ICALEPCS2017 - List of Authors (Chang, J.J.)

Paper	Title	Page
TUPHA012	New Control System for LAPECR2	394
	J.J. Chang, S. An, X.J. Liu, P.P. Wang, Y.J. Yuan, W. Zhang IMP/CAS, Lanzhou, People's Republic of China
	Lanzhou All Permanent magnet ECR ion source No.2 (LAPECR2) is the ion source for 320 kV multidiscipline research platform for highly charged ions. Its old control system has been used for nearly 12 years and some prob-lems have been gradually exposed and affected its daily operation. A set of PLC from Beckhoff company is in charge of the control of magnet power supplies, diagnos-tics and motion control. EPICS and Control System Studio (CSS) as well other packages are used in this facility as the control software toolkit. Based on these state-of-the-art technologies on both hardware and software, this paper designed and implemented a new control system for LAPECR2. After about half a year of running, the new control reflects its validity and stability in this facility.
	Poster TUPHA012 [0.332 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA193	Vacuum Control System of SSC-Linac	884
	X.J. Liu, S. An, J.J. Chang, Y. Chen, J.Q. Wu, W. Zhang IMP/CAS, Lanzhou, People's Republic of China
	SSC-Linac is a linear accelerator injector of SSC in HIRFL. The vacuum control system is based on EPICS which is a real-time distributed control software. The Labview real-time VIs and EPICS VIs were used to design Input/Output Controller(IOC).The different kinds of CRIO modules were adopt in device layer, which can monitor the serial port data from vacuum gauges and contol vacuum valves. The whole control system can acquire vacuum data, control vacuum devices remotely, make the pressure value of the vacuum gauge and vacuum valve interlocked. It also keeps the equipment work stable and the beam has a high quality.
	Poster TUPHA193 [0.952 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA193
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA010	Upgrade the Control System of HIRFL-CSR Based-on EPICS	1356
	S. An, J.J. Chang, L. Ge, X.J. Liu, P.P. Wang, J.Q. Wu, W. Zhang, Y.B. Zhou IMP/CAS, Lanzhou, People's Republic of China
	Control system of HIRFL-CSR accelerator is now upgrading to new architecture based on Experimental Physics and Industrial Control System (EPICS). Design and implement power supply subsystem, data distribution subsystem, data acquisition subsystem, etc. This paper describes the design and implementation of the control system and introduce the next work for upgrading synchronization subsystem and middle/high level applications.
	Poster THPHA010 [1.283 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

New Control System for LAPECR2

394

J.J. Chang, S. An, X.J. Liu, P.P. Wang, Y.J. Yuan, W. Zhang
IMP/CAS, Lanzhou, People's Republic of China

Lanzhou All Permanent magnet ECR ion source No.2 (LAPECR2) is the ion source for 320 kV multidiscipline research platform for highly charged ions. Its old control system has been used for nearly 12 years and some prob-lems have been gradually exposed and affected its daily operation. A set of PLC from Beckhoff company is in charge of the control of magnet power supplies, diagnos-tics and motion control. EPICS and Control System Studio (CSS) as well other packages are used in this facility as the control software toolkit. Based on these state-of-the-art technologies on both hardware and software, this paper designed and implemented a new control system for LAPECR2. After about half a year of running, the new control reflects its validity and stability in this facility.

Poster TUPHA012 [0.332 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA193

Vacuum Control System of SSC-Linac

884

X.J. Liu, S. An, J.J. Chang, Y. Chen, J.Q. Wu, W. Zhang
IMP/CAS, Lanzhou, People's Republic of China

SSC-Linac is a linear accelerator injector of SSC in HIRFL. The vacuum control system is based on EPICS which is a real-time distributed control software. The Labview real-time VIs and EPICS VIs were used to design Input/Output Controller(IOC).The different kinds of CRIO modules were adopt in device layer, which can monitor the serial port data from vacuum gauges and contol vacuum valves. The whole control system can acquire vacuum data, control vacuum devices remotely, make the pressure value of the vacuum gauge and vacuum valve interlocked. It also keeps the equipment work stable and the beam has a high quality.

Poster TUPHA193 [0.952 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA193

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPHA010

Upgrade the Control System of HIRFL-CSR Based-on EPICS

1356

S. An, J.J. Chang, L. Ge, X.J. Liu, P.P. Wang, J.Q. Wu, W. Zhang, Y.B. Zhou
IMP/CAS, Lanzhou, People's Republic of China

Control system of HIRFL-CSR accelerator is now upgrading to new architecture based on Experimental Physics and Industrial Control System (EPICS). Design and implement power supply subsystem, data distribution subsystem, data acquisition subsystem, etc. This paper describes the design and implementation of the control system and introduce the next work for upgrading synchronization subsystem and middle/high level applications.

Poster THPHA010 [1.283 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)