IBIC2013 - List of Authors (Tauchi, T.)

Paper

Title

Page

Cavity Beam Position Monitor System for ATF2

120

S.T. Boogert
Royal Holloway, University of London, Surrey, United Kingdom
S.T. Boogert, F.J. Cullinan, Y.I. Kim, A. Lyapin, J. Snuverink
JAI, Egham, Surrey, United Kingdom
T. Tauchi, N. Terunuma, J. Urakawa
KEK, Ibaraki, Japan
G.R. White
SLAC, Menlo Park, California, USA

The Accelerator Test Facility 2 (ATF2) in KEK, Japan, is a prototype scaled demonstrator system for the final focus required for a future high energy lepton linear collider. The ATF2 beam-line is instrumented with a total of 38 C- and S- band resonant cavity beam position monitors (CBPM) with associated mixer electronics and digitizers. The current status of the BPM system is described, including a study of the CBPM performance over a three week period, including systematic effects such as charge, bunch length and beam offset dependence. The BPM system is routinely used for beam based alignment, wakefield kick measurements and dispersion measurements, the operational experience and example measurements are also reported.

TUPC22

Cavity Beam Position Monitor in Multiple Bunch Operation for the ATF2 Interaction Point Region

419

Y.I. Kim, D.R. Bett, N. Blaskovic Kraljevic, S.T. Boogert, P. Burrows, G.B. Christian, M.R. Davis, A. Lyapin, C. Perry
JAI, Oxford, United Kingdom
J.C. Frisch, D.J. McCormick, J. Nelson, G.R. White
SLAC, Menlo Park, California, USA
Y. Honda, T. Tauchi, N. Terunuma, J. Urakawa
KEK, Ibaraki, Japan

The Accelerator Test Facility 2 (ATF2) at KEK, Japan, is a scaled test beam line for the international linear collider (ILC) final focus system. There are two goals: firstly, to demonstrate focusing to 37 nm vertical beam size; secondly, to achieve a few nanometer level beam orbit stability at the focus point (the Interaction Point (IP)) in the vertical plane. High-resolution beam position monitors around the IP area (IPBPMs) have been developed in order to measure the electron beam position in that region with a resolution of a few nanometers in the vertical plane. Currently, the standard operation mode at ATF2 is single bunch, however, multiple bunch operation with a bunch spacing similar to the one foreseen for the ILC (around 300 ns) is also possible. IPBPMs have a low Q value resulting in a decay time of about 30 ns, and so should be able to measure the beam position of individual bunches without any significant performance degradation. The IPBPMs in the ATF2 extraction beam line have been tested in multibunch regime. This paper analyses the signals, processing methods and results for this mode.

Poster TUPC22 [1.050 MB]

Paper	Title	Page
MOPC27	Cavity Beam Position Monitor System for ATF2	120
	S.T. Boogert Royal Holloway, University of London, Surrey, United Kingdom S.T. Boogert, F.J. Cullinan, Y.I. Kim, A. Lyapin, J. Snuverink JAI, Egham, Surrey, United Kingdom T. Tauchi, N. Terunuma, J. Urakawa KEK, Ibaraki, Japan G.R. White SLAC, Menlo Park, California, USA
	The Accelerator Test Facility 2 (ATF2) in KEK, Japan, is a prototype scaled demonstrator system for the final focus required for a future high energy lepton linear collider. The ATF2 beam-line is instrumented with a total of 38 C- and S- band resonant cavity beam position monitors (CBPM) with associated mixer electronics and digitizers. The current status of the BPM system is described, including a study of the CBPM performance over a three week period, including systematic effects such as charge, bunch length and beam offset dependence. The BPM system is routinely used for beam based alignment, wakefield kick measurements and dispersion measurements, the operational experience and example measurements are also reported.

TUPC22	Cavity Beam Position Monitor in Multiple Bunch Operation for the ATF2 Interaction Point Region	419
	Y.I. Kim, D.R. Bett, N. Blaskovic Kraljevic, S.T. Boogert, P. Burrows, G.B. Christian, M.R. Davis, A. Lyapin, C. Perry JAI, Oxford, United Kingdom J.C. Frisch, D.J. McCormick, J. Nelson, G.R. White SLAC, Menlo Park, California, USA Y. Honda, T. Tauchi, N. Terunuma, J. Urakawa KEK, Ibaraki, Japan
	The Accelerator Test Facility 2 (ATF2) at KEK, Japan, is a scaled test beam line for the international linear collider (ILC) final focus system. There are two goals: firstly, to demonstrate focusing to 37 nm vertical beam size; secondly, to achieve a few nanometer level beam orbit stability at the focus point (the Interaction Point (IP)) in the vertical plane. High-resolution beam position monitors around the IP area (IPBPMs) have been developed in order to measure the electron beam position in that region with a resolution of a few nanometers in the vertical plane. Currently, the standard operation mode at ATF2 is single bunch, however, multiple bunch operation with a bunch spacing similar to the one foreseen for the ILC (around 300 ns) is also possible. IPBPMs have a low Q value resulting in a decay time of about 30 ns, and so should be able to measure the beam position of individual bunches without any significant performance degradation. The IPBPMs in the ATF2 extraction beam line have been tested in multibunch regime. This paper analyses the signals, processing methods and results for this mode.
	Poster TUPC22 [1.050 MB]