LHC Optics

987

A. Marsili, R. Bruce, R. De Maria, S.D. Fartoukh, S. Redaelli
CERN, Geneva, Switzerland

Funding: The HiLumi LHC Design Study is included in the HL-LHC project and is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404.
The upgrade of the LHC from the current set-up to high luminosity performances will provide new challenges for the protection of the machine. The different optics considered might create new needs for collimation, and require new collimation locations. In order to evaluate the cleaning performances of the collimation system, different halo cleaning simulations were performed with the particle tracking code SixTrack. This paper presents the cleaning performance simulation results for the high luminosity Achromatic Telescopic Squeeze optics considered as baseline for the HL-LHC. The new limitations observed and possible solutions are discussed.

MOPWO048

Cleaning Performance of the LHC Collimation System up to 4 TeV

1002

B. Salvachua, R.W. Aßmann, R. Bruce, M. Cauchi, D. Deboy, L. Lari, A. Marsili, D. Mirarchi, E. Quaranta, S. Redaelli, A. Rossi, G. Valentino
CERN, Geneva, Switzerland
M. Cauchi
UoM, Msida, Malta
L. Lari
IFIC, Valencia, Spain
D. Mirarchi
The Imperial College of Science, Technology and Medicine, London, United Kingdom
G. Valentino
University of Malta, Information and Communication Technology, Msida, Malta

Funding: Research supported by EU FP7 HiLumi LHC (Grant agreement 284404)
In this paper we review the performance of the LHC collimation system during 2012 and compare it with previous years. During 2012, the so-called tight settings were deployed for a better cleaning and improved beta-star reach. As a result, a record cleaning efficiency below a few 0.0001 was achieved in the cold regions where the highest beam losses occur. The cleaning in other cold locations is typically a factor of 10 better. No quenches were observed during regular operation with up to 140 MJ stored beam energy. The system stability during the year, monitored regularly to ensure the system functionality for all machine configurations, and the performance of the alignment tools are also reviewed.

Paper	Title	Page
MOODB202	Simulations and Measurements of Cleaning with 100 MJ Beams in the LHC	52
	R. Bruce, R.W. Aßmann, V. Boccone, C. Bracco, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, G. Valentino, V. Vlachoudis, Th. Weiler, D. Wollmann CERN, Geneva, Switzerland L. Lari IFIC, Valencia, Spain E. Quaranta Politecnico/Milano, Milano, Italy G. Valentino University of Malta, Information and Communication Technology, Msida, Malta
	The CERN Large Hadron Collider is routinely storing proton beam intensities of more than 100 MJ, which puts extraordinary demands on the control of beam losses to avoid quenches of the superconducting magnets. Therefore, a detailed understanding of the LHC beam cleaning is required. We present tracking and shower simulations of the LHC's multi-stage collimation system and compare with measured beam losses, which allow us to conclude on the predictive power of the simulations.
	Slides MOODB202 [6.343 MB]

MOPWO010	Machine Protection Studies for a Crab Cavity in the LHC	906
	B. Yee-Rendon, R. Lopez-Fernandez CINVESTAV, Mexico City, Mexico T. Baer, J. Barranco, R. Calaga, A. Marsili, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland
	Funding: US-LARP and CONACYT Crab cavities (CCs) apply a transverse kick that rotate the bunches so as to have a head-on collision at the interaction point (IP). Such cavities were successfully used to improve the luminosity of KEKB. They are also a key ingredient of the HL-LHC project to increase the luminosity of the LHC. As CCs can rapidly change the particle trajectories, machine protection studies are required to assess the beam losses due to fast CC failures. In this paper, we discuss the effect of rapid voltage or phase changes in a CC for the HL-LHC layout using measured beam distributions from the present LHC.

MOPWO041	Simulations and Measurements of Physics Debris Losses at the 4 TeV LHC	984
	A. Marsili, R. Bruce, F. Cerutti, S. Redaelli CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is included in the HL-LHC project and is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. Simulations of energy deposition from the physics debris are normally done with shower simulation tools like FLUKA. Tracking tools like SixTrack allow faster simulations that open the possibility to study parametrically and optimize different layouts. In this paper, the results of FLUKA and SixTrack simulations are compared to beam measurements done for different collimator settings at 4 TeV, with p-p luminosities up to 7·10³³ cm^-2s⁻¹.

MOPWO042	Simulations of Collimation Cleaning Performance with HL-LHC Optics	987
	A. Marsili, R. Bruce, R. De Maria, S.D. Fartoukh, S. Redaelli CERN, Geneva, Switzerland
	Funding: The HiLumi LHC Design Study is included in the HL-LHC project and is partly funded by the European Commission within the Framework Programme 7 Capacities Specific Programme, Grant Agreement 284404. The upgrade of the LHC from the current set-up to high luminosity performances will provide new challenges for the protection of the machine. The different optics considered might create new needs for collimation, and require new collimation locations. In order to evaluate the cleaning performances of the collimation system, different halo cleaning simulations were performed with the particle tracking code SixTrack. This paper presents the cleaning performance simulation results for the high luminosity Achromatic Telescopic Squeeze optics considered as baseline for the HL-LHC. The new limitations observed and possible solutions are discussed.

MOPWO048	Cleaning Performance of the LHC Collimation System up to 4 TeV	1002
	B. Salvachua, R.W. Aßmann, R. Bruce, M. Cauchi, D. Deboy, L. Lari, A. Marsili, D. Mirarchi, E. Quaranta, S. Redaelli, A. Rossi, G. Valentino CERN, Geneva, Switzerland M. Cauchi UoM, Msida, Malta L. Lari IFIC, Valencia, Spain D. Mirarchi The Imperial College of Science, Technology and Medicine, London, United Kingdom G. Valentino University of Malta, Information and Communication Technology, Msida, Malta
	Funding: Research supported by EU FP7 HiLumi LHC (Grant agreement 284404) In this paper we review the performance of the LHC collimation system during 2012 and compare it with previous years. During 2012, the so-called tight settings were deployed for a better cleaning and improved beta-star reach. As a result, a record cleaning efficiency below a few 0.0001 was achieved in the cold regions where the highest beam losses occur. The cleaning in other cold locations is typically a factor of 10 better. No quenches were observed during regular operation with up to 140 MJ stored beam energy. The system stability during the year, monitored regularly to ensure the system functionality for all machine configurations, and the performance of the alignment tools are also reviewed.