IPAC2012 - List of Authors (Pattalwar, S.M.)

Paper	Title	Page
MOPPC049	Status of the Non-scaling Fixed Field Alternating Gradient Ring Design for the International Design Study of the Neutrino Factory	241
	J.S. Berg, H. Witte BNL, Upton, Long Island, New York, USA M. Aslaninejad, J. Pasternak Imperial College of Science and Technology, Department of Physics, London, United Kingdom N. Bliss, A.J. Moss STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom D.J. Kelliher, S. Machida STFC/RAL/ASTeC, Chilton, Didcot, Oxon, United Kingdom S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: This manuscript has been authored by employees of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The International Design Study of the Neutrino Factory is working towards delivering the optimized design of the neutrino factory facility to be presented in the Reference Design Report (RDR) in 2013. In the current baseline design a linear non-scaling fixed field alternating gradient accelerator (FFAG) was chosen as an efficient solution for the final muon acceleration. We describe updates to the design since our previous report. We report on beam dynamics studies on the lattice. We describe recent work on the engineering for the lattice, and the results of a recent first pass at a cost estimate for the machine. Finally, we describe how an FFAG may be applicable to a lower energy neutrino factory in light of recent experimental results regarding the value of the theta(13) neutrino mixing angle. J. S. Berg et al., in Proceedings of IPAC2011, San Sebastian, Spain, 832. ** F. P. An et al., Phys. Rev. Lett. 10⁸, 171803 (2012); J. K. Ahn et al., arXiv:1204.0626v2 [hep-ex] (2012).

WEPPC031	Completed Assembly of the Daresbury International ERL Cryomodule and its Implementation on ALICE	2272
	P.A. McIntosh, M.A. Cordwell, P.A. Corlett, P. Davies, E. Frangleton, P. Goudket, K.J. Middleman, S.M. Pattalwar, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom S.A. Belomestnykh BNL, Upton, Long Island, New York, USA A. Büchner, F.G. Gabriel, P. Michel HZDR, Dresden, Germany J.N. Corlett, D. Li, S.M. Lidia LBNL, Berkeley, California, USA G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin, V. Veshcherevich CLASSE, Ithaca, New York, USA T.J. Jones, J. Strachan STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom R.E. Laxdal TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada D. Proch, J.K. Sekutowicz DESY, Hamburg, Germany T.I. Smith Stanford University, Stanford, California, USA
	The completion of an optimised SRF cryomodule for application on ERL accelerators has now culminated with the successful assembly of an integrated cryomodule, following an intensive 5 years of development evolution. The cryomodule, which incorporates 2 x 7-cell 1.3 GHz accelerating structures, 3 separate layers of magnetic shielding, fully adjustable & high power input couplers and fast piezo tuners, has been installed on the ALICE ERL facility at Daresbury Laboratory. It is intended that this will permit operational optimisation for maximised efficiency demonstration, through increased Qext adjustment whilst retaining both effective energy recovery and IR-FEL lasing. The collaborative design processes employed in completing this new cryomodule development are explained, along with the assembly and implementation procedures used to facilitate its successful installation on the ALICE ERL facility.

Paper

Title

Page

Status of the Non-scaling Fixed Field Alternating Gradient Ring Design for the International Design Study of the Neutrino Factory

241

J.S. Berg, H. Witte
BNL, Upton, Long Island, New York, USA
M. Aslaninejad, J. Pasternak
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
N. Bliss, A.J. Moss
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
D.J. Kelliher, S. Machida
STFC/RAL/ASTeC, Chilton, Didcot, Oxon, United Kingdom
S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

Funding: This manuscript has been authored by employees of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The International Design Study of the Neutrino Factory is working towards delivering the optimized design of the neutrino factory facility to be presented in the Reference Design Report (RDR) in 2013. In the current baseline design a linear non-scaling fixed field alternating gradient accelerator (FFAG) was chosen as an efficient solution for the final muon acceleration. We describe updates to the design since our previous report*. We report on beam dynamics studies on the lattice. We describe recent work on the engineering for the lattice, and the results of a recent first pass at a cost estimate for the machine. Finally, we describe how an FFAG may be applicable to a lower energy neutrino factory in light of recent experimental results regarding the value of the theta(13) neutrino mixing angle**.
* J. S. Berg et al., in Proceedings of IPAC2011, San Sebastian, Spain, 832.
** F. P. An et al., Phys. Rev. Lett. 10⁸, 171803 (2012); J. K. Ahn et al., arXiv:1204.0626v2 [hep-ex] (2012).

WEPPC031

Completed Assembly of the Daresbury International ERL Cryomodule and its Implementation on ALICE

2272

P.A. McIntosh, M.A. Cordwell, P.A. Corlett, P. Davies, E. Frangleton, P. Goudket, K.J. Middleman, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
S.A. Belomestnykh
BNL, Upton, Long Island, New York, USA
A. Büchner, F.G. Gabriel, P. Michel
HZDR, Dresden, Germany
J.N. Corlett, D. Li, S.M. Lidia
LBNL, Berkeley, California, USA
G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin, V. Veshcherevich
CLASSE, Ithaca, New York, USA
T.J. Jones, J. Strachan
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
R.E. Laxdal
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
D. Proch, J.K. Sekutowicz
DESY, Hamburg, Germany
T.I. Smith
Stanford University, Stanford, California, USA

The completion of an optimised SRF cryomodule for application on ERL accelerators has now culminated with the successful assembly of an integrated cryomodule, following an intensive 5 years of development evolution. The cryomodule, which incorporates 2 x 7-cell 1.3 GHz accelerating structures, 3 separate layers of magnetic shielding, fully adjustable & high power input couplers and fast piezo tuners, has been installed on the ALICE ERL facility at Daresbury Laboratory. It is intended that this will permit operational optimisation for maximised efficiency demonstration, through increased Qext adjustment whilst retaining both effective energy recovery and IR-FEL lasing. The collaborative design processes employed in completing this new cryomodule development are explained, along with the assembly and implementation procedures used to facilitate its successful installation on the ALICE ERL facility.