IPAC2012 - List of Authors (Wang, G.M.)

Paper	Title	Page
MOPPR092	SVD-BASED METHOD FOR MEASUREMENT OF BEAM PARAMETERS AND FLAG RESOLUTION	999
	G.M. Wang, R.P. Fliller, I. Pinayev, T.V. Shaftan BNL, Upton, Long Island, New York, USA
	In NSLS II booster to storage ring transport line, the typical beam size in vertical plane is ~60 μm, which requires very high flag resolution to get good beam parameters measurement. This paper describes a new SVD-based method to measure transverse beam parameters and flag resolution simultaneously with double quads scan. Implementation simulations of the proposed method are performed for a dispersion free region in the NSLS-II booster to storage ring transport line. With this method, it breaks the limitation of beam parameters measurement accuracy duo to the flag resolution.

MOPPR094	Preparation for NSLS II Linac to Booster Transport Line Commissioning	1002
	G.M. Wang, M.A. Davidsaver, R.P. Fliller, G. Ganetis, H.-C. Hseuh, Y. Hu, D. Padrazo, T.V. Shaftan, G. Shen, O. Singh, Y. Tian, H. Xu, L. Yang BNL, Upton, Long Island, New York, USA
	The National Synchrotron Light Source II (NSLS-II) is a state-of-the-art 3-GeV third generation light source currently under construction at Brookhaven National Laboratory. The first part of the Linac to Booster Transport (LBT) line has been installed for the linac commissioning. This part will be used for the linac acceptance test. In this paper, we describe the preparation of the LBT sub-system integration test and the high level applications.

MOPPP051	NSLS-II Transport Line Progress	676
	R.P. Fliller, A.T. Anderson, B. Benish, W. DeBoer, G. Ganetis, R. Heese, H.-C. Hseuh, J. Hu, M.P. Johanson, B.N. Kosciuk, D. Padrazo, K. Roy, T.V. Shaftan, O. Singh, J.L. Tuozzolo, B. Wahl, G.M. Wang BNL, Upton, Long Island, New York, USA
	Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The National Synchrotron Light Source II (NSLS-II) is a state-of-the-art 3-GeV third generation light source currently under construction at Brookhaven National Laboratory. The NSLS-II injection system consists of a 200 MeV linac, a 3-GeV booster synchrotron and associated transfer lines. The first part of the Linac to Booster Transport (LBT) line has been installed for linac commissioning. This part includes all components necessary to commission the NSLS-II linac. The second part of this transport line is undergoing installation. Initial results of hardware commissioning will be discussed. The Booster to Storage Ring (BSR) transport line underwent a design review. The first part of the BSR transport line, consisting of all components necessary to commission the booster will be installed in 2012 for booster commissioning. We report on the final design of the BSR line along with the plan to commission the booster.

THPPR018	Development Progress of NSLS-II Accelerator Physics High Level Applications	4005
	L. Yang, J. Choi, Y. Hidaka, G. Shen, G.M. Wang BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the Department of Energy. The High Level Applications (HLA) for NSLS-II commissioning is a development in progress. It is in a client-server framework and uses Python programming language for scripting and graphical user interface application development. This new development provides both scripting and graphical user interface (GUI) controls. The services developed in controls group provide name server, archiving, machine snapshot etc. The clients are developed mainly in the physics group and have measurement, analysis and modeling capabilities.

Paper

Title

Page

SVD-BASED METHOD FOR MEASUREMENT OF BEAM PARAMETERS AND FLAG RESOLUTION

999

G.M. Wang, R.P. Fliller, I. Pinayev, T.V. Shaftan
BNL, Upton, Long Island, New York, USA

In NSLS II booster to storage ring transport line, the typical beam size in vertical plane is ~60 μm, which requires very high flag resolution to get good beam parameters measurement. This paper describes a new SVD-based method to measure transverse beam parameters and flag resolution simultaneously with double quads scan. Implementation simulations of the proposed method are performed for a dispersion free region in the NSLS-II booster to storage ring transport line. With this method, it breaks the limitation of beam parameters measurement accuracy duo to the flag resolution.

MOPPR094

Preparation for NSLS II Linac to Booster Transport Line Commissioning

1002

G.M. Wang, M.A. Davidsaver, R.P. Fliller, G. Ganetis, H.-C. Hseuh, Y. Hu, D. Padrazo, T.V. Shaftan, G. Shen, O. Singh, Y. Tian, H. Xu, L. Yang
BNL, Upton, Long Island, New York, USA

The National Synchrotron Light Source II (NSLS-II) is a state-of-the-art 3-GeV third generation light source currently under construction at Brookhaven National Laboratory. The first part of the Linac to Booster Transport (LBT) line has been installed for the linac commissioning. This part will be used for the linac acceptance test. In this paper, we describe the preparation of the LBT sub-system integration test and the high level applications.

MOPPP051

NSLS-II Transport Line Progress

676

R.P. Fliller, A.T. Anderson, B. Benish, W. DeBoer, G. Ganetis, R. Heese, H.-C. Hseuh, J. Hu, M.P. Johanson, B.N. Kosciuk, D. Padrazo, K. Roy, T.V. Shaftan, O. Singh, J.L. Tuozzolo, B. Wahl, G.M. Wang
BNL, Upton, Long Island, New York, USA

Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The National Synchrotron Light Source II (NSLS-II) is a state-of-the-art 3-GeV third generation light source currently under construction at Brookhaven National Laboratory. The NSLS-II injection system consists of a 200 MeV linac, a 3-GeV booster synchrotron and associated transfer lines. The first part of the Linac to Booster Transport (LBT) line has been installed for linac commissioning. This part includes all components necessary to commission the NSLS-II linac. The second part of this transport line is undergoing installation. Initial results of hardware commissioning will be discussed. The Booster to Storage Ring (BSR) transport line underwent a design review. The first part of the BSR transport line, consisting of all components necessary to commission the booster will be installed in 2012 for booster commissioning. We report on the final design of the BSR line along with the plan to commission the booster.

THPPR018

Development Progress of NSLS-II Accelerator Physics High Level Applications

4005

L. Yang, J. Choi, Y. Hidaka, G. Shen, G.M. Wang
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the Department of Energy.
The High Level Applications (HLA) for NSLS-II commissioning is a development in progress. It is in a client-server framework and uses Python programming language for scripting and graphical user interface application development. This new development provides both scripting and graphical user interface (GUI) controls. The services developed in controls group provide name server, archiving, machine snapshot etc. The clients are developed mainly in the physics group and have measurement, analysis and modeling capabilities.