IPAC2013 - List of Authors (Arduini, G.)

Paper

Title

Page

Electron Cloud and Scrubbing Studies for the LHC

1331

G. Iadarola
Naples University Federico II, Science and Technology Pole, Napoli, Italy
G. Arduini, V. Baglin, H. Bartosik, C.O. Domínguez, J.F. Esteban Müller, G. Iadarola, G. Rumolo, E.N. Shaposhnikova, L.J. Tavian, F. Zimmermann
CERN, Geneva, Switzerland
C.O. Domínguez
EPFL, Lausanne, Switzerland
G.H.I. Maury Cuna
CINVESTAV, Mexico City, Mexico

Electron cloud build-up resulting from beam-induced multipacting is one of the major limitations for the operation of the LHC with beams with close bunch spacing. Electron clouds induce unwanted pressure rise, heat loads on the beam screens of the superconducting magnets and beam instabilities. Operation with bunch spacing of 50 ns in 2011 and 2012 has required decreasing the Secondary Electron Yield of the beam screens below the multipacting threshold for beams with this bunch spacing. This was achieved by continuous electron bombardment induced by operating the machine with high intensity beams with 50 and 25 ns spacing during dedicated periods at injection energy (450 GeV) and at top energy (3.5 and 4 TeV). The evolution of the Secondary Electron Yield during these periods, at different sections of the machine, can be estimated by pressure, heat load and by bunch-by-bunch RF stable phase measurements. The experimental information on the scrubbing process will be discussed and a possible “scrubbing strategy” to allow the operation with 50ns and 25ns beams after the Long Shutdown in 2013-2014 will be presented.

TUPFI026

Investigations of the LHC Emittance Blow-Up during the 2012 Proton Run

1394

M. Kuhn
Uni HH, Hamburg, Germany
G. Arduini, P. Baudrenghien, J. Emery, A. Guerrero, W. Höfle, V. Kain, M. Lamont, T. Mastoridis, F. Roncarolo, M. Sapinski, M. Schaumann, R.J. Steinhagen, G. Trad, D. Valuch
CERN, Geneva, Switzerland

About 30 % of the potential luminosity performance is lost through the different phases of the LHC cycle, mainly due to transverse emittance blow-up. Measuring the emittance growth is a difficult task with high intensity beams and changing energies. Improvements of the LHC transverse profile instrumentation helped to study various effects. A breakdown of the growth through the different phases of the LHC cycle is given as well as a comparison with the data from the LHC experiments for transverse beam size. In 2012 a number of possible sources and remedies have been studied. Among these are intra beam scattering, 50 Hz noise and the effect of the transverse damper gain. The results of the investigations are summarized in this paper. Requirements for transverse profile instrumentation for post LHC long shutdown operation to finally tackle the emittance growth are given as well.

TUPFI031

Effect of Collision Pattern in the LHC on the Beam Stability: Requirements from Experiments and Operational Considerations

1409

W. Herr, G. Arduini, R. Giachino, E. Métral, G. Papotti, T. Pieloni
CERN, Geneva, Switzerland
X. Buffat, N. Mounet
EPFL, Lausanne, Switzerland
S.M. White
BNL, Upton, Long Island, New York, USA

Coherent instabilities of bunches in the LHC bunch train can be observed when the tune spread from beam-beam interactions becomes insufficient to ensure Landau damping. In particular these effects are seen on bunches with a reduced number of beam-beam interactions due to their collision pattern. Furthermore, such a reduction of the necessary stability can occur during the processes when the beams are prepared for collisions or during the optimization procedure. We discuss the observations and possible countermeasures, in particular alternatives to the existing beam manipulation processes where such a situation can occur.

TUPFI032

Observation of Instabilities in the LHC due to Missing Head-on Beam-beam Interactions

1412

W. Herr, G. Arduini, R. Giachino, E. Métral, G. Papotti, T. Pieloni
CERN, Geneva, Switzerland
X. Buffat, N. Mounet
EPFL, Lausanne, Switzerland

We report the observation of coherent instabilities on individual bunches out of the LHC bunch train. These instabilities occured spontaneously after several hours of stable beam while in other cases they were related to the application of a small transverse beam separation during a luminosity optimization. Only few bunches were affected, depending on there collision scheme and following various tests we interprete these instabilities as a sudden loss of Landau damping when the tune spread from the beam-beam interaction became insufficient.

TUPFI034

Observations of Two-beam Instabilities during the 2012 LHC Physics Run

1418

T. Pieloni
EPFL, Lausanne, Switzerland
G. Arduini, X. Buffat, R. Giachino, W. Herr, M. Lamont, N. Mounet, E. Métral, G. Papotti, B. Salvant, J. Wenninger
CERN, Geneva, Switzerland
S.M. White
BNL, Upton, Long Island, New York, USA

During the 2012 run coherent beam instabilities have been observed in the LHC at 4 TeV, during the betatron squeeze and in collision for special filling patterns. Several studies to characterize these instabilities have been carried out during operation and in special dedicated experiments. In this paper we summarize the observations collected for different machine parameters and the present understanding of the origin of these instabilities.

TUPME032

Update on Beam Induced RF Heating in the LHC

1646

B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, W. Bartmann, P. Baudrenghien, O.E. Berrig, A. Bertarelli, C. Bracco, E. Bravin, G. Bregliozzi, R. Bruce, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, M. Deile, J.F. Esteban Müller, P. Fassnacht, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, S. Jakobsen, O.R. Jones, O. Kononenko, G. Lanza, L. Lari, T. Mastoridis, V. Mertens, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, R. Schmidt, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, J. Wenninger, D. Wollmann, M. Zerlauth
CERN, Geneva, Switzerland
H.A. Day
UMAN, Manchester, United Kingdom
L. Lari
IFIC, Valencia, Spain

Since June 2011, the rapid increase of the luminosity performance of the LHC has come at the expense of increased temperature and pressure readings on specific near-beam LHC equipment. In some cases, this beam induced heating has caused delays whilie equipment cools down, beam dumps and even degradation of these devices. This contribution gathers the observations of beam induced heating attributable to beam coupling impedance, their current level of understanding and possible actions that are planned to be implemented during the long shutdown in 2013-2014.

TUPME046

Performance of SPS Low Transition Energy Optics for LHC Ion Beams

1667

F. Antoniou, G. Arduini, H. Bartosik, T. Bohl, S. Cettour Cave, K. Cornelis, D. Manglunki, Y. Papaphilippou
CERN, Geneva, Switzerland

An optics with low transition energy has been developed in the SPS for removing intensity limitations of the LHC proton beam and has become operational towards the second part of the 2012 LHC proton run. This optics was also used for filling the LHC with lead ions during the p/Pb run of the beginning of 2013. The impact of this optics in the performance of the LHC ion beam is studied here, especially with respect to collective effects, at the SPS injection energy. In particular, the potential gain of the increased beam sizes provided by this optics, with respect to losses and emittance blow up due to space-charge and Intrabeam Scattering (IBS) is evaluated. The measured lifetime is compared with the one provided by the Touschek effect and its interplay with RF noise is studied. The models are supported by measurements in the SPS and in the LHC flat bottom.

WEPEA070

Space Charge Effects and Limitations in the Cern Proton Synchrotron

2669

R. Wasef, G. Arduini, H. Damerau, S.S. Gilardoni, S. Hancock, C. Hernalsteens, A. Huschauer, F. Schmidt
CERN, Geneva, Switzerland
G. Franchetti
GSI, Darmstadt, Germany

Space charge produces a large incoherent tune-spread which, in presence of betatronic resonances, could lead to beam losses and emittance growth. In the CERN Proton Synchrotron, at the current injection kinetic energy (1.4 GeV) and even at the future kinetic energy (2 GeV), space charge is one of the main limitations for high brightness beams and especially for the future High-Luminosity LHC beams. Several detailed studies and measurements have been carried out to improve the understanding of space charge limitations to determine the maximum acceptable tune spread and identify the most important resonances causing losses and emittance growth.

THOBB102

Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines

3106

N. Biancacci, G. Arduini, T. Argyropoulos, H. Bartosik, R. Calaga, K. Cornelis, S.S. Gilardoni, N. Mounet, E. Métral, Y. Papaphilippou, S. Persichelli, G. Rumolo, B. Salvant, G. Sterbini, R. Tomás, R. Wasef
CERN, Geneva, Switzerland
M. Migliorati, L. Palumbo
URLS, Rome, Italy

The beam coupling impedance could lead to limitations in beam brightness and quality, and therefore it needs accurate quantification and continuous monitoring in order to detect and mitigate high impedance sources. In the CERN machines, for example, kickers and collimators are expected to be the main contributors to the total imaginary part of the transverse impedance. In order to detect the other sources, a beam based measurement was developed: from the variation of betatron phase beating with intensity, it is possible to detect the locations of main impedance sources. In this work we present the application of the method with beam measurements in the CERN PS, SPS and LHC.

Slides THOBB102 [7.224 MB]

THPWO080

Operational Performance of the LHC Proton Beams with the SPS Low Transition Energy Optics

3945

Y. Papaphilippou, G. Arduini, T. Argyropoulos, W. Bartmann, H. Bartosik, T. Bohl, C. Bracco, S. Cettour-Cave, K. Cornelis, L.N. Drøsdal, J.F. Esteban Müller, B. Goddard, A. Guerrero, W. Höfle, V. Kain, G. Rumolo, B. Salvant, E.N. Shaposhnikova, H. Timko, D. Valuch, G. Vanbavinckhove, J. Wenninger
CERN, Geneva, Switzerland
E. Gianfelice-Wendt
Fermilab, Batavia, USA

An optics in the SPS with lower integer tunes (20 versus 26) was proposed and introduced in machine studies since 2010, as a measure for increasing transverse and longitudinal instability thresholds, especially at low energy, for the LHC proton beams. After two years of machine studies and careful optimisation, the new “Q20” optics became operational in September 2012 and steadily delivered beam to the LHC until the end of the run. This paper reviews the operational performance of the Q20 optics with respect to transverse and longitudinal beam characteristics in the SPS, enabling high brightness beams injected into the LHC. Aspects of longitudinal beam stability, transmission, high-energy orbit control and beam transfer are discussed.

Paper	Title	Page
TUPFI002	Electron Cloud and Scrubbing Studies for the LHC	1331
	G. Iadarola Naples University Federico II, Science and Technology Pole, Napoli, Italy G. Arduini, V. Baglin, H. Bartosik, C.O. Domínguez, J.F. Esteban Müller, G. Iadarola, G. Rumolo, E.N. Shaposhnikova, L.J. Tavian, F. Zimmermann CERN, Geneva, Switzerland C.O. Domínguez EPFL, Lausanne, Switzerland G.H.I. Maury Cuna CINVESTAV, Mexico City, Mexico
	Electron cloud build-up resulting from beam-induced multipacting is one of the major limitations for the operation of the LHC with beams with close bunch spacing. Electron clouds induce unwanted pressure rise, heat loads on the beam screens of the superconducting magnets and beam instabilities. Operation with bunch spacing of 50 ns in 2011 and 2012 has required decreasing the Secondary Electron Yield of the beam screens below the multipacting threshold for beams with this bunch spacing. This was achieved by continuous electron bombardment induced by operating the machine with high intensity beams with 50 and 25 ns spacing during dedicated periods at injection energy (450 GeV) and at top energy (3.5 and 4 TeV). The evolution of the Secondary Electron Yield during these periods, at different sections of the machine, can be estimated by pressure, heat load and by bunch-by-bunch RF stable phase measurements. The experimental information on the scrubbing process will be discussed and a possible “scrubbing strategy” to allow the operation with 50ns and 25ns beams after the Long Shutdown in 2013-2014 will be presented.

TUPFI026	Investigations of the LHC Emittance Blow-Up during the 2012 Proton Run	1394
	M. Kuhn Uni HH, Hamburg, Germany G. Arduini, P. Baudrenghien, J. Emery, A. Guerrero, W. Höfle, V. Kain, M. Lamont, T. Mastoridis, F. Roncarolo, M. Sapinski, M. Schaumann, R.J. Steinhagen, G. Trad, D. Valuch CERN, Geneva, Switzerland
	About 30 % of the potential luminosity performance is lost through the different phases of the LHC cycle, mainly due to transverse emittance blow-up. Measuring the emittance growth is a difficult task with high intensity beams and changing energies. Improvements of the LHC transverse profile instrumentation helped to study various effects. A breakdown of the growth through the different phases of the LHC cycle is given as well as a comparison with the data from the LHC experiments for transverse beam size. In 2012 a number of possible sources and remedies have been studied. Among these are intra beam scattering, 50 Hz noise and the effect of the transverse damper gain. The results of the investigations are summarized in this paper. Requirements for transverse profile instrumentation for post LHC long shutdown operation to finally tackle the emittance growth are given as well.

TUPFI031	Effect of Collision Pattern in the LHC on the Beam Stability: Requirements from Experiments and Operational Considerations	1409
	W. Herr, G. Arduini, R. Giachino, E. Métral, G. Papotti, T. Pieloni CERN, Geneva, Switzerland X. Buffat, N. Mounet EPFL, Lausanne, Switzerland S.M. White BNL, Upton, Long Island, New York, USA
	Coherent instabilities of bunches in the LHC bunch train can be observed when the tune spread from beam-beam interactions becomes insufficient to ensure Landau damping. In particular these effects are seen on bunches with a reduced number of beam-beam interactions due to their collision pattern. Furthermore, such a reduction of the necessary stability can occur during the processes when the beams are prepared for collisions or during the optimization procedure. We discuss the observations and possible countermeasures, in particular alternatives to the existing beam manipulation processes where such a situation can occur.

TUPFI032	Observation of Instabilities in the LHC due to Missing Head-on Beam-beam Interactions	1412
	W. Herr, G. Arduini, R. Giachino, E. Métral, G. Papotti, T. Pieloni CERN, Geneva, Switzerland X. Buffat, N. Mounet EPFL, Lausanne, Switzerland
	We report the observation of coherent instabilities on individual bunches out of the LHC bunch train. These instabilities occured spontaneously after several hours of stable beam while in other cases they were related to the application of a small transverse beam separation during a luminosity optimization. Only few bunches were affected, depending on there collision scheme and following various tests we interprete these instabilities as a sudden loss of Landau damping when the tune spread from the beam-beam interaction became insufficient.

TUPFI034	Observations of Two-beam Instabilities during the 2012 LHC Physics Run	1418
	T. Pieloni EPFL, Lausanne, Switzerland G. Arduini, X. Buffat, R. Giachino, W. Herr, M. Lamont, N. Mounet, E. Métral, G. Papotti, B. Salvant, J. Wenninger CERN, Geneva, Switzerland S.M. White BNL, Upton, Long Island, New York, USA
	During the 2012 run coherent beam instabilities have been observed in the LHC at 4 TeV, during the betatron squeeze and in collision for special filling patterns. Several studies to characterize these instabilities have been carried out during operation and in special dedicated experiments. In this paper we summarize the observations collected for different machine parameters and the present understanding of the origin of these instabilities.

TUPME032	Update on Beam Induced RF Heating in the LHC	1646
	B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, W. Bartmann, P. Baudrenghien, O.E. Berrig, A. Bertarelli, C. Bracco, E. Bravin, G. Bregliozzi, R. Bruce, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, M. Deile, J.F. Esteban Müller, P. Fassnacht, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, S. Jakobsen, O.R. Jones, O. Kononenko, G. Lanza, L. Lari, T. Mastoridis, V. Mertens, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, R. Schmidt, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, J. Wenninger, D. Wollmann, M. Zerlauth CERN, Geneva, Switzerland H.A. Day UMAN, Manchester, United Kingdom L. Lari IFIC, Valencia, Spain
	Since June 2011, the rapid increase of the luminosity performance of the LHC has come at the expense of increased temperature and pressure readings on specific near-beam LHC equipment. In some cases, this beam induced heating has caused delays whilie equipment cools down, beam dumps and even degradation of these devices. This contribution gathers the observations of beam induced heating attributable to beam coupling impedance, their current level of understanding and possible actions that are planned to be implemented during the long shutdown in 2013-2014.

TUPME046	Performance of SPS Low Transition Energy Optics for LHC Ion Beams	1667
	F. Antoniou, G. Arduini, H. Bartosik, T. Bohl, S. Cettour Cave, K. Cornelis, D. Manglunki, Y. Papaphilippou CERN, Geneva, Switzerland
	An optics with low transition energy has been developed in the SPS for removing intensity limitations of the LHC proton beam and has become operational towards the second part of the 2012 LHC proton run. This optics was also used for filling the LHC with lead ions during the p/Pb run of the beginning of 2013. The impact of this optics in the performance of the LHC ion beam is studied here, especially with respect to collective effects, at the SPS injection energy. In particular, the potential gain of the increased beam sizes provided by this optics, with respect to losses and emittance blow up due to space-charge and Intrabeam Scattering (IBS) is evaluated. The measured lifetime is compared with the one provided by the Touschek effect and its interplay with RF noise is studied. The models are supported by measurements in the SPS and in the LHC flat bottom.

WEPEA070	Space Charge Effects and Limitations in the Cern Proton Synchrotron	2669
	R. Wasef, G. Arduini, H. Damerau, S.S. Gilardoni, S. Hancock, C. Hernalsteens, A. Huschauer, F. Schmidt CERN, Geneva, Switzerland G. Franchetti GSI, Darmstadt, Germany
	Space charge produces a large incoherent tune-spread which, in presence of betatronic resonances, could lead to beam losses and emittance growth. In the CERN Proton Synchrotron, at the current injection kinetic energy (1.4 GeV) and even at the future kinetic energy (2 GeV), space charge is one of the main limitations for high brightness beams and especially for the future High-Luminosity LHC beams. Several detailed studies and measurements have been carried out to improve the understanding of space charge limitations to determine the maximum acceptable tune spread and identify the most important resonances causing losses and emittance growth.

THOBB102	Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines	3106
	N. Biancacci, G. Arduini, T. Argyropoulos, H. Bartosik, R. Calaga, K. Cornelis, S.S. Gilardoni, N. Mounet, E. Métral, Y. Papaphilippou, S. Persichelli, G. Rumolo, B. Salvant, G. Sterbini, R. Tomás, R. Wasef CERN, Geneva, Switzerland M. Migliorati, L. Palumbo URLS, Rome, Italy
	The beam coupling impedance could lead to limitations in beam brightness and quality, and therefore it needs accurate quantification and continuous monitoring in order to detect and mitigate high impedance sources. In the CERN machines, for example, kickers and collimators are expected to be the main contributors to the total imaginary part of the transverse impedance. In order to detect the other sources, a beam based measurement was developed: from the variation of betatron phase beating with intensity, it is possible to detect the locations of main impedance sources. In this work we present the application of the method with beam measurements in the CERN PS, SPS and LHC.
	Slides THOBB102 [7.224 MB]

THPWO080	Operational Performance of the LHC Proton Beams with the SPS Low Transition Energy Optics	3945
	Y. Papaphilippou, G. Arduini, T. Argyropoulos, W. Bartmann, H. Bartosik, T. Bohl, C. Bracco, S. Cettour-Cave, K. Cornelis, L.N. Drøsdal, J.F. Esteban Müller, B. Goddard, A. Guerrero, W. Höfle, V. Kain, G. Rumolo, B. Salvant, E.N. Shaposhnikova, H. Timko, D. Valuch, G. Vanbavinckhove, J. Wenninger CERN, Geneva, Switzerland E. Gianfelice-Wendt Fermilab, Batavia, USA
	An optics in the SPS with lower integer tunes (20 versus 26) was proposed and introduced in machine studies since 2010, as a measure for increasing transverse and longitudinal instability thresholds, especially at low energy, for the LHC proton beams. After two years of machine studies and careful optimisation, the new “Q20” optics became operational in September 2012 and steadily delivered beam to the LHC until the end of the run. This paper reviews the operational performance of the Q20 optics with respect to transverse and longitudinal beam characteristics in the SPS, enabling high brightness beams injected into the LHC. Aspects of longitudinal beam stability, transmission, high-energy orbit control and beam transfer are discussed.