Paper | Title | Page |
---|---|---|
MOEPPB003 | Status of the PRISM FFAG Design for the Next Generation Muon-to-Electron Conversion Experiment | 79 |
|
||
The PRISM Task Force continues to study high intensity and high quality muon beams needed for next generation lepton flavor violation experiments. In the PRISM case such beams have been proposed to be produced by sending a short proton pulse to a pion production target, capturing the pions and performing RF phase rotation on the resulting muon beam in an FFAG ring. This paper summarizes the current status of the PRISM design obtained by the Task Force. In particular various designs for the PRISM FFAG ring are discussed and their performance compared to the baseline one, the injection/extraction systems and matching to the solenoid channels upstream and downstream of the FFAG ring are presented. The feasibility of the construction of the PRISM system is discussed. | ||
MOPPC049 | Status of the Non-scaling Fixed Field Alternating Gradient Ring Design for the International Design Study of the Neutrino Factory | 241 |
|
||
Funding: This manuscript has been authored by employees of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The International Design Study of the Neutrino Factory is working towards delivering the optimized design of the neutrino factory facility to be presented in the Reference Design Report (RDR) in 2013. In the current baseline design a linear non-scaling fixed field alternating gradient accelerator (FFAG) was chosen as an efficient solution for the final muon acceleration. We describe updates to the design since our previous report*. We report on beam dynamics studies on the lattice. We describe recent work on the engineering for the lattice, and the results of a recent first pass at a cost estimate for the machine. Finally, we describe how an FFAG may be applicable to a lower energy neutrino factory in light of recent experimental results regarding the value of the theta(13) neutrino mixing angle**. * J. S. Berg et al., in Proceedings of IPAC2011, San Sebastian, Spain, 832. ** F. P. An et al., Phys. Rev. Lett. 108, 171803 (2012); J. K. Ahn et al., arXiv:1204.0626v2 [hep-ex] (2012). |
||
MOPPD036 | Gabor Lens Focusing for Medical Applications | 442 |
|
||
The widespread introduction of Hadron therapy for cancer treatment is inhibited by the large costs for the accelerator and treatment facility and the subsequent maintenance costs which reflects into the cost per treatment. In the long term future (laser) plasma wakefield accelerated hadrons could offer compact treatment devices with significantly reduced treatment costs. In the moment the particle distributions produced by such accelerators do not fulfill the medical requirements by far. Never the less steady progress on the field might change the situation in the future. Beside the reliable production of a sufficient number of ions at the required energy the formation of a particle beam suitable for treatment from the burst of ions created in the acceleration process is one of the major challenges. While conventional optical systems will be operating at the technical limits which would be contradictory to the cost argument, space charge lenses of the Gabor type might be a cost effective alternative. In this paper a beam line consisting of such lenses will be presented together with particle transport simulations. | ||
TUPPD008 | Recent Progress Toward a Muon Recirculating Linear Accelerator | 1422 |
|
||
Both Neutrino Factories (NF) and Muon Colliders (MC) require very rapid acceleration due to the short lifetime of muons. After a capture and bunching section, a linac raises the energy to about 900 MeV, and is followed by one or more Recirculating Linear Accelerators (RLA), possibly followed by a Rapid Cycling Synchrotron (RCS) or Fixed-Field Alternating Gradient (FFAG) ring. A RLA reuses the expensive RF linac section for a number of passes at the price of having to deal with different energies within the same linac. Various techniques including pulsed focusing quadrupoles, beta frequency beating, and multipass arcs have been investigated via simulations to improve the performance and reduce the cost of such RLAs. | ||
THPPD049 | Conceptual Design of a Superconducting Septum for FFAGs | 3620 |
|
||
Funding: This work was supported by STFC grant ST/G008531/1 and EPSRC Grant EP/E032869/1. The fixed magnetic field in FFAG (Fixed Field Alternating Gradient) accelerators means that particles can be accelerated very rapidly. This makes them attractive candidates for many applications, for example for accelerating muons for a neutrino factory or for charged particle therapy (CPT). To benefit fully from this the particles have to be extracted at the same rate. In combination with the high magnetic rigidity of the particles this represents a significant challenge, especially where variable energy extraction is required, which implies extraction at variable radius. This paper presents a conceptual design of a 4T superconducting septum for the PAMELA accelerator, which is an FFAG for a combined proton/carbon ion therapy facility. The field in the septum is varied as a function of the horizontal position, which allows variable energy extraction without the need for sweeping of the magnetic field. |
||
THPPP051 | Status of the RAL Front End Test Stand | 3856 |
|
||
The Front End Test Stand (FETS) under construction at RAL is a demonstrator for front end systems of a future high power proton linac. Possible applications include a linac upgrade for the ISIS spallation neutron source, new future neutron sources, accelerator driven sub-critical systems, a neutrino factory etc. Designed to deliver a 60mA H-minus beam at 3MeV with a 10% duty factor, FETS consists of a high brightness ion source, magnetic low energy beam transport (LEBT), 4-vane 324MHz radio frequency quadrupole, medium energy beam transport (MEBT) containing a high speed beam chopper plus comprehensive diagnostics. This paper describes the current status of the project and future plans. | ||