| Paper | Title | Page |
|---|---|---|
| MOPPP008 | Hard X-ray Generation Experiment at Tsinghua Thomson Scattering X-Ray Source | 583 |
|
||
| Recently, there is increasing industrial and scientific interesting in ultra-fast, high peak brightness, tunable energy and polarization, monochromatic hard X-ray source. The X-ray source based on the Thomson scattering between the relativistic electron beam and TW laser pulse is the suitable candidate for its compact and affordable alternatives for high brightness hard monochromatic X-ray generation. Accelerator laboratory in Tsinghua University al so proposed and built Tsinghua Thomson scattering X-ray source. The hard x-ray pulse has been generated in experiment with 47 MeV electron and 20 TW laser in this year, and the parameters of the X-ray have been measured preliminarily. The experimental results are presented and discussed in this paper. | ||
| MOPPP009 | X-Ray Spectra Reconstruction of Thomson Scattering Source From Analysis of Attenuation Data | 586 |
|
||
| Thomson scattering X-ray source, in which the TW laser pulse is scattered by the relativistic electron beam, can provide ultra short, monochromatic, high flux, tunable polarized hard X-ray pulse which is can widely used in physical, chemical and biological process research, ultra-fast phase contrast imaging, and so on. Since the pulse duration of X-ray is as short as picosecond and the flux in one pulse is high, it is difficult to measure the x-ray spectrum. In this paper, we present the X-ray spectrum measurement experiment on Tsinghua Thomson scattering. The preliminary experimental results shows the maximum X-ray energy is about 47 keV, which is agree well with the simulations. | ||
| TUPPC024 | R&D of an Ultrafast Probe Apparatus Based on MeV Electron Diffraction at Tsinghua University | 1215 |
|
||
|
Funding: This work is supported by National Natural Science Foundation of China and National Basic Research Program of China (973 Program). An ultrafast probe apparatus based on MeV ultrafast electron diffraction is developed at Tsinghua University. It aims at generating 1.5 to 3 MeV pulse with sub-pC charge and sub-ps pulse length for pump-probe experiments. It consists of an S-band 1.6-cell radiofrequency photocathode gun, a solenoid, a sample chamber, a deflecting cavity, a detection system and other diagnostics tools. Simulations show the position of solenoid coil affects the spot size on detection screen and the charge of collimated bunch significantly. The collimator is found to be helpful to stabilize the charge of collimated bunch and reduce its normalized emittance. The construction of the apparatus is almost finished and the commissioning test will start soon. |
||
| TUPPD069 | Schottky-Enabled Photoemission and Dark Current Measurements - Toward an Alternate Approach to Fowler-Nordheim Plot Analysis | 1563 |
|
||
| Field-emitted dark current, a major gradient-limiting factor in RF cavities, is usually analyzed via Fowler-Nordheim (FN) plots. Traditionally, field emission is attributed to geometrical perturbations on the bulk surface whose field enhancement factor (beta) and the emitting area (A) can be extracted from the FN plot. Field enhancement factors extracted in this way are typically much too high (1 to 2 orders of magnitude) to be explainable by either the geometric projection model applied to the measured surface roughness or by field enhancement factors extracted from Schottky-enabled photoemission measurements. We compare traditional analysis of FN plots to an alternate approach employing local work function variation. This is illustrated by comparative analysis of recent dark current and Schottky-enabled photoemission data taken at Tsinghua S-band RF gun. We conclude by describing a possible experimental plan for discrimination of variation of local work function vs. local field enhancement. | ||
| TUPPR015 | Choke-Mode Damped Structure Design for the CLIC Main Linac | 1840 |
|
||
| Choke-mode damped accelerating structures are being studied as an alternative to the CLIC waveguide damped baseline structure. Choke-mode structures hold the potential for much lower pulsed surface heating and reduced cost since no milling is required. We propose a new choke geometry which has significant suppression of higher order dipoles. By impedance matching and detuning of the first dipole pass-band, the wakefield suppression is comparable to the baseline design with waveguide damping. A fully featured choke mode structure with the same accelerating gradient profile and filling time as the nominal CLIC design has been designed. It has the potential to replace the waveguide damped design without changing any of the machine layout or the beam parameters. | ||