ICALEPCS2017 - List of Authors (Kudou, T.)

Paper	Title	Page
THMPA07	Improvement of Temperature and Humidity Measurement System for KEK Injector Linac	1323
	I. Satake, M. Satoh, T. Suwada, Y. Yano KEK, Ibaraki, Japan T. Kudou, S. Kusano, Y. Mizukawa Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
	A temperature and humidity measurement system at the KEK injector linac consists of 26 data loggers connected to around 700 temperature and humidity sensors, one EPICS IOC, and CSS archiver. CSS archiver engine retrieves the temperature and humidity data measured by the data loggers via Ethernet. These data are finally stored into the PostgreSQL based database. A new server computer has been recently utilized for the archiver of CSS version 4 instead of version 3. It can drastically improve the speed performance for retrieving the archived data. The long-term beam stability of linac is getting a quite important figure of merit since the simultaneous top up injection is required for the independent four storage rings toward the SuperKEKB Phase II operation. For this reason, we developed a new archiver data management application with a good operability. Since it can bring the operators a quick detection of anomalous behavior of temperature and humidity data resulting in the deterioration of beam quality, the improved temperature and humidity measurement system can be much effective. We will report the detailed system description and practical application to the daily beam operation.
	Slides THMPA07 [2.221 MB]
	Poster THMPA07 [1.892 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THMPA07
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA064	Control System Status of SuperKEKB Injector Linac	1522
	M. Satoh, Y. Enomoto, K. Furukawa, F. Miyahara, T. Natsui, I. Satake, Y. Seimiya, H. Sugimura, T. Suwada KEK, Ibaraki, Japan K. Hisazumi, T. Kudou, Y. Kuroda, S. Kusano, Y. Mizukawa, S. Ushimoto Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan T. Ohfusa, H.S. Saotome, M. Takagi Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan
	The Phase I beam commissioning of SuperKEKB has been conducted from February to June in the last year. The injector linac has successfully delivered the electron and positron beams to the SuperKEKB main ring. The linac beam studies and subsystem developments are also intensively going on together with the daily normal beam injection to both rings of the SuperKEKB and two light sources. Towards Phase II and III beam commissioning of SuperKEKB, one of key issues is a fine beam control with the new beam position monitor readout system, a positron capture system based on the flux concentrator, a pulsed quadrupole and steering magnets, and a low emittance photo-cathode rf electron source. In this paper, we report the control system status of SuperKEKB injector linac together with the commissioning result of Phase I. In addition, the improvement plant of injector control system is also mentioned.
	Poster THPHA064 [0.808 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Improvement of Temperature and Humidity Measurement System for KEK Injector Linac

1323

I. Satake, M. Satoh, T. Suwada, Y. Yano
KEK, Ibaraki, Japan
T. Kudou, S. Kusano, Y. Mizukawa
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan

A temperature and humidity measurement system at the KEK injector linac consists of 26 data loggers connected to around 700 temperature and humidity sensors, one EPICS IOC, and CSS archiver. CSS archiver engine retrieves the temperature and humidity data measured by the data loggers via Ethernet. These data are finally stored into the PostgreSQL based database. A new server computer has been recently utilized for the archiver of CSS version 4 instead of version 3. It can drastically improve the speed performance for retrieving the archived data. The long-term beam stability of linac is getting a quite important figure of merit since the simultaneous top up injection is required for the independent four storage rings toward the SuperKEKB Phase II operation. For this reason, we developed a new archiver data management application with a good operability. Since it can bring the operators a quick detection of anomalous behavior of temperature and humidity data resulting in the deterioration of beam quality, the improved temperature and humidity measurement system can be much effective. We will report the detailed system description and practical application to the daily beam operation.

Slides THMPA07 [2.221 MB]

Poster THMPA07 [1.892 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THMPA07

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA064

Control System Status of SuperKEKB Injector Linac

1522

M. Satoh, Y. Enomoto, K. Furukawa, F. Miyahara, T. Natsui, I. Satake, Y. Seimiya, H. Sugimura, T. Suwada
KEK, Ibaraki, Japan
K. Hisazumi, T. Kudou, Y. Kuroda, S. Kusano, Y. Mizukawa, S. Ushimoto
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
T. Ohfusa, H.S. Saotome, M. Takagi
Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan

The Phase I beam commissioning of SuperKEKB has been conducted from February to June in the last year. The injector linac has successfully delivered the electron and positron beams to the SuperKEKB main ring. The linac beam studies and subsystem developments are also intensively going on together with the daily normal beam injection to both rings of the SuperKEKB and two light sources. Towards Phase II and III beam commissioning of SuperKEKB, one of key issues is a fine beam control with the new beam position monitor readout system, a positron capture system based on the flux concentrator, a pulsed quadrupole and steering magnets, and a low emittance photo-cathode rf electron source. In this paper, we report the control system status of SuperKEKB injector linac together with the commissioning result of Phase I. In addition, the improvement plant of injector control system is also mentioned.

Poster THPHA064 [0.808 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)