IPAC2012 - List of Authors (Zang, L.)

Paper	Title	Page
TUPPD032	Design Optimization of Flux Concentrator for SuperKEKB	1473
	L. Zang, S. Fukuda, T. Kamitani, Y. Ogawa KEK, Ibaraki, Japan
	For high luminosity electron-positron colliders, intense positron beam production is one of the key issues as well as electron. Flux Concentrator (FC) is a pulsed solenoid that can generate high magnetic field of several Tesla and is often used for focusing positrons emerged from a production target. It works as an optical matching device in a positron capture section. With this device, high capture efficiency is achieved. In this paper, we will discuss a design optimization of a FC for the SuperKEKB positron source. Geometrical parameters of the FC are optimized to achieve high peak field using the CST EM Studio. Magnetic field distribution evaluated with the EM Studio is implemented into a particle tracking code to see a performance of the positron capture section. The tracking simulation includes a positron production at the target, focusing by the FC and subsequent solenoids and acceleration by RF structures till the end of the capture section. We report the results of a FC design optimized for higher positron yield with the tracking simulation.

TUPPD035	SuperKEKB Injector Upgrade for High Charge and Low Emittance Electron Beam	1482
	M. Yoshida, N. Iida, Y. Ogawa, M. Sato, L. Zang KEK, Ibaraki, Japan
	The design strategy of SuperKEKB is based on the nano-beam scheme. The dynamic aperture decreases due to the very small beta function at the interaction point. Thus the injector upgrade is required to obtain the low emittance and high charge beam corresponding to the short beam life and small injection acceptance. The required beam parameters are 5 nC, 20 mm mrad and 4 nC, 6 mm mrad for the electron and positron respectively. For the electron beam, new photocathode RF-Gun with the focusing electric field was installed. Further the emittance growth in the linac is an important issue for the low emittance injection. We will report the machine study of the RF-Gun and the emittance growth through the linac.

TUPPR005	Linac Upgrade in Intensity and Emittance for SuperKEKB	1819
	T. Higo, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, K. Furukawa, Y. Higashi, H. Honma, N. Iida, M. Ikeda, E. Kadokura, K. Kakihara, T. Kamitani, H. Katagiri, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, T. Mori, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, S. Ohsawa, M. Satoh, T. Shidara, A. Shirakawa, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou KEK, Ibaraki, Japan D. Satoh TIT, Tokyo, Japan
	The SuperKEKB is designed to produce 40 times luminosity than that of the KEKB. In order to realize such a high luminosity, the injector linac should provide both electron and positron beams of about 4-5 nC/bunch, which is several times higher than before. In addition, their emittance requirement of the injection beam to the rings is 20 microns, which is a factor of a few tens smaller than before. The intensity and emittance of the electron beam are realized directly by developing the photo RF gun. In contrast, the positron intensity is increased by adopting a higher capture efficiency system with flux concentrator followed by large-aperture accelerators, while its emittance is reduced by a damping ring. For preserving such a low emittance of both beams toward the injection to the rings, the suppression of the emittance growth is crucial. To this end, the alignment of the accelerator components should be a few tens of microns, where we need an improvement by more than a factor 10. The beam-based alignment is definitely needed with better-resolution BPMs. In the present paper are reviewed the overall progress and perspective of the design and the associated component developments.

Paper

Title

Page

Design Optimization of Flux Concentrator for SuperKEKB

1473

L. Zang, S. Fukuda, T. Kamitani, Y. Ogawa
KEK, Ibaraki, Japan

For high luminosity electron-positron colliders, intense positron beam production is one of the key issues as well as electron. Flux Concentrator (FC) is a pulsed solenoid that can generate high magnetic field of several Tesla and is often used for focusing positrons emerged from a production target. It works as an optical matching device in a positron capture section. With this device, high capture efficiency is achieved. In this paper, we will discuss a design optimization of a FC for the SuperKEKB positron source. Geometrical parameters of the FC are optimized to achieve high peak field using the CST EM Studio. Magnetic field distribution evaluated with the EM Studio is implemented into a particle tracking code to see a performance of the positron capture section. The tracking simulation includes a positron production at the target, focusing by the FC and subsequent solenoids and acceleration by RF structures till the end of the capture section. We report the results of a FC design optimized for higher positron yield with the tracking simulation.

TUPPD035

SuperKEKB Injector Upgrade for High Charge and Low Emittance Electron Beam

1482

M. Yoshida, N. Iida, Y. Ogawa, M. Sato, L. Zang
KEK, Ibaraki, Japan

The design strategy of SuperKEKB is based on the nano-beam scheme. The dynamic aperture decreases due to the very small beta function at the interaction point. Thus the injector upgrade is required to obtain the low emittance and high charge beam corresponding to the short beam life and small injection acceptance. The required beam parameters are 5 nC, 20 mm mrad and 4 nC, 6 mm mrad for the electron and positron respectively. For the electron beam, new photocathode RF-Gun with the focusing electric field was installed. Further the emittance growth in the linac is an important issue for the low emittance injection. We will report the machine study of the RF-Gun and the emittance growth through the linac.

TUPPR005

Linac Upgrade in Intensity and Emittance for SuperKEKB

1819

T. Higo, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, S. Fukuda, K. Furukawa, Y. Higashi, H. Honma, N. Iida, M. Ikeda, E. Kadokura, K. Kakihara, T. Kamitani, H. Katagiri, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, T. Mori, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, S. Ohsawa, M. Satoh, T. Shidara, A. Shirakawa, H. Sugimoto, T. Suwada, T. Takatomi, T. Takenaka, Y. Yano, K. Yokoyama, M. Yoshida, L. Zang, X. Zhou
KEK, Ibaraki, Japan
D. Satoh
TIT, Tokyo, Japan

The SuperKEKB is designed to produce 40 times luminosity than that of the KEKB. In order to realize such a high luminosity, the injector linac should provide both electron and positron beams of about 4-5 nC/bunch, which is several times higher than before. In addition, their emittance requirement of the injection beam to the rings is 20 microns, which is a factor of a few tens smaller than before. The intensity and emittance of the electron beam are realized directly by developing the photo RF gun. In contrast, the positron intensity is increased by adopting a higher capture efficiency system with flux concentrator followed by large-aperture accelerators, while its emittance is reduced by a damping ring. For preserving such a low emittance of both beams toward the injection to the rings, the suppression of the emittance growth is crucial. To this end, the alignment of the accelerator components should be a few tens of microns, where we need an improvement by more than a factor 10. The beam-based alignment is definitely needed with better-resolution BPMs. In the present paper are reviewed the overall progress and perspective of the design and the associated component developments.